4x4 optical Switches
4×4光开关
议价
加入意向4X4光开关规格
4×4光开关
应用：
环网
光网络中的远程监控
光纤的测试，光学元件
特征：
低插入损耗
宽波长范围
低串扰
高稳定性，高可靠性
并行接口（TTL）
环氧 - 自由光路上
44光开关 是一种装置，用光学路由交换机的能力。在光纤传输系统中，它被用于光学线路控制，局域网，光源/检测器转换，并保护以太网等在光纤测试系统的变化，它是用于光纤和光纤装置测试，网络测试露天光缆测试和光纤传感
产品规格：
| 参数 | 4X4光开关 | ||
| Wavelengt范围（nm） | 1310或1490或1550（SM）的 | 1310 1490 1550＆（MM） | 850或1310（MM） |
| 插入损耗（dB） | 典型值：1.5最大：2.5 | 典型值：1.8最大：2.8 | 典型值：1.8最大：2.8 |
| PDL（分贝） | 0.05 | ||
| 回波损耗（分贝） | SM50，MM30 | ||
| WDL（分贝） | 0.25 | ||
| TDL（分贝） | 0.25 | ||
| 串扰（分贝） | SM55，MM35 | ||
| 重复性（分贝） | 堋0.02 | ||
| 电源电压（V） | 5.0 | ||
| 寿命（时间） | 107 | ||
| 切换时间（ms） | 8 | ||
| 传输PowermV | 500 | ||
| 工作温度（） | -20+70 | ||
| 储存温度 （） | -40~+85 | ||
| 包装尺寸（长x宽x高）（mm） | （L）110X（宽）95X（H）15 | ||
44光开关引脚：
| 1 | D0 | 11 | D6 |
| 2 | D1 | 12 | D7 |
| 3 | D2 | 13 | S0 |
| 4 | D3 | 14 | S1 |
| 5 | / EN | 15 | S2 |
| 6 | RST | 16 | S3 |
| 7 | VCC | 17 | S4 |
| 8 | GND | 18 | S5 |
| 9 | D4 | 19 | S6 |
| 10 | D5 | 20 | S7 |
4×4光开关真值表：
| 输入路线 | 控制引脚 | 输出路径 | 查询状态值 | |||
| 第一路线 | D0 | D1 | 值 | | S0 | S1 |
| 0 | 0 | 0 | 11 | 0 | 0 | |
| 1 | 0 | 1 | 12 | 1 | 0 | |
| 0 | 1 | 2 | 13 | 0 | 1 | |
| 1 | 1 | 3 | 14 | 1 | 1 | |
| 第二条路线 | D2 | D3 | 值 | | S2 | S3 |
| 0 | 0 | 0 | 21 | 0 | 0 | |
| 1 | 0 | 1 | 22 | 1 | 0 | |
| 0 | 1 | 2 | 23 | 0 | 1 | |
| 1 | 1 | 3 | 24 | 1 | 1 | |
| 第三条道路 | D4 | D5 | 值 | | S4 | S5 |
| 0 | 0 | 0 | 31 | 0 | 0 | |
| 1 | 0 | 1 | 32 | 1 | 0 | |
| 0 | 1 | 2 | 33 | 0 | 1 | |
| 1 | 1 | 3 | 34 | 1 | 1 | |
| 第四路线 | D6 | D7 | 值 | | S6 | S7 |
| 0 | 0 | 0 | 41 | 0 | 0 | |
| 1 | 0 | 1 | 42 | 1 | 0 | |
| 0 | 1 | 2 | 43 | 0 | 1 | |
| 1 | 1 | 3 | 44 | 1 | 1 | |
订购信息：4×4-A-B-C-D-E-F-G-H
| A | B | C | E | F | G | H |
| 模式 | 波长 | 电压类型 | 光纤类型 | 光纤直径 | 光纤长度 | 连接器 |
| 小号：SM L：MM | 85：850纳米 13：1310 14：1490 15：1550 162：1625 165：1650nm 13/15：1310/1550 X：其它 | 3: 3V 5: 5V | 5: 50/1256: 62.5/125 9: 9/125 X：其它 | 25：250um 90：900um; 20：2.0毫米 30：3.0毫米 X：其它 | 05: 0.5m 10: 1.0m 15: 1.5m X：其它 | 面向对象：无 FP：FC / PC FA：FC / APC SP：SC / PC SA：SC / APC SP：ST / PC SA：ST / APC LP：LC / PC LA：LC / APC X：其它 |
注意：
欢迎联系我们的工程师了解该规范的详细信息。
4X4 Optical Switch Specification
4x4 optical Switches
Applications:
Ring network
Remote monitoring in optical network
Testing of fiber, optical Component
Features:
Low Insertion Loss
Wide Wavelength Range
Low crosstalk
High Stability, High reliability
Parallel Interface (TTL)
Epoxy-free on optical path
