API quality tricone bits

API quality tricone bits

API quality tricone bits

500-800 USD

加入意向

快速详细信息

  • 原产地：河北，中国（大陆）
  • 品牌名称：江钻股份
  • 型号：所有IADC码
  • 类型：钻头
  • 机器类型：钻井设备
  • 认证：API
  • 材质：硬质合金
  • 处理类型：锻造
  • 使用：钻井
  • 轴承类型：弹性体密封的滑动轴承
  • 钻孔形成：中等至硬地层
  • 付款方式：T / T＆L / C
  • 颜色：各种
  • 品牌：江钻股份; CS; 丽琳; Fistbit; 史密斯等
  • 大小：2 7/8“〜26

包装及送货

包装细节： 木盒子; 钢箱梁; 或作为您的要求
交货详细信息： 在7-15个工作日内

技术指标

1.认证的API-ISO
2.质量好，价格低
售后服务3.良好
4.充足的库存，交货期快

API质量牙轮钻头

1）切削结构

齿的耐磨性增强了牙齿表面为钢齿位上溢价碳化钨耐磨堆焊。

2）仪表结构

多计与保护上的圆锥，钨硬质合金刀片和堆焊在下摆增加的规表面脚跟和压力表刀片计剪衡量保持能力和轴承寿命。

3）轴承结构

高精度滚子轴承与两个推力面孔。 球锁定锥。 推力面临硬面用耐磨合金。 耐磨性和轴承的耐发热胶着性提高。

4）密封与润滑

溢价的O形环，密封最优压缩和弯曲的密封结构能增强密封性能。 压力补偿系统和先进的油脂能大大提高润滑可靠性。

5）产品应用

它适用于各种队形，并在实现低转速高到中WOB应用

河间市拳石油设备有限公司

模型

TCI位，钢齿钻头

IADC码

116 117 12 6127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111 121 131 346 347

417 427 437 517 527 537 617 627 637 737 837 832 415 425 435 445 525 625 635 416 427 436 446 447 516 526 537 547 516 536 535

现有尺寸：

从2 7/8至26'

