低温，安全耐用
低功耗，环保
特殊光电控制，三步电流应用
长寿命，500,000次操作
MOV提供反向电流保护
优质强度铝合金，实心不锈钢螺栓
门雕信号输出触点（NCCOM）
负载电流的双重保护
如果在5秒内没有动作，则自动重新锁定
证书：CE和MA
光电控制，低温
A：低电流立即更改
B：当门框与门扇不重合时，门扇抵住螺栓，电动螺栓将启动低功率功能，使低温
C：光电控制技术，防止机械缺陷
*故障安全：通电时锁定
*面板：205Lx35WX41Hmm
*打击：90Lx25Wx2Hmm
*螺栓：直径16mm，不锈钢16mm抛光
*电压：12V DC
*启动电流：900mA
*待机电流：110mA
*实心螺栓：抛光外壳，800kg保持力
*适用于：木门，玻璃门，金属门，玻璃门
*信号输出：门状态输出，NC / COM
*表面温度：低温
*感应距离：8mm
*工作温度：-10至+ 55℃（14-131°F）
*工作湿度：0-90％（非冷凝）
*特殊设计：测试到500,000次循环
*表面材质：高铝，搪瓷线完成
*重量：0.7kg

Low temperature, safe and durable
Low power, environmental protection
Special photoelectricity control, three steps current application
Long lifespan with 500,000 operations
MOV provides reverse current protection
Superior strength aluminum alloy, solid stainless steel bolt
Door statue signal output contact (NCCOM)
Double protection for loading current
Auto-relock if no action within 5secs
Certificate: CE and MA
Photoelectricity control, low temperature
A:The low current is changed immediately
B:When door frame doesn't coincide with door leaf, door leaf against the bolt, then the electric bolt will start the low-power function to bring low temperature
C:The photoelectricity control technology, prevent the mechanical defect
* Fail safe: locked when energized
* Face plate: 205Lx35WX41Hmm
* Strike: 90Lx25Wx2Hmm
* Bolt: 16mm diameter, stainless steel 16mm throw
* Voltage: 12V DC
* Start current: 900mA
* Standby current: 110mA
* Solid bolt: polishing housing, 800kg holding force
* Suitable for: wooden door, glass door, metal door, glass door
* Signal output: door status output, NC/COM
* Surface temperature: low temperature
* Induction distance: 8mm
* Operating temperature: -10 to +55℃ (14-131°F)
* Operating humidity: 0-90% (non-condensing)
* Special designed: tested to 500,000 cycles
* Face place material: high aluminum, carrulous line finished
* Weight: 0.7kg