1.多语言：英语/中文/西班牙语/意大利语/法语/德语/俄语，超过8种语言可选
2. 7英寸液晶屏显示，800 * 600像素分辨率
3. HD SDI数码相机图像显示和视频输出（可选），支持分辨率1080P 25,30,50,60Hz和720P 25,30,50,60Hz
4. VGA和HDMI信号输入显示，方便DVR / NVR设置
5.摄像机的DC 12V / 2A电源输出
6. USB 5V / 2A电源输出，作为电源
7. LED灯易于在夜间操作
8. microSD卡可移动
9.用户定义的快捷键F1和F2
10LCD屏幕亮度/对比度/色彩饱和度可调
11A自适应并显示NTSC / PA的视频格式
12增强彩条发生器，通过接收视频彩条来测试视频通道是否正常传输
13光功率计，测试光功率值和光纤损耗（可选）
14数字万用表，电压，电流，电阻和电容可测试，连续性测试，二极管测试（可选）
15TDR电缆测试仪，电缆长度和短路测量（BNC电缆，网络电缆等）（可选）
16Visual故障定位仪，用于测试光纤的弯曲和断裂（可选）
17电脑扫描，发送特定信号，方便从混乱电缆找到连接的电缆
18.10x变焦，视频图像可以放大查看详细信息，仅用于模拟视频测试
19视频录制和播放，仅用于模拟视频测试
20.快照并将当前图像保存为SD卡中的JPG文件，仅用于模拟视频测试
21. PING测试，测试IP摄像机或其他网络设备，以太网端口是否正常工作，以及IP地址是否正确
22.视频信号电平测试
视频电平表，峰值视频信号电平，同步信号电平，彩色色度色度电平测量
24. IP地址扫描，快速搜索连接的IP摄像机和其他网络设备的IP地址
25. POE电压测量，测试PoE开关电压到IP摄像机，无线AP设备和其他PD设备
26端口闪烁，通过发送特殊信号轻松找到连接的PoE交换机端口，连接的PoE端口将在特殊频率闪烁
27Link测试，检查设置IP地址是否被占用
28PTZ地址扫描，查找PTZ摄像机的ID
29网络电缆和电话电缆测试，显示连接顺序和LAN电缆的数量
30支持RS232 / RS485 / RS422，速率600°115200bps可调
31多协议，支持三十多种PTZ协议，如Pelco-P，Pelco-D，三星
32PTZ协议分析，控制协议命令显示，检查RS485传输是否正常，容易找到故障设备

1. Multi languages: English/Chinese/Spanish/Italian/French/German/Russian, more than 8 languages optional
2. 7 inches LCD screen display, 800*600 pixels resolution
3. HD SDI digital camera image display and video output (optional), support resolution 1080P 25, 30, 50, 60Hz and 720P 25, 30, 50, 60Hz
4. VGA and HDMI signal input display, convenient to DVR/NVR setting
5. DC 12V/2A power output for camera
6. USB 5V/2A power out, as a power bank
7. LED lamp easy to operate at night
8. microSD card moveable
9. User-defined shortcut keys F1 and F2
10LCD screen brightness/contrast/color saturation adjustable
11Auto-adapt and displays the video format of NTSC/PA
12Enhanced color bar generator, by receiving the video color bar to test the video channel whether transmit normally
13Optical power meter, it test the optical power value and fiber loss (optional)
14Digital multi-meter, voltage, current, resistance and capacitance can be tested, continuity testing, diode testing (optional)
15TDR cable tester, cable length and short-circuit measurement (BNC cable, network cable and more) (optional)
16Visual fault locator, to test fiber's bending and breakage (optional)
17Cable scan, send the specific signal, easy to find the connected cable from the mess cable
18.10x zoom, video image can be magnified to view the details, easy to use only for analog video test
19Video record and playback, only for analog video test
20. Snapshot and save the current image as JPG file in the SD card, only for analog video test
21. PING testing, test IP camera or other network devices, Ethernet port whether work normally, and the IP address whether right
22. Video signal level test
23. Video level meter, peak video signal level, sync signal level, color burst chroma level measurement
24. IP address scan, quickly search the IP address for the connected IP camera and other network devices
25. POE voltage measurement, test the PoE switch voltage to IP cameras, wireless AP device and other PD devices
26Port flicker, easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency
27Link test, check the setting IP address whether occupied
28PTZ address scan, search up the ID of PTZ camera
29Network cable and telephone cable testing, display the sequence of connection and the number of the LAN cable
30Support RS232/RS485/RS422, rate 600° 115200bps adjustable
31Multi-protocol, supports more than thirty PTZ protocols, such as Pelco-P, Pelco-D, Samsung
32PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device