对于孔揭幕战位大尺寸，铰刀位

优点

最优惠的价格和最好的qualtity

轴承类型：

密封轴承和非密封轴承

HJ（金属密封的滑动轴承）

HA（橡胶密封轴颈轴承

风冷轴承类型

形成或层

软.medium软; 硬; 中硬; 很难形成

按钮的大小（额外的功能）

键位，锯齿

1）Y型锥形齿2）的X凿牙

3）K-宽齿

4）G- Gague保护

材料

合金结构钢，硬质合金

填料

木箱或精钢表壳

付款条件

T / T; 的L ​​/ C; 西联汇款

交货条件

通过海运或空运

交货时间

在3至7天

市场

加拿大; 美国; 中东 ; 非洲; 欧洲; Austrilia

应用

石油和天然气; 水井 ; 采矿和构造的行业; 油田; 施工; 地热; 水平定向钻; 和地下基础工作

一些IADC代码，以供参考：

437
软地层TCI牙轮钻头
在427 TCI位用于钻低抗压强度，非常软地层。 TCI位尽量采用大直径和高值预测bothconical和凿子钨硬质合金刀片。 这种切割S结构设计，结合最大锥偏移，导致高比特渗透率。 的刀行深压弯防止想逃位在粘地层。
517
中型组TCI牙轮钻头
该517features进取凿子钨脚跟行和内部行硬质合金刀片。 这德兴提供了一种快速钻井速度并增加切割结构耐久性中等至中硬地层。 在HSN的橡胶O形圈提供足够的密封轴承的耐用性。
637
硬地层TCI牙轮钻头
该637bits可以用于钻硬和磨料地层。 耐磨的碳化钨刀片被用于所述外围行，以防止位计的损失。 bemisphericalshaped刀片最大的数字被用在所有行提供刀具的耐用性和寿命长。
617
中等硬地层TCI牙轮钻头
所述617features健壮凿钨上的后排和圆锥形的内部行硬质合金刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形圈，他617features上的后排和圆锥形的内部行健壮凿碳化钨刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环E 617features上的后排和圆锥形的内部行健壮凿碳化钨刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环617features健壮凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环617features健壮凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环17features健壮凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环7features健壮凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形圈的功能在后排和圆锥形的内部行健壮凿碳化钨刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环功能强大的凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环atures健壮凿碳化钨插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环Tures的脚跟行和圆锥形的内部行健壮凿碳化钨刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环数目字健壮凿碳化钨插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环清晰度健壮凿碳化钨插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环ES健壮凿碳化钨插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环小号健壮凿碳化钨插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环健壮凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环健壮凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环obust凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环胸围凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环乌斯凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环ST凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环吨凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环凿钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环希塞尔钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环伊瑟尔钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环sel的钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环埃尔钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环升钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环钨硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环ungsten硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环ngsten硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环gsten硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环斯登硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环10的硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环烯硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形圈ň硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环硬质合金刀片上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环arbide插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环rbide插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环待机上的后排和圆锥形的内部行插入。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环的ide插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环德插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环E插入的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环插入脚跟行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环nserts上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环serts上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环ERTS上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环RTS上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环TS上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环S上的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 上的后排和圆锥形的内部行的HSN橡胶O形环。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 上的后排和圆锥形的内部行的HSN橡胶O形环。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环n中的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环的后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈，他后排和锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环E后排和锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环后排和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环鳗鱼行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环埃尔行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环升行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环行和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈流和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环瓦特和圆锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环和锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环和锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈第二圆锥形上的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在内部各行中的HSN橡胶O形环D圆锥形。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈的锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈的锥形的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈onical上的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈nical上的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈的iCal上的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈CAL上的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈人在内行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈l在内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在内部各行中的HSN橡胶O形环。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在内部各行中的HSN橡胶O形环。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈n中的内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN橡胶O形圈内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN橡胶O形圈内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈，他内心行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环E内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈内部行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈nner行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈仪行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环儿行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈r行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈的行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈的行。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈OWS。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈WS。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈秒。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环这样的设计提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形圈他的设计提供了一种快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形圈是设计提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形环的设计提供了一种快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形环设计提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形环设计提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形环ESIGN提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 在HSN的橡胶O形圈的标志提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环IGN提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形环GN提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 在HSN的橡胶O形圈ñ提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形环提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 的HSN橡胶O形环提供了一个快速钻孔速率和加入sutti8ng结构耐久性在介质中硬地层。 在HSN橡胶O形圈rovides快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN橡胶O形圈ovides快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环国际志愿组织快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN橡胶O形圈的IDE快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环德快速钻速和中等至中等硬地层补充sutti8ng结构耐久性。 在HSN橡胶O形圈上课了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈SA快钻速，并在中添加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O形环快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环快速钻速，并在中添加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O形环快速钻速，并在中添加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O型圈AST钻速，并在中添加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O型圈ST钻速，并在中添加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O型圈牛逼钻速，并在中添加sutti8ng结构耐久性至中硬地层。 的HSN橡胶O形环钻速和在介质中加入sutti8ng结构耐用性，以中硬地层。 的HSN橡胶O形环钻速和在介质中加入sutti8ng结构耐用性，以中硬地层。 在HSN的橡胶O型圈RILLING率和中加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O型圈解毒，阿莫西林率和增加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈灌装速率和在中加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O型圈玲率和中加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O形环荷兰国际集团率和增加sutti8ng结构耐久性中等至中等硬地层。 在HSN橡胶O形圈不良率，并在中添加sutti8ng结构耐久性至中硬地层。 的HSN橡胶O形圈克率和在介质中加入sutti8ng结构耐用性，以中硬地层。 的HSN橡胶O形环率和在介质中加入sutti8ng结构耐用性，以中硬地层。 的HSN橡胶O形环率和在介质中加入sutti8ng结构耐用性，以中硬地层。 在HSN的橡胶O型圈吃了在中添加sutti8ng结构耐久性至中硬地层。 在HSN的橡胶O型圈TE和补充sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O型圈e和在中等至中硬地层补充sutti8ng结构耐久性。 在HSN的橡胶O型圈和中等至中等硬地层补充sutti8ng结构耐久性。 在HSN的橡胶O型圈和中等至中等硬地层补充sutti8ng结构耐久性。 在HSN的橡胶O型圈次加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形环D补充sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈加sutti8ng结构耐久性中等至中等硬地层。 在HSN的橡胶O形圈加sutti8ng结构耐久性中等至中等硬地层。 在中等至中硬地层的HSN的橡胶O型圈dded sutti8ng结构耐久性。 在介质中的HSN的橡胶O型圈DED sutti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈版sutti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O形环D sutti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈sutti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈sutti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈utti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈tti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈ti8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈i8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈8ng结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈NG结构耐久性至中硬地层。 在介质中的HSN的橡胶O形环G结构耐久性至中硬地层。 在介质中的HSN的橡胶O形环结构耐久性至中硬地层。 在介质中的HSN的橡胶O形环结构耐久性至中硬地层。 在介质中的HSN的橡胶O型圈tructure耐久性至中硬地层。 在介质中的HSN的橡胶O型圈ructure耐久性至中硬地层。 在介质中的HSN的橡胶O型圈ucture耐久性至中硬地层。 在介质中的HSN的橡胶O型圈cture耐久性至中硬地层。 在介质中的HSN的橡胶O型圈TURE耐久性至中硬地层。 在介质中的HSN的橡胶O型圈URE耐久性至中硬地层。 在HSN的橡胶O形圈重新耐久性中等至中等硬地层。 在介质中的HSN的橡胶O形环E耐久性中硬地层。 在介质中的HSN的橡胶O型圈耐久性至中硬地层。 在介质中的HSN的橡胶O型圈耐久性至中硬地层。 在HSN的橡胶O型圈urability在中等至中硬地层。 在HSN的橡胶O型圈rability在中等至中硬地层。 在介质中的HSN的橡胶O型圈的能力，中硬地层。 在HSN的橡胶O形圈相容性在中等至中硬地层。 在HSN的橡胶O型圈ility在中等至中硬地层。 在HSN的橡胶O型圈lity在中等至中硬地层。 在HSN的橡胶O型圈性在中等至中硬地层。 在HSN的橡胶O型圈TY在中等至中硬地层。 在HSN橡胶O型圈Y在中等至中硬地层。 在HSN的橡胶O型圈在中等至中硬地层。 在HSN的橡胶O型圈在中等至中硬地层。 在HSN的橡胶O型圈ñ中等至中等硬地层。 在HSN的橡胶O型圈中至中硬地层。 在HSN的橡胶O型圈中至中硬地层。 在HSN的橡胶O型圈edium到中硬地层。 在HSN的橡胶O型圈dium到中硬地层。 在HSN的橡胶O形环鎓到中硬地层。 在HSN的橡胶O型圈微米至中硬地层。 在HSN的橡胶O型圈米至中硬地层。 在HSN的橡胶O型圈中硬地层。 在HSN的橡胶O型圈中硬地层。 在HSN橡胶O型圈O中硬地层。 在HSN的橡胶O型圈中硬地层。 在HSN的橡胶O型圈中硬地层。 在HSN的橡胶O型圈edium硬地层。 在HSN的橡胶O型圈dium硬地层。 在HSN的橡胶O型圈IUM硬地层。 在HSN的橡胶O型圈微米硬地层。 在HSN的橡胶O形环，M是硬性的形成。 在HSN的橡胶O形圈硬地层。 在HSN的橡胶O形圈硬地层。 在HSN的橡胶O形圈ARD编队。 在HSN的橡胶O形圈次编队。 在HSN的橡胶O形环D编队。 在HSN的橡胶O形圈的形成。 在HSN的橡胶O形圈的形成。 在HSN的橡胶O形圈ormations。 在HSN的橡胶O形圈rmations。 在HSN的橡胶O形圈mations。 在HSN的橡胶O形圈ations。 在HSN的橡胶O型圈系统蒸发散。 在HSN的橡胶O形环离子。

Steel tooth bits series
114-117
Soft Formation Tooth Bits
The 114-117 bits are used to drill low compressive strength, soft formations . Long projection tooth lengths are used on high offset cones to provide thegreatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. Onthe softest bit ty0pes this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127bits are used to drill high-compressive strength, medium hard formations . Short projection teeth with reduced crest length are used in this series of bit designs . Durable hard facing is applied to reduce tooth wear

这是我的荣幸为您服务，我们将不胜感激，如果你能给我们更多的好建议！

Quick Details

  • Place of Origin: Hebei, China (Mainland)
  • Brand Name: Kingdream
  • Model Number: All IADC code
  • Type: Drill Bit
  • Machine Type: Drilling Equipment
  • Certification: API
  • Material: Carbide
  • Processing Type: Forging
  • Use: Well Drilling
  • Bearing type: Elastomer sealed slide bearing
  • Drilling Formation: Medium to hard formation
  • Payment Term: T/ T&L/ C
  • Color: various
  • Brand: Kingdream; CS; Lilin; Fistbit; Smith and so on
  • Size: 2 7/8'~26

Packaging & Delivery

Packaging Details: wooden box; steel box; or as your requirements
Delivery Detail: within 7-15 work days

Specifications

1. certified by API-ISO
2. good quality, low price
3. good after-sales service
4. adequate stocks, fast delivery

API quality tricone bits

1) Cutting Structure

The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.

2) Gauge Structure

Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

3) Bearing Structure

High precision roller bearing with two thrust faces. Ball lock the cone. Thrust faces hardface with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.

4) Seal and Lubrication

Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.

5) Product Application

It is suitable for various formations, and achieves high RPM under low to medium WOB application

Hejian Fist Petroleum Equipment Co., Ltd

Model

TCI BIT, STEEL TOOTH BIT

IADC CODE

116 117 12 6127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111 121 131 346 347

417 427 437 517 527 537 617 627 637 737 837 832 415 425 435 445 525 625 635 416 427 436 446 447 516 526 537 547 516 536 535

available sizes:

From 2 7/8 to 26'

larger sizes for hole opener bit , reamer bit

advantage

most favourable price and best qualtity

bearing type:

sealed bearing and non-sealed bearing

HJ (metal sealed journal bearing)

HA (rubber sealed journal bearing

aircooled bearing type

Formation or layer

soft .medium soft ; hard; medium hard; very hard formation

Button size (extra features)

Button bit, saw teeth

1) Y-Conical teeth 2) X-chisel teeth

3) K- wide teeth

4) G- Gague protection

Material

Alloy steel , carbide

Packing

Wooden case or steel case

Payment terms

T/ T; L/ C; Western union

Delivery terms

By sea or by air

Delivery time

Within 3 to 7 days

Market

Canada; USA; Middle east ; Africa; Europe; Austrilia

Application

petroleum&gas ; water well ; mining and tectonic industries ; oil field; construction; geothermal; directional boring; and underground foundation work

some IADC code for reference:

437
Soft Formation TCI Tricone Bits
The 427 tci bits are used to drill low compressive strength, very soft formations . TCI bits maximize the use of bothconical and chisel tungsten carbide inserts of large diameters and high projection. This cutting sstructure design, combined with maximum cone offset, results in high bit penetration rates . The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone bits
The 517features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This desing provides a fast drilling rate and added cutting structure durability in medium-to medium hard formations . The HSN rubber o-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637bits can be used to drill hard and abrasive formations . Wearresistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of bemisphericalshaped inserts are used in all rows to provide cutter durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring he 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring e 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring 17features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring 7features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring eatures robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring atures robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring tures robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ures robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring res robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring es robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring s robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring obust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring bust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring st chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring t chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring hisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring isel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring sel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring el tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring l tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ngsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring gsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring sten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring en carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring n carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring arbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring bide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring de inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring e inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring nserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring serts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring erts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring s on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring n the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring he heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring e heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring eel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring el row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring l row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ow and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring w and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring nd conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring d conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring onical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring nical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring cal on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring al on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring l on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring n the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring he inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring e inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring nner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring er rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring r rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ws. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring s. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring . This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring his design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring is design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring s design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring esign provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring sign provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ign provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring gn provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring n provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rovides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ovides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring vides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring des a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring es a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring s a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring st drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring t drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring illing rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring lling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ing rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ng rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring g rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring te and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring e and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring nd added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring d added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring dded sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ded sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ed sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring d sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring utti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring tti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring i8ng structure durability in medium to medium hard formations . The HSN rubber o-ring 8ng structure durability in medium to medium hard formations . The HSN rubber o-ring ng structure durability in medium to medium hard formations . The HSN rubber o-ring g structure durability in medium to medium hard formations . The HSN rubber o-ring structure durability in medium to medium hard formations . The HSN rubber o-ring structure durability in medium to medium hard formations . The HSN rubber o-ring tructure durability in medium to medium hard formations . The HSN rubber o-ring ructure durability in medium to medium hard formations . The HSN rubber o-ring ucture durability in medium to medium hard formations . The HSN rubber o-ring cture durability in medium to medium hard formations . The HSN rubber o-ring ture durability in medium to medium hard formations . The HSN rubber o-ring ure durability in medium to medium hard formations . The HSN rubber o-ring re durability in medium to medium hard formations . The HSN rubber o-ring e durability in medium to medium hard formations . The HSN rubber o-ring durability in medium to medium hard formations . The HSN rubber o-ring durability in medium to medium hard formations . The HSN rubber o-ring urability in medium to medium hard formations . The HSN rubber o-ring rability in medium to medium hard formations . The HSN rubber o-ring ability in medium to medium hard formations . The HSN rubber o-ring bility in medium to medium hard formations . The HSN rubber o-ring ility in medium to medium hard formations . The HSN rubber o-ring lity in medium to medium hard formations . The HSN rubber o-ring ity in medium to medium hard formations . The HSN rubber o-ring ty in medium to medium hard formations . The HSN rubber o-ring y in medium to medium hard formations . The HSN rubber o-ring in medium to medium hard formations . The HSN rubber o-ring in medium to medium hard formations . The HSN rubber o-ring n medium to medium hard formations . The HSN rubber o-ring medium to medium hard formations . The HSN rubber o-ring medium to medium hard formations . The HSN rubber o-ring edium to medium hard formations . The HSN rubber o-ring dium to medium hard formations . The HSN rubber o-ring ium to medium hard formations . The HSN rubber o-ring um to medium hard formations . The HSN rubber o-ring m to medium hard formations . The HSN rubber o-ring to medium hard formations . The HSN rubber o-ring to medium hard formations . The HSN rubber o-ring o medium hard formations . The HSN rubber o-ring medium hard formations . The HSN rubber o-ring medium hard formations . The HSN rubber o-ring edium hard formations . The HSN rubber o-ring dium hard formations . The HSN rubber o-ring ium hard formations . The HSN rubber o-ring um hard formations . The HSN rubber o-ring m hard formations . The HSN rubber o-ring hard formations . The HSN rubber o-ring hard formations . The HSN rubber o-ring ard formations . The HSN rubber o-ring rd formations . The HSN rubber o-ring d formations . The HSN rubber o-ring formations . The HSN rubber o-ring formations . The HSN rubber o-ring ormations . The HSN rubber o-ring rmations . The HSN rubber o-ring mations . The HSN rubber o-ring ations . The HSN rubber o-ring tions . The HSN rubber o-ring ions . The HSN rubber o-ring ons . The HSN rubber o-ring ns . The HSN rubber o-ring s . The HSN rubber o-ring . The HSN rubber o-ring . The HSN rubber o-ring The HSN rubber o-ring he HSN rubber o-ring e HSN rubber o-ring HSN rubber o-ring HSN rubber o-ring SN rubber o-ring N rubber o-ring rubber o-ring rubber o-ring ubber o-ring bber o-ring ber o-ring er o-ring r o-ring o-ring o-ring -ring ring ing ng g rovodes adequate sea; omg fpr bearomg dirability.

Steel tooth bits series
114-117
Soft Formation Tooth Bits
The 114-117 bits are used to drill low compressive strength, soft formations . Long projection tooth lengths are used on high offset cones to provide thegreatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. Onthe softest bit ty0pes this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127bits are used to drill high-compressive strength, medium hard formations . Short projection teeth with reduced crest length are used in this series of bit designs . Durable hard facing is applied to reduce tooth wear

It's my pleasure to serve for you , we will be grateful if you could give us more good suggestion!!!