阵列式红外半球CCTV 420TVL摄像机
| 包装细节: | 1PS /箱 |
|---|---|
| 交货详细信息: | 15天 |
阵列式红外半球CCTV 420TVL摄像机
型号No.GD-6816P
* 700TVL半球摄像机CCTV
*三分之一SONY CCD
* 0.5LUX照明
*大镜头:CS接口(可选4/6/8/12 / 16mm)以
* DC12V /500毫安
100%最好的质量保证
监护人监控摄像机生产的部件进口 索尼东芝松下TDK UTC 等知名企业。
所有的闭路电视摄像机中使用的电子设备都是全新原装。
严格细致的生产工艺,完备的生产和检测设备,严格按照企业标准生产和检验,这一切都已经生产高品质的闭路电视摄像机,也推动了不到0.3%的维修率。
-
发展阶段:80°Chigh温度老化7天用电负荷,在-20℃下4天以上店面,并做破坏性试验
生产阶段:30℃〜40℃,电力负荷老化24小时
定期抽样测试:每个月1-2 PS各型号将在70℃高温用电负荷老化3天,在20℃下存放2天
长寿测试:主要产品将在老化室连续长期老化。 这些产品将每月进行测试。
型号。 | GD-6816P | GD-6916S |
图像传感器 | 1/4 SHARP CCD | 1/3 SONY CCD |
解析度 | 420TVL | 420TVL |
低照度 | 0LUX红外灯开启) | |
视频输出率 | 1.0VP-p75Ω | |
白平衡 | 汽车 | |
AGC | 汽车 | |
背光补偿 | 汽车 | |
电子快门 | 五十零分之一〜十万分之一二 | |
同步模式 | 内同步 | |
红外距离 | 20M | |
红外灯 | Φ8* 10皮秒 | |
透镜 | 6毫米 | |
工作电压 | DC12V /千毫安 | |
工作温度 | -10℃〜50℃ | |
产品尺寸 | 93毫米(L)x93mm(W)X80mm(H)的 | |
包装尺寸 | 132毫米(L)x130mm(W)x105mm(H)的 | |
产品重量 | 180g | |
包装重量 | 211g | |

在CCTV摄像机设计精巧装置,确保长寿命和清晰图像
A.防雷设备:
独特的隔离式防雷 保护 电路,它可以有效地分离脉冲电压高达5000伏,由特殊的LC滤波电路的补充,它可以有效地隔离和吸收雷电由破坏性脉冲产生高压,并因此大大降低了照相机的雷击破坏率。
B.无闪烁的LED设备
特殊设计的红外灯开关电路实现实现无闪烁的功能,当红外开启/关闭。 消除了闪烁和灯光不稳定的现象,当相机开启/关闭。

C.出色的色彩还原设备
精心设计的电路方案,反复调试程序软件可确保出色的色彩渲染,使得相机无论是在室内还是室外,都可以还原原始色彩的真实场景。
D.高效率恒流驱动器设备
我们的红外产品采用高效红外灯驱动电路。 电路的效率是95%以上,且其误差仅为0.3%。 当电源电压是标准电压的范围之内 - 50%到+ 50%的变化,红外灯驱动电流变化几乎是0.3%,也就是说在电源电压急剧波动不会影响正常的灯的光与 红外灯的寿命。 一般电阻限流驱动器和降压型恒流驱动电路不能做到这一点。
E.低照度设备
采用了索尼新的高灵敏度,低照度HAD CCD芯片,卫相机摄像能力大大在弱光的提高,也大大扩大了使用红外距离,卫相机的光灵敏度比传统摄像机高136%。
F.低红外光的衰减设备。
通过使用大核心,高功率红外LED管,高精度和高效率恒流红外驱动电路,我们的CCTV摄像机的红外光衰减超低。 1年以内,光衰减为3%,和光衰减五年内30%

