PE Carbon Spiral Reinforcing Pipe Production Line

PE Carbon Spiral Reinforcing Pipe Production Line

PE碳素螺旋增强管材生产线

议价

加入意向

PE碳素螺旋增强管材生产线 配备了专用隔板混合螺杆和螺旋结构一起死合理转轮和光滑内外壁的管道。
上浆和冷却模式中的具体的设计是:生产范围50-20mm,在高达0.6-1.5m / min的生产速度的。 所有种类的聚烯烃材料制成的,多层螺旋增强管可被共挤出为各种用途,和80%的再循环材料的可在生产中使用。 最佳螺旋青铜定径套,与在高考前的冷却装置和强力吸真空装置,适用于管道的高速挤出。 特定设计的喷淋冷却罐:箱主体是由不锈钢制成。 高效散热来源于高效率的水泵和特殊的喷嘴; 电动机的纵向移动,可实现三维调节。 先进共挤技术并使用利用最回收材料可以降低成本。 该碳素螺旋管主要由高密度聚乙烯和改性碳,采用新的电缆保护管通过特殊的挤出和滚塑工艺制作。 作为螺丝的特殊形状,它具有高强度,高韧性,耐腐蚀,耐温,绝缘电阻高,阻燃性好,重量轻,使用寿命长,不易变形等产品的优势已被广泛应用于 在地面覆盖的城市路灯线路工程,铺设和电气化铁路电力电缆和通信电缆,建设和改造公路电力和通讯设施,地面覆盖电缆接地面积住宅小区建设,公园和大型娱乐场所等项目,这是 最佳的地面覆盖电缆保护管。



主要技术参数:
模型
SJ90 / 30
材料
HDPE
挤出机型号
SJ90 / 30
直径范围毫米
50-200
电机功率
45千瓦
最大。 挤出量
240千克/小时
生产速度m /分钟
0.6-1.5
标准化规范
模型
内径
直径
距离
潜在的长度
(m)
Φ40
40±2.0
53.5±2.0
13±0.8
200
Φ50
49.5±2.5
67±1.0
17±1.0
200
Φ65
65±2.0
84.5±2.5
21±1.0
200
Φ80
80±3.0
105±3.0
25±1.0
100
Φ100
100±4.0
130±4.0
30±1.0
100
Φ125
125±4.0
160±4.0
38±1.0
100
Φ150
150±4.0
185±4.0
45±1.0
50
Φ175
175±4.0
230±4.0
55±1.0
50
Φ200
200±4.0
260±4.0
60±1.5
40

PE carbon spiral reinforcing pipe production line is equipped with the dedicated separator mixing screw and spiral structure die with reasonable runner and smooth inside and outside wall of pipes.
The specific design for sizing and cooling mode is capable of producing pipe scope 50-20mm, at a production speed of up to 0.6-1.5m/ min. All kind of polyolefin material, multi-layers spiral reinforcing pipes can be co-extruded for various uses, and 80% of recycle material can be used in production. Optimum spiral bronze sizing sleeve, with pre-cooling and powerful vacuum suction device in the entrance, is suitable for high speed extrusion of pipes. Specific design for spray cooling tank: the tank body is made of stainless steel. High efficient cooling comes from high efficient water pump and peculiar spraying nozzle; longitudinal move of the motor can realize three-dimensional regulation. Advanced co-extrusion technology and using the using the most of the recycling material can lower the cost. The carbon spiral pipe is mainly made of high density polythene and modified carbon, adopting new cable protection pipe produced by special extrusion and rotational molding technology. Being in the special shape of screw, it has the advantages of high strength, high toughness, corrosion resistance, temperature tolerance, high insulation resistance, good flame retardant, light weight, long service life and uneasy deformation etc. The product has been widely used in ground covering project of city street lamp lines, laying and ground covering of electrified railway power and communication cables, construction and reconstruction of highway power and communication installations, cable ground covering projects of residential area construction and park and large entertainment places etc. It is the optimal ground covering cable protection pipe.



Main technical parameter
Model
SJ90/30
Material
HDPE
Model of extruder
SJ90/30
Diameter scope mm
50-200
Motor power
45kw
Max. extrusion capacity
240kg/ h
Production speedm/ min
0.6-1.5
Standardized specifications
Model
Inner diameter
Diameter
Distance
Potential length
(m)
Φ40
40±2.0
53.5±2.0
13±0.8
200
Φ50
49.5±2.5
67±1.0
17±1.0
200
Φ65
65±2.0
84.5±2.5
21±1.0
200
Φ80
80±3.0
105±3.0
25±1.0
100
Φ100
100±4.0
130±4.0
30±1.0
100
Φ125
125±4.0
160±4.0
38±1.0
100
Φ150
150±4.0
185±4.0
45±1.0
50
Φ175
175±4.0
230±4.0
55±1.0
50
Φ200
200±4.0
260±4.0
60±1.5
40