120PCS 3528 0.6M T8 18W LED灯管
| 包装细节: | 1.数量/箱:25PCS 2 Cartion尺寸:62 * 22×22厘米3,毛重:60公斤/箱 |
|---|---|
| 交货详细信息: | 6天 |
LED日光灯,LED日光灯,LED橱柜灯:环境温度:-40〜60摄氏度,耗电量:最大10
LED T8,LED灯管,LED日光灯照明,led灯管,T8 LED灯管,LED办公照明,led日光灯,LED日光灯,LED更换灯管,LED筒灯,LED日光灯8,T8 LED灯管,T8 LED日光灯管 ,LED T8灯管,LED T8灯管,LED商业照明,LED商业照明,LED发光管,导致灯管,led日光灯管,LED日光灯照明,更换LED灯,T8荧光灯,LED更换管灯,LED T8 采光
产品编号:T8
产品特点:
1)工作电压:85-265V
2)总计:288颗超亮LED,用于1.2米和120个0.6米。
3)光输出:最大输出:1900lm
4)环境温度:-40〜60摄氏度
5)功率消耗:最大8W
6)直径:2.54厘米,长度:60厘米/120厘米,净重:0.497千克为120厘米
7)可以直接放置在传统的T8荧光灯支架,取出镇流器
更换前启动!
8)色温:5500K〜6000K,4000K〜4500K,2800K〜3300K
9)高性能贴片领导:低光降解,高达75%的流明维持率后35.000小时操作
10)齐纳二极管用于避免全组LED缺陷
11)特殊的艺术品:阳极氧化处理的铝背hoursing
12)塑料端盖确保通过4000V耐压试验
13)独特的热管理:铝制背壳有效地散发内部热量
14)高功率因数:0.97
应用范围:
替代传统日光灯管




| Packaging Details: | 1. Quantity/ carton: 25PCS 2. Cartion size: 62*22*22cm 3. Gross Weight: 60 KG/ Carton |
|---|---|
| Delivery Detail: | 6 days |
LED Tube Lighting, LED Tube Light, LED Cabinet Light : Ambient Temperature: -40- 60 degrees Celsius, Power Consumption: max 10
Led T8, led tube light, led tube lighting, led tube, T8 led tube, led office lighting, led fluorescent light, led fluorescent lamp, LED Replacement Tubes, LED Tube Lamp, LED Tube 8, T8 LED Tube, T8 LED Flourescent Tube, LED T8 Tube, LED T8 Tube Light, LED Commercial Light, LED Commercial Lighting, led light tube, led lamp tube, led fluorescent tube, LED Fluorescent Tube Light, replacement led lamp, T8 Fluorescent Light, LED Replacement Tube Lamp, LED T8 Lighting
Item NO: T8
Features:
1) Working Voltage: 85-265V
2) Total: 288 pcs super bright LEDs for 1.2meter and 120 pcs for 0.6 meters.
3) Light output: max output: 1900lm
4) Ambient Temperature: -40 ~ 60 degrees Celsius
5) Power Consumption: max 8W
6) Diameter: 2.54cm, length: 60cm/ 120cm, Net weight: 0.497kg for 120cm
7) Can be directly placed in conventional T8 fluorescent brackets, remove ballast
and starter before replacement!
8) Color temperature: 5500K~6000K, 4000K~4500K, 2800K~3300K
9) High performance SMD led: low light degradation, up to 75% lumen maintenance after 35.000 hours operating
10) Zener Diode applied to avoid full set of leds defect
11) Special artwork: Anodize aluminum back hoursing
12) Plastic end caps ensure to pass 4000V HI-POT test
13) Unique thermal management: Aluminum back casing dissipate the inside heat efficiently
14) High power factor: 0.97
Applications:
Replacement for conventional fluorescent tubes



