Drill Rods
钻杆
快速详细信息
- 厚度：0.2 - 10毫米
- 截面形状：作为您的订单
- 原产地：河北，中国（大陆）
- 二次加：非辅助
- 应用：钻杆
- 技术：热轧
- 认证：API
- 表面处理：镀锌
- 专用管：API管
- 合金加：是合金
- 使用：钻井
- 型号：钻杆
- 品牌名称：武汉市江汉
- 材料：钴钢合金
- 类型：钻杆
- 等级：45＃; 15CrMo; Q23510＃-45＃; 铬钼合金; Q195-Q345
- 执行标准：GB 5310-1995; API 5CT; GB; API
包装及送货
| 包装细节： | 木托盘或作为您的要求 |
|---|---|
| 交货详细信息： | 7个工作日内 |
技术指标
钻杆：BQ，NQ，HQ，PQ。1-BQ; NQ; 总部; PQ磁芯桶
2，交货日期：只需7天
3，交货期限：通过空运或海运
河间市拳石油设备有限公司 我们一直在用的原则诚信为本，质量求生存，互惠互利的质量，提供最优质的产品，为我们的客户周到的服务。 我们期待着在不久的将来与您建立关系
1.目的
用于石油钻井。
2.键入
根据T6194 SY / 96石油套管点短螺纹套管和联轴器和长螺纹套管接头和两个。
3.规格及外观质量
（1）根据国内壳体SY / T6194-96法规，套管长度，其范围不确定英尺8到13米。 但不小于6米套管可以提供，金额不得超过20％。
（2）内外表层套管不得折叠，发纹，覆岩离层注浆，裂纹，轧折和结疤。 这些缺陷应完全删除，清除深度不得超过公称厚度的12.5％。
（3）表面不联轴器有折叠，发纹，覆岩离层注浆，裂纹，轧折，结疤等缺陷。
（4）套管接头和表面应光滑，螺纹，不允许有毛刺，撕裂和足以使螺纹中断影响强度和其他密切相连的缺陷。
4.化学成分检验
（1）按SY / T6194-96法规。 套管接头和它的同钢种。 硫，磷含量（（0.045％，0.045％。
（2）根据84 GB222-采取化学分析的样本的规定。 根据GB223化学分析的有关部分的规定。
（3）美国石油学会（ARISPEC5CT1988 2001：1的规定。根据最新的版本ASTME59化学分析样品制备到，根据最新的版本ASTME350化学分析。
5.物理测试
（1）按SY / T6194-96法规。 是压扁试验（GB246 97）张力试验GB228（87），以及水压试验。
（2）根据美国石油APISPEC5CT1988学会1水压试验版本规定; 压扁试验。 硫化物应力腐蚀开裂试验; 硬度测试（ASTME18或最新的版本规定为E10），拉伸试验，横向冲击试验（ASTMA370，ASTME23和最新版本的标准的相关规定），谷物进行测试（ASTME112最新版本或其它方法）。
6.包装
根据T6194 SY / 96的规定，国内的外壳应该用钢丝或钢带外部。 每个刀片套管接头和所有的线程应该拧保护来保护线程。 链接
模型 | 一切正常大小或可订购 |
类型 | 各种和大小的PDC钻头 |
可适用 | 水井; 油田; 施工; 地热; 水平定向钻; 和地下基础工作 |
形成 | 黏; 柔软的; 中硬; 硬地层 |
进口轴承 | 橡胶密封或金属密封 |
填料 | 木托盘或作为您的要求 |
付款期限 | T / T或L / C即期 |
最小起订量 | 1件 |
供应能力 | 1000件/月 |
交货时间 | 7个工作日内 |
Quick Details
- Thickness: 0.2 - 10 mm
- Section Shape: as your order
- Place of Origin: Hebei, China (Mainland)
- Secondary Or Not: Non-secondary
- Application: Drill Pipe
- Technique: Hot Rolled
- Certification: API
- Surface Treatment: Galvanized
- Special Pipe: API Pipe
- Alloy Or Not: Is Alloy
- Use: Well Drilling
- Model Number: drill rods
- Brand Name: JiangHan
- Material: Cobalt Steel Alloys
- Type: drill pipe
- Grade: 45#; 15CrMo; Q23510#-45#; Cr-Mo alloy; Q195-Q345
- Standard: GB 5310-1995; API 5CT; GB; API
Packaging & Delivery
| Packaging Details: | wooden tray or as your requirements |
|---|---|
| Delivery Detail: | within 7 work days |
Specifications
Drill rod: BQ, NQ, HQ , PQ .1-BQ; NQ; HQ; PQ core barrel
2-Delivery Date: In 7 days
3-Delivery term: By air or by sea
Hejian Fist Petroleum Equipment Co., Ltd. we have been in line with the principle of faith-based, quality of survival and mutual benefit, provides the highest quality products and attentive service for our customers'. We are looking forward to establishing relationships with you in the near future
1. Purpose
Used in oil well drilling.
2. Type
According to T6194 SY / 96 oil casing points short thread casing and couplings and long thread casing couplings and two.
3. The specifications and appearance quality
(1) according to domestic casing SY/ T6194-96 regulations, casing length, its scope uncertain feet 8 to 13 m. But not less than 6 m casing can provide, the amount shall not exceed 20%.
(2) the internal and external surface casing shall not fold, hair grain, overburden bed separation grouting, crack, rolling fold and scarring. These defects shall be completely remove, clear the depth may not exceed 12.5% of the nominal thickness.
(3) the surface not couplings have folded, hair grain, overburden bed separation grouting, crack, rolling fold, scarred and other defects.
(4) the casing couplings and surface should be smooth and thread, does not allow to have the burr, tear and enough to make thread interrupt influence strength and the other is closely connected to the defects.
4. Chemical composition inspection
(1) according to SY/ T6194-96 regulations. Casing couplings and its the same steel grade. Sulphur, phosphorus content ( ( 0.045% 0.045%.
(2) according to the provisions of the 84 GB222-take chemical analysis samples. According to the provisions of the relevant part of GB223 chemical analysis.
(3) American petroleum institute (ARISPEC5CT1988 2001: 1 regulations. According to the latest version ASTME59 chemical analysis sample preparation, according to the latest version ASTME350 chemical analysis.
5. Physical tests
(1) according to SY/ T6194-96 regulations. Be crushed flat test (GB246 97) tension test GB228 (87) , and water pressure test.
(2) according to the American petroleum APISPEC5CT1988 learn to 1 hydrostatic pressure test version provisions; crushed flat test; sulfide stress corrosion cracking test; hardness testing (ASTME18 or the latest version provisions as E10) , tensile test, transverse impact test (ASTMA370, ASTME23 and relevant provisions of the most recent editions of the standards) , grain for testing (ASTME112 the latest version or other methods) .
6. Packaging
According to T6194 SY / 96 regulations, domestic casing should with steel wire or steel belts externally. Each blade casing couplings and a thread of all should screw in protection to protect threads. Link
Model | all normal size or can be ordered |
Type | all kinds and size PDC bits |
Applicable | water well; oil field; construction; geothermal; directional boring; and underground foundation work |
Formation | sticky; soft; medium hard; hard formation |
Bearing | rubber seal or metal seal |
Packing | wooden tray or as your requirements |
Payment Term | T/ T or L/ C at sight |
MOQ | 1 Piece |
Supply Ability | 1000 Pieces/ month |
Delivery Time | within 7 work days |