44 Optical switch is a kind of device , with the ability of optical route switch. In optic fiber transmission system, it is used for optical route controlling, LAN, light source / detector changing, and protecting the change of Ethernet etc. In optical fiber test system, it is used for optical fiber and optical fiber device testing, network testing, open-air optical cable testing and optical fiber sensing
Specifications:
| Parameter | 4X4 optical switch | ||
| Wavelengt Range (nm) | 1310 or 1490 or 1550 (SM) | 1310 & 1490 & 1550 (MM) | 850 or 1310 (MM) |
| Insertion Loss (dB) | Typ: 1.5 Max: 2.5 | Typ: 1.8 Max: 2.8 | Typ: 1.8 Max: 2.8 |
| PDL (dB) | 0.05 | ||
| Return Loss (dB) | SM50 , MM30 | ||
| WDL (dB) | 0.25 | ||
| TDL (dB) | 0.25 | ||
| Crosstalk (dB) | SM55 , MM35 | ||
| Repeatability (dB) | 堋0.02 | ||
| Power supply (V) | 5.0 | ||
| Life time (time) | 107 | ||
| Switch Time (ms) | 8 | ||
| Transmission PowermV | 500 | ||
| Operation temperature () | -20+70 | ||
| Storage temperature () | -40~+85 | ||
| Package Size (L x W x H) (mm) | (L) 110x (W) 95x (H) 15 | ||
44 Optical switch Pins:
| 1 | D0 | 11 | D6 |
| 2 | D1 | 12 | D7 |
| 3 | D2 | 13 | S0 |
| 4 | D3 | 14 | S1 |
| 5 | /EN | 15 | S2 |
| 6 | RST | 16 | S3 |
| 7 | VCC | 17 | S4 |
| 8 | GND | 18 | S5 |
| 9 | D4 | 19 | S6 |
| 10 | D5 | 20 | S7 |
4x4 optical switch Truth Table:
| Input routes | Control pin | Output route | Inquiring status value | |||
| First Route | D0 | D1 | Value | | S0 | S1 |
| 0 | 0 | 0 | 11 | 0 | 0 | |
| 1 | 0 | 1 | 12 | 1 | 0 | |
| 0 | 1 | 2 | 13 | 0 | 1 | |
| 1 | 1 | 3 | 14 | 1 | 1 | |
| Second Route | D2 | D3 | Value | | S2 | S3 |
| 0 | 0 | 0 | 21 | 0 | 0 | |
| 1 | 0 | 1 | 22 | 1 | 0 | |
| 0 | 1 | 2 | 23 | 0 | 1 | |
| 1 | 1 | 3 | 24 | 1 | 1 | |
| Third Route | D4 | D5 | Value | | S4 | S5 |
| 0 | 0 | 0 | 31 | 0 | 0 | |
| 1 | 0 | 1 | 32 | 1 | 0 | |
| 0 | 1 | 2 | 33 | 0 | 1 | |
| 1 | 1 | 3 | 34 | 1 | 1 | |
| Fourth Route | D6 | D7 | Value | | S6 | S7 |
| 0 | 0 | 0 | 41 | 0 | 0 | |
| 1 | 0 | 1 | 42 | 1 | 0 | |
| 0 | 1 | 2 | 43 | 0 | 1 | |
| 1 | 1 | 3 | 44 | 1 | 1 | |
Ordering Information: 4x4-A-B-C-D-E-F-G-H
| A | B | C | E | F | G | H |
| Mode | Wavelength | Voltage Type | Fiber type | Fiber diameter | Fiber Length | Connector |
| S: SM M: MM | 85: 850nm 13: 1310nm 14: 1490nm 15: 1550nm 162: 1625nm 165: 1650nm 13/15: 1310/1550nm X: Other | 3: 3V 5: 5V | 5: 50/1256: 62.5/125 9: 9/125 X: Other | 25: 250um 90: 900um; 20: 2.0mm 30: 3.0mm X: Other | 05: 0.5m 10: 1.0m 15: 1.5m X: Other | OO: None FP: FC/ PC FA: FC/ APC SP: SC/ PC SA: SC/ APC SP: ST/ PC SA: ST/ APC LP: LC/ PC LA: LC/ APC X: Other |
Note:
Welcome to contact our engineers to know more info about the specification.
