木胶特性（发泡）型材共挤出生产线
挤出机速度通过频率控制，和锥形双螺杆挤出机螺杆芯温度控制调节。 挤出量可提高50％，电可以被保存为20％-30％。
长时间不击穿变速箱硬齿面可以连续工作。 该牵引机结合切割机，这会导致性能稳定，使用寿命长。 在此基础上的设备，增加一套衬钢运输部，改变模具成木塑发泡型材专用模具，该线可以生产塑料型材。
与普通门窗相比，该产品已熄灭高强度，高保温性能，气密性好等性能; 很容易进行组装和塑料焊接和角度间隙仪器没有特殊要求; 它可以在现场，这使得其市场前景光明和应用推广非常容易操作。 这个机械装置不需要选择粒子的单位，因为这些材料和木粉可以直接挤出混合在一起后，以产生木塑料型材。
它也可以通过造粒和挤压在两个步骤; 这是节电，节省空间; 它具有高容量和稳定的挤出功能性质。
预热加料机设置在主挤塑机的顶部。 残留的水在木粉大部分被提前，这使得机械源供给的后续步骤中是较大幅度擦干; 工厂创造了良好的塑化和混合效果。 螺杆的优化设计，使低剪切速率，这让木纤维不被切断，使均匀分布在机器的材料。 螺杆，机筒采用双金属制品治疗，这是耐磨，耐腐蚀，具有长寿命经久耐用。
该生产线能生产PE，PP或PVC木塑型材产品，为广泛的功能性使用，如托盘，包装箱，地板，户外装饰材料等。
它具有木材颗粒和植物纤维的高百分比的源供给（最多50-75％）和宽官能用法满足PP，PE，PVC，ABS，PS和其它材料的同时处理的要求。

Characteristics of wood plastic (foam) profile co-extrusion line
The extruder speed is adjusted by frequency control, and the conical double-screw extruder with screw core temperature control. Extrusion capacity can be increased by 50%, the electricity can be saved as 20%-30%.
Gearbox with hard tooth surface can continuously operate for long time without breakdown. The haul-off unit combines with cutting machine, which causes stable performance and long service time. Based on this equipment, add one set of steel lining transportation unit and change the die into special die for wood plastic foam profile, the line can produce plastic steel profiles.
Compared with ordinary doors and windows, the product has extinguished high strength and high heat preservation function, good air tightness and other properties; it is easy to be assembled and no special requirement for plastic welding and angle clearance instruments; it can be operated on the spot, which makes its market prospects bright and application generalization very easy. This machinery unit does not need to choose particle units, as the material and wood powder can be directly extruded together to produce wood plastic profiles after mixing.
It can also adopt pelletizing and extrusion in two steps; it is electricity saving and space saving; it has properties of high capacity and stable extrusion function.
The preheat feeding machine is set on the top of main extruder. Residual water in large percentage of wood powder are dried off in advance, which makes the later step of machinery source feeding is more substantial; the facility creates good plasticizing and mixing effect. The optimization design of the screw makes low shearing rate, which leaves the wood fiber not to be cut off and makes the materials well distributed in the machine. Screw & barrel adopts bi-metalic treatment, which is wear-resistant, corrosion-resistant and has long endurable life.
The production line can produce PE, PP or PVC wood-plastic profile products for wide functional usage, such as trays, boxes, flooring, outdoor decoration materials and etc.
It has high percentage source feeding of wood particles and plant fibers (maximum 50-75%) and wide functional usage which meets the requirement of simultaneous processing of PP, PE, PVC, ABS, PS and other materials.