2x4 optical Switch
2X4光开关
议价
加入意向2X4光开关规格
2X4光开关
应用范围：
光路由交换机
系统监视器
研发实验室
可配置OADM
产品特点：
宽波长范围
低串扰
高稳定性，高可靠性
独特的专利：非胶在光路
简单的控制
2X4光开关 ，单模和多模，以其体积小，性能可靠，简单的控制方式。 这是OADMOXCsystem监控和保护的理想元件。 随着紧凑型封装，它可以很容易地集成到一个高密度的光通信系统。
技术参数：
| 参数 | Anfiber-FSW-24 | |||||
| 波长范围nm | 1310或1490或1550（SM）的 | 1310 1490 1550＆（SM）的 | 850或1310（MM） | |||
| 插入损耗分贝 | 典型值：1.5 | 马克斯：1.8 | 典型值：1.8 | 马克斯：2.0 | 典型值：1.8 | 马克斯：2.0 |
| PDL分贝 | 0.05 | |||||
| 回波损耗分贝 | SM50 MM30 | |||||
| WDL分贝 | 0.25 | |||||
| 串扰分贝 | SM55 MM35 | |||||
| 重复性分贝 | ܡ0.02 | |||||
| 驱动电压V | 5.0 | |||||
| 寿命时间 | 107 | |||||
| 开关时间ms | 8 | |||||
| 发射功率毫瓦 | 500 | |