Profession CCTV 650TVL Effio 8-20mm Lens 90 Leds OSD Car plate number capture IR Camera

Profession CCTV 650TVL Effio 8-20mm Lens 90 Leds OSD Car plate number capture IR Camera

职业央视650TVL Effio 8-20mm镜头90的LED的OSD汽车车牌号码捕获红外摄像机

270 USD

加入意向

项目细节

技术:
红外线
类型:
录影机
品牌:
全新的
传感器品牌:
索尼
传感器:
CCD
样式:
枪机
型号:
WI-JKDL01

产品描述

索尼CCD Effio,650电视线,豪华全铝合金氧化,车牌抓拍,强光抑制,8-20mm的镜头,30M的距离,彩色照片拍摄在晚上,5种模式选择(手动),90 LED,独特的双玻璃设计 在前面,thunderproof设计,眩光抑制功能。

介绍:


相机采用1/3 SONY CCD传感器和DSP(数字信号处理)技术,具有高分辨率和高灵敏度; 辅助灯光和眩光抑制(晕收缩)的强度可以通过按键控制来控制。 辅助光的强度是连续可调; 五种模式可供选择,方便用于测试和设置。 使用特殊辅助照明灯,可在夜间拍摄LISENCE板照相机的清晰彩色图像。
它适用于收费站,卡口,入口和停车场的出口,交通灯等监测点,可有效捕捉过往的车辆和车辆行驶在道路和车辆识别车牌的车牌。


规范:


模型

JK-DL09H

图像传感器设备

1 / 3'SONY HAD CCD

有效像素

792(H)* 582(V)

信号系统

朋友

水平分辨率

650电视线(彩色)

最低照度

0.01LUX为F1.2(彩色)

S / N比

大于48dB

电子快门

1 / 50-1 / 10000 /秒

电子快门控制

开/关切换

背光补偿

开/关切换

自动增益控制

开/关切换

颜色

颜色(如照明(1勒克斯,自动辅助电源)

辅灯有效距离

1米〜30米

自动光圈驱动

F = 8-20mm自动光圈亿高分辨率镜头

视频输出

1.0VP - 对,75

电源

DC 12V

工作温度

-10°c-+50°c

尺寸

15.6英寸



安装:

同轴线。

  • 连接到DC12V供电,如果上外壳打开时,指示灯亮。 (D4)。
  • 当图像出现在显示器上,调整焦距和光圈以获得清晰的图像。
  • 覆盖上部壳体,锁背面螺钉。
  • 固定支架的螺纹轴孔与孔在照相机的底部。



故障排除:


如果在相机的任何问题,请尝试解决这个问题如下,如果没有,请联系我们。

麻烦

没有视频输出

检查电源和电源线,视频线,检查自动光圈是合适的。

图像较暗

检查强光抑制的工作方式和强度

图像是模糊的 检查镜头表面和焦点,如果人们都很好地集中。
图像发白

调整DC电平驱动器输出电平

图像闪烁

调整DC电平驱动输出


注意:

请使用在清洁,干燥,灰尘少的环境,以延长使用寿命。
不要在环境温度下使用)50
°c , 小心轻放。

摄像机控制和设置

这台相机是工作在五种不同的模式,通过按键向上/向下选择不同的工作模式。 或者通过RS485。 (不是标准配置)

  • 五种模式可供选择:
    模式1)120公里/小时
    模式2)80公里/小时
    模式3)40 /小时
    模式4)标准模式
    方式5)眩光抑制模式
  • 防雷击设计



项目包括:

  • 1个专用道都在同一个摄像头
  • 1个支架

包装详细信息

单位类型:
包装重量:
1.800千克
包装尺寸:
40厘米×15厘米x13厘米

Item specifics

Technology:
Infrared
Type:
Video Camera
Brand Name:
Brand new
Sensor Brand:
Sony
Sensor:
CCD
Style:
Box Camera
Model Number:
WI-JKDL01

Product Description

Sony CCD Effio, 650 TVL, Deluxe full aluminum alloy oxidation, car plate capture, strong light inhibition, 8-20mm lens, 30m distance, color photo taking in the evening, 5 modes choices (manual) , 90 LED, unique double glass design at the front, thunderproof design, Glare inhibition function.

Introduction:


The camera adopts 1 / 3 SONY CCD sensor and DSP (digital signal processing) technology, with high-resolution and high sensitivity; The intensity of auxiliary lights and glare inhibition (Halo shrinkage) can be controlled by the key control. The intensity of auxiliary light is continuously adjustable; Five modes for choice, easy for testing and setting. Use special auxiliary lights, can capture clear and color image of lisence plate camera at night.
It applies to toll station, mount, entrances and exits of parking, traffic lights, and other monitoring sites, which can effectively capture license plates of passing cars and license plates of vehicles traveling on the road and vehicle identification.


Specification:


Model

JK-DL09H

Image Sensor Device

1/3'SONY HAD CCD

Effective Pixels

792 (H) *582 (V)

System of Signal

PAL

Horizontal Resolution

650 TV Line (color )

Minimum Illumination

0.01lux at F1.2 (color)

S/ N ration

More than 48dB

Electronic shutter

1/50-1/10000/ sec

Electronic shutter control

On/ Off Switchable

Backlight Compensation

On/ Off Switchable

Auto gain control

On/ Off Switchable

Color

color (if illumination (1 Lux, auxiliary power on automatically)

auxiliary lights available distance

1m~30m

Automatic Iris drive

f=8-20mm auto IRIS million hi-resolution lens

Video output

1.0Vp-p, 75

Power supply

DC 12V

Operating temperature

-10°c-+50°c

Dimension

15.6 inch



Installation:

coaxial line.

  • Connect to DC12V power supply, if the upper casing is open, the indicator light is on. (D4) .
  • When the image appears in the monitor, adjust the focus and Iris to get clear image.
  • Cover the upper casing, lock the back screw.
  • Fix the screw arbor of bracket well with holes at the bottom of camera.



Troubleshooting:


If there is any problem in the camera, please try to solve it as below, if not, contact us.

Trouble

Solution

No video output

Check the power supply and power wire, video wire, check if the auto Iris is suitable.

Image is dark

Check the working mode and intensity of glare inhibition

Image is obscure Check the lens surface and focus if it is well focusing well.
Image whitish

Adjust DC-LEVEL drive output level

Image flashing

Adjust DC-LEVEL drive output


Notice:

Please use it in clean, dry, little dust environment to lengthen lifespan.
Don't use it in environment that temperature ) 50
°c, handle with care.

Camera control and setting

This camera is working at five different modes, select different working mode by key UP/ DOWN. Or through RS485. (not standard equipment)

  • Five modes for choosing:
    Mode 1) 120km/ hour
    Mode 2) 80 km/ hour
    Mode 3) 40 km/ hour
    Mode 4) Standard mode
    Mode 5) Glare inhibition mode
  • thunder-proof design



Item Include:

  • 1 x Road dedicated all in one camera
  • 1 x Bracket

Packaging Details

Unit Type:
piece
Package Weight:
1.800kg
Package Size:
40cm x 15cm x 13cm