选择监护人,监护人选择产品,你将受益于:
1.良好的施工质保2年内
2.你的客户满意的质量。
3.你的客户订单持续
4.你可以从你的市场良好的口碑,并获得更多的订单。
5.我们的专业的售前和售后
6.合理的价格。
7,快速交货时间。
贸易术语:
1.付款方式:T / T生产之前只有30%的存款,将前付清70%余款交付(西部联盟欢迎)
2.生产周期为50〜100个:4〜7天
3.样品可以在3天交付
4.航运运价是根据您的要求报价
5.航运港口:深圳,香港
6.折扣是根据订单数量提供
7.最小起订量:1片
| Packaging Details: | 1ps/ ctn |
|---|---|
| Delivery Detail: | 1-5days |
LED Array IR DOME CCTV 420tvl Camera
Model No.GD-6816P
* 700TVL dome camera cctv
*1/3 SONY CCD
* 0.5Lux illumination
* Big Lens: CS interface (optional 4/6/8/12/16mm)
* DC12V/ 500mA
100% BEST Quality ASSURANCE
Guardian CCTV Camera's production components imported from SONY Panasonic TOSHIBA TDK UTC and other famous enterprises.
All the electronics used in the cctv camera are new and original.
Strict and detailed production technology, complete production and testing equipment, in strict accordance with the enterprise standard production and inspection, all this has produced high quality cctv camera, also contributed to less than 0.3% repair rate.
-
Development Stage: 80 °Chigh temperature Aging 7 days with electric load, store at -20°C more than 4 days, and do the destructive test
Production Stage: 30 °C-40 °C with electric load aging 24hour
Regular sampling Test: Every month, 1-2 PS of each model will be at 70 °C high temperature with electric load aging for 3 days, and at 20 °C storage for 2 days
Longevity Test: The main products will be continuous long-term aging in the Aging Room. These products will be test every month.
Model No. | GD-6816P | GD-6916S |
Image Sensor | 1/4 SHARP CCD | 1/3 SONY CCD |
Resolution | 420TVL | 420TVL |
Low Illumination | 0Lux IR ON) | |
Video out Rate | 1.0Vp-p75Ω | |
White Balance | Auto | |
AGC | Auto | |
Backlight Compensation | Auto | |
Electronic Shutter | 1/50~1/100000 Second | |
Synchronization mode | Internal synchronization | |
IR Distance | 20M | |
IR Led | Φ8*10 ps | |
Lens | 6mm | |
Operating Voltage | DC12V/ 1000mA | |
Operating Temperature | -10°C~50°C | |
Product Size | 93mm (L) x93mm (W) X80mm (H) | |
Package Size | 132mm (L) x130mm (W) x105mm (H) | |
Product Weight | 180g | |
Package Weight | 211g | |

Smart design device in the CCTV camera to ensure the Long life and Clear image
A. Lightning protection Device:
Unique isolation type lightning protection circuit, which can be effectively separated as much as 5000 volts of pulse voltage, supplemented by special LC filter circuit, it can isolate effectively and absorb lightning high pressure produced by the destructive impulse and, thus greatly reduces the lightning damage rate of the camera.
B. Flicker-free LED Device
Special designed IR LED switch circuit implementation realizes flicker-free function when IR on/ off. Eliminates the Flicker and lights unstable phenomenon when CAMERA on/ off .

C. Excellent color reproduction Device
Carefully designed circuit scheme and repeatedly debugging program software ensures excellent color rendering, making the camera whether indoors or outdoors, can be realistic scenery of reduction of the original color.
D. High Efficiency Constant Current Driver Device
Our infrared products adopt efficient infrared lamp driver circuit. The efficiency of the circuit is more than 95%, and its error is only 0.3%. When the power supply voltage is within the scope of the standard voltage of - 50% to +50% change, infrared lamp drive current change is nearly 0.3%, that is to say sharp fluctuations in supply voltage does not affect the normal lamp light and infrared lamp life. A general resistance limit flow driver and step-down type constant current drive circuit can not do it.
E. Low Illumination Device
Using SONY new high sensitivity, low illumination HAD CCD chip, Guardian camera image pickup ability is greatly improved in weak light, also greatly expanded the use of infrared distance, the light sensitivity of the Guardian camera is 136% higher than traditional cameras.
F. Low infrared light attenuation Device.
By using of the great core, high-power infrared LED tube and high precision & high efficiency constant current infrared driver circuit, our CCTV camera's infrared light attenuation is ultra-low. Within 1 year, the Light attenuation is 3%, and the light attenuation is 30% within five years

Choose Guardian, Choose Guardian product, you will benefit from:
1. The good construction warranty 2 years
2. Your client satisfied on the quality.
3. Your client continued orders
4. Your can get good reputation from your market and obtain more orders.
5. Our professional service before and after sale
6. The reasonable price.
7. Quick Delivery time.
Trade Terms:
1. Payment: T/ T only 30% deposits before production, 70%balance to be paid before deliver (Western Union are welcomed)
2. Production Lead Time for 50~100pcs: 4~7days
3. Sample can be delivered in 3days
4. Shipping freight is quoted under your request
5. Shipping port: Shenzhen, Hong Kong
6. Discounts are offered based on order quantities
7. MOQ: 1Piece