Baudcom 8通道串口服务器（BD-8SERIAL-ETH）的设计，让您的工业用串口设备立即联网，在任何时间。 在BD-8SERIAL-ETH设备服务器是一种用于连接RS-232或理想的选择RS-422/485串口devices¡ªsuch如PLC，仪表和sensors¡ªto基于IP的以太网LAN，从而有可能为你的软件 从任何地方访问串口设备通过局域网或互联网。 用户可以配置8serial端口如RS232或RS422或RS485，这对于customer¡¯s应用，降低成本非常方便。

在BD-8SERIAL-ETH串行设备服务器保证网络的软件，它使用标准的网络API（Winsock的或BSD Sockets）的通过提供TCP服务器模式，TCP客户端模式和UDP模式的兼容性。 这项特点不但你的软件投资，让您享受即时的网络串口设备的好​​处。

在BD-8SERIAL-ETH串行设备服务器支持通过便利的网络浏览器控制台自动IP配置协议（DHCP）和手动配置。 这两种方法确保快速有效的安装。 并与BD-8SERIAL-ETH¡¯sWindows工具，用户可以搜索本地局域网的串行设备服务器，也可以配置，管理和监控工作状态。

1.采用嵌入式实时操作系统£¬It¡¯s性能稳定可靠。

2.它提供了丰富的工作模式，以实现串口设备连接到网络即时。

3.它支持的Real COM / TTY驱动器是完全原始的软件系统兼容

4.它有一个一般的透明​​传输模式，即TCP服务器，TCP客户端和UDP。

5.它支持对从/对主模式和反向Telnet方式。

6.我们可以配置和管理，通过Web浏览器或Telnet终端。

7.支持管理软件在Windows平台上，提供了强大的管理功能。

8.我们可以自由选择RS232 / RS422 / RS485串行类型。

9，它采用了10 / 100M自适应以太网口。

10.嵌入了15KV ESD浪涌保护。

11.串行通信的速率高达460.8kbps

²通过IP网络连接的串口设备到服务器的应用程序

²通过IP网络管理的远程串行控制台端口

调制解调器的应用程序²虚拟调制解调器功能

10 / 100Mbps的速率

全/半双工自动协商
协议：支持IEEE 802.3
RJ45连接器

电磁隔离保护：1.5 KV内置

软件和硬件流控制

接线端子（每个端口3个引脚）

TX和RX活动指标

l数据位：5,6; 7; 8

停止位为1，2

，奇偶校验：无; 甚至; 奇; 空间; 标记

升波特率：110 bps至460.8 Kbps的

RS-232：TXD引脚; RxD端; GND

RS-422：TX +; TX-; RX +; RX-; GND

RS-485-2w：数据+; 数据-; GND

l网络协议：ICMP，IP，TCP，UDP，HTTP，ARP。

L构选项：内置的WEB服务器。

升的Windows虚拟COM驱动程序：在Windows 2000 / XP / 2003 / VISTA / 2008/7

尺寸：

183 x约88 x30毫米

工作温度：0〜50¡ãC

储存温度：-40〜85¡ãC

环境相对湿度：5％至95％（无冷凝）

输入电压：

5 VDC; -48VDC; 110VAC和220VAC（见订购信息）

功耗：（5瓦特

Baudcom 8channels serial servers (BD-8SERIAL-ETH) are are designed to make your industrial serial devices Internet ready in no time. The BD-8SERIAL-ETH device servers is the ideal choice for connecting your RS-232 or RS-422/485 serial devices¡ªsuch as PLCs, meters, and sensors¡ªto an IP-based Ethernet LAN, making it possible for your software to access serial devices from anywhere over a local LAN or the Internet. The user can configure the 8serial ports as RS232 or RS422 or RS485, which is very convenient for customer¡¯s application and reducing cost.

The BD-8SERIAL-ETH serial device servers ensure the compatibility of network software that uses a standard network API (Winsock or BSD Sockets) by providing TCP Server Mode, TCP Client Mode, and UDP Mode. This excellent feature preserves your software investment and lets you enjoy the benefits of networking your serial devices instantly.

The BD-8SERIAL-ETH serial device servers support automatic IP configuration protocols (DHCP) and manual configuration via the handy web browser console. Both methods ensure quick and effective installation. And with the BD-8SERIAL-ETH¡¯s Windows Utility, User can search the serial device servers of local LAN , also can config , manager and monitor working state.

1. It use embedded real-time operating system£¬It¡¯s stable and reliable performance .

2. It provides rich working mode to realize the serial devices connect to network immediately.

3. It supports the Real com/ TTY drive that is compatible with the original software system completely

4. It has a general transparent transmission mode that is TCP Server, Tcp Client and UDP.

5. It supports Pair Slave/ Pair Master Mode and reverse Telnet Mode.

6. We can config and manage through Web browser or Telnet terminal.

7. It supports a management software in Windows Platform, that provide a powerful management function.

8. We are free to choose the RS232/ RS422/ RS485 serial type.

9. It uses a 10/100M adaptive Ethernet port.

10. It embeds 15KV ESD surge protection.

11. The rate of serial communication is up to 460.8kbps

² Connect serial devices to server based applications over an IP network

² Manage remote serial console ports over an IP network

² Virtual modem capability for modem-based applications

10/100Mbps rate

full/ duplex auto-negotiation
Protocol: Support IEEE 802.3
RJ45 connector

Magnetic Isolation Protection: 1.5 KV built-in

Software and hardware flow control

Terminal Block (3 pins per port)

TX and RX activity indicators

l Data Bits: 5, 6; 7; 8

l Stop Bits: 1, 2

l Parity: None; Even; Odd; Space; Mark

l Baudrate: 110 bps to 460.8 Kbps

RS-232: TxD; RxD; GND

RS-422: Tx+; Tx-; Rx+; Rx-; GND

RS-485-2w: Data+; Data-; GND

l Network Protocols: ICMP, IP, TCP, UDP, HTTP, ARP.

l Configuration Options: Built-in WEB server.

l Windows Virtual COM Drivers: Windows 2000/ XP/ 2003/ Vista/ 2008/7

Dimensions:

183 x 88 x 30mm

Operating Temperature: 0 to 50¡ãC

Storage Temperature: -40 to 85¡ãC

Ambient Relative Humidity: 5 to 95% (non-condensing)

Input Voltage:

5 VDC; -48VDC; 110VAC and 220VAC (See Ordering Information)

Power Consumption: (5 watts