7-3\4' Oil well drilling equipment- tricone bit

7-3\4' Oil well drilling equipment- tricone bit

7-3 / 4“石油钻井设备 - 三牙轮钻头

200 USD

加入意向

快速详细信息

  • 原产地：河北，中国（大陆）

  • 品牌名称：FISTBIT

  • 型号：IADC517

  • 类型：麻花钻位

  • 材料：碳化钨

  • 使用：钻井

  • 轴承类型：滑动轴承

  • 付款方式：T / T＆L / C

  • 颜色：各种

  • 处理类型：锻造

包装及送货

包装细节： 木盒子; 钢箱梁; 或作为您的要求
交货详细信息： 在7-15个工作日内

技术指标

1.认证的API-ISO
2.质量好，价格低
售后服务3.良好
4.充足的库存，交货期快
5.517

河间市拳石油设备有限公司我们一直在与生存，互惠互利诚信为本，质量的原则，提供最优质的产品，为我们的客户周到的服务。 我们期待着在不久的将来与您建立关系。

1，原料药质量牙轮钻头

1）切削结构

齿的耐磨性增强了牙齿表面为钢齿位上溢价碳化钨耐磨堆焊。

2）仪表结构

多计与保护上的圆锥，钨硬质合金刀片和堆焊在下摆增加的规表面脚跟和压力表刀片计剪衡量保持能力和轴承寿命。

3）轴承结构

高精度滚子轴承与两个推力面孔。 球锁定锥。 推力面临硬面用耐磨合金。 耐磨性和轴承的耐发热胶着性提高。

4）密封与润滑

溢价的O形环，密封最优压缩和弯曲的密封结构能增强密封性能。 压力补偿系统和先进的油脂能大大提高润滑可靠性。

5）产品应用

它适用于各种队形，并在实现低转速高到中WOB应用

2，规格

位大小

IADC

应用

切削结构

压力

千牛/毫米

速度

转/分

HA517G

517

低抗压强度; 高可钻性的软地层; 如页岩; 粘土; 砂岩; 软石灰石; 等等

大直径的局部顶形式排牙，楔放电牙齿

0.35- 1.05

120- 50

3，有些IADC代码，以供参考：

437
软地层TCI牙轮钻头
在427 TCI位用于钻低抗压强度，非常软地层。 TCI位尽量采用大直径和高值预测bothconical和凿子钨硬质合金刀片。 这种切割S结构设计，结合最大锥偏移，导致高比特渗透率。 的刀行深压弯防止想逃位在粘地层。
517
中型组TCI牙轮钻头
该517features进取凿子钨脚跟行和内部行硬质合金刀片。 这德兴提供了一种快速钻井速度并增加切割结构耐久性中等至中硬地层。 在HSN的橡胶O形圈提供足够的密封轴承的耐用性。
637
硬地层TCI牙轮钻头
该637bits可以用于钻硬和磨料地层。 耐磨的碳化钨刀片被用于所述外围行，以防止位计的损失。 bemisphericalshaped刀片最大的数字被用在所有行提供刀具的耐用性和寿命长。
617
中等硬地层TCI牙轮钻头
所述617features健壮凿钨上的后排和圆锥形的内部行硬质合金刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。 的HSN橡胶O形圈，他617features上的后排和圆锥形的内部行健壮凿碳化钨刀片。 这种设计提供了快速钻井速度并增加sutti8ng结构耐久性中等至中等硬地层。

钢齿位系列
114-117
软地层牙位
的114-117位用于钻低抗压强度，软地层。 长投影牙长度上均采用高偏移锥提供thegreatest普及率可能。 耐磨硬衬面是用于控制齿的磨损。 Onthe最柔软位ty0pes这硬面完全覆盖钻头的牙。
127
中等硬地层牙位
该127bits用于钻高抗压强度，中硬地层。 短投影牙齿降低坝顶长度被用在这一系列的钻头设计。 耐用的硬质面被用于减少牙齿磨损

4，认证：API

5，包装信息

6，付款条款

T / T和L / C是可以接受的。 （后30％预付款签署contranct，然后70％付款后，看到B / L）

7，FAQ（常见问题解答）

1）如何订购产品？

回答：
发送与细节项目描述或型号查询。
如果没有包装的需求，我们把它作为海的方式包装。
如果可能的话请附上一个参考图片，以避免任何误解或从我们的网站的任何链接，我们得到一个更好的理解。

