描述: Baudcom BD-100M系列以太网媒体转换器将来自双绞线的10 / 100Base-TX到10 / 100BASE-FX光纤光缆传输信号。 它基于SNMP的智能化的网络管理,通过它用户可以监视并轻松地配置电口和中心底盘和远程独立的光口。
产品特点: - 符合IEEE802.3,IEEE802.3u标准(10BASE-T,100BASE-TX,100BaseT的-FX)的国际标准;
- 带来1M缓存,支持2KMAC地址;
- 有效隔离网络冲突和广播包,具有防止广播风暴功能;
- 支持802.1Q和16组VLAN的;
- 多模连接:发射maximrange能达到5公里;
- 单模连接:传输距离可以达到120公里。
- 内置电源或内置了电源;
- 支持10 / 100M全/半双工适应和强迫性集10M; 100M; 全双工; 半双工; 然后方便连接CPE和保护以前的投资,当网络升级;
- 可实现SNMP管理,并安装了19英寸2U机箱
技术参数: 光纤接口: 支持的100Base-FX 1)采用标准1 * 9针光收发模块; 2)波长:850纳米或1310在多模。 1310nm或1550nm单模; 3)SC / ST / FC光纤连接器是可选的。 4)传输距离:120公里;
以太网电口: 数据传输率:10 / 100Mbps的; 1)在全/半双工拓扑自动协商; 2)连接器:UTP RJ45连接器 3)自动MDI / MDI-X
环境条件尺寸 工作温度:0℃〜+ 50℃210(W)¡140(L)×30(高)mm 储存温度:-20℃〜+ 70℃ 相对温度:95%(未冷凝) 电源 工作电压范围宽,良好的 防干扰和隔离,工作稳定 选择我 - 直流-48V,范围DC-36V〜DC-72C 选择我 - AC220,范围AC160V〜AC240V 应用: |
Description: Baudcom BD-100M series Ethernet Media Converter translates transmission signals from a twisted-pair 10/100Base-Tx to 10/100Base-FX fiber optical cable. It has SNMP based intelligent network management, by which user can monitor and configure the copper port and the optical port of center chassis and remote standalone easily.
Features: - Conforms to IEEE802.3, IEEE802.3u (10Base-T; 100Base-TX; 100BaseT-FX) international standard;
- brings 1M buffer, supports 2KMAC address;
- isolates network conflict and broadcasting package effectively, has the function of preventing broadcasting storm;
- supports 802.1Q and 16 groups of VLAN;
- multi- mode connection: transmitting maximrange can reach 5 kilometers ;
- single-mode connection: transmitting range can reach 120 kilometers.
- built-in power supply or built-out power supply;
- support both 10/100M full/ half duplex adapt and compulsive set 10M; 100M; full duplex; half duplex; then convenient to connect CPE and protect previous invest when network upgrades;
- could realize SNMP management, and install our 19inch 2U chassis
Specifications: Optical Port: Support 100Base-FX 1) Adopt standard 1*9 pin optical transceiver module; 2) Wavelength: 850nm or 1310nm in multi-mode. 1310nm or 1550nm in single-mode; 3) SC/ ST/ FC optical connectors are selectable. 4) Transmission distance: Up to 120km ;
Ethernet Copper Port: Data rate: 10/100Mbps; 1) Auto-negotiate on Full/ Half duplex topology; 2) Connector: UTP RJ45 connector 3) Auto MDI/ MDI-X
environment condition Dimension Operating temperature: 0C~+50 C 210 (W) ¡Á 140 (L) x 30 (H) mm Storage temperature: -20 C~+70 C Relative temperature: 95% (uncondensed) Power supply working voltage range wide, good anti-disturb and Isolation, work stable option I - DC-48V, range DC-36V~DC-72C option I - AC220, range AC160V~AC240V Application: |