2）关于交货时间和运输时间？
回答 ：
领头的时间取决于订单数量。 通常由海，小订单或紧急订单，我们可以通过空气后收到您的同意给你发货。
据从中国到你的端口的距离，通常从中国到欧洲的25天左右。 西美国20天。

3），我可以期待一个优质的产品？
回答 ：
是。 我们所有的活动都通过了ISO 9001：2008和API，无论是在产品和服务，同时，成熟的生产工艺，确保质量符合国际要求。

8，请在您的查询中添加这些信息

1，位大小

2，位IADC码

3，层信息

4，位数量

9; 这是我的荣幸为您服务; 我们会很感激，如果你能给我们更多的好建议！

Quick Details

  • Place of Origin: Hebei, China (Mainland)

  • Brand Name: FISTBIT

  • Model Number: IADC517

  • Type: Twist Drill Bit

  • Material: Tungsten Carbide

  • Use: Well Drilling

  • Bearing Type: sliding bearing

  • Payment Term: T/ T&L/ C

  • Color: various

  • Processing type: Forging

Packaging & Delivery

Packaging Details: wooden box; steel box; or as your requirements
Delivery Detail: within 7-15 work days

Specifications

1. certified by API-ISO
2. good quality, low price
3. good after-sales service
4. adequate stocks, fast delivery
5.517

Hejian Fist Petroleum Equipment Co., Ltd we have been in line with the principle of faith-based, quality of survival and mutual benefit, provides the highest quality products and attentive service for our customers'. We are looking forward to establishing relationships with you in the near future.

1, API quality tricone bits

1) Cutting Structure

The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth surfaces for steel tooth bit.

2) Gauge Structure

Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

3) Bearing Structure

High precision roller bearing with two thrust faces. Ball lock the cone. Thrust faces hardface with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.

4) Seal and Lubrication

Premium O-ring, Optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability.

5) Product Application

It is suitable for various formations, and achieves high RPM under low to medium WOB application

2, Specification

Bit size

IADC

Application

Cutting structure

pressure

kN/ mm

speed

r/ min

HA517G

517

Low compressive strength; high drillability of soft formation; such as shale; clay; sandstone; soft limestone; etc

Large diameter of partial top form in row tooth, wedge discharge teeth

0.35- 1.05

120- 50

3, Some IADC code for reference:

437
Soft Formation TCI Tricone Bits
The 427 tci bits are used to drill low compressive strength, very soft formations . TCI bits maximize the use of bothconical and chisel tungsten carbide inserts of large diameters and high projection. This cutting sstructure design, combined with maximum cone offset, results in high bit penetration rates . The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone bits
The 517features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This desing provides a fast drilling rate and added cutting structure durability in medium-to medium hard formations . The HSN rubber o-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637bits can be used to drill hard and abrasive formations . Wearresistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of bemisphericalshaped inserts are used in all rows to provide cutter durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations . The HSN rubber o-ring he 617features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added sutti8ng structure durability in medium to medium hard formations.

Steel tooth bits series
114-117
Soft Formation Tooth Bits
The 114-117 bits are used to drill low compressive strength, soft formations . Long projection tooth lengths are used on high offset cones to provide thegreatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. Onthe softest bit ty0pes this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127bits are used to drill high-compressive strength, medium hard formations . Short projection teeth with reduced crest length are used in this series of bit designs . Durable hard facing is applied to reduce tooth wear

4, Certification: API

5, Packing Information

6, Payment Terms

T/ T and L/ C are acceptable. (30% advanced payment after sign the contranct , then 70% payment after see the B/ L)

7, FAQ (Frequently Asked Questions)

1) ,How to order the products?

Answer:
Send the inquiry with detail item description or with Model number.
If there is no packing demand we take it as sea-way packing.
If possible please attach one reference picture to avoid any misunderstanding or any links from our website for we get a better understanding.

2) ,About lead time and shipping time?
Answer :
The lead time depend on quantity of order. Usually shipped by sea, small order or urgent order we can send you by air after received your agreement.
According the distance from china to your port, usually from China to European about 25 days. To West of American 20 days.

3) ,Can I expect a quality products?
Answer :
Yes. All our activities are accredited to ISO 9001: 2008 and API, both in products and services, at the same time, mature production technology ensuring the quality satisfy international request.

8, Pls add these informations in you inquiry

1, bits size

2, bits IADC CODE

3, layer information

4, bits quantity

9; It's my pleasure to serve for you ; we will be grateful if you could give us more good suggestion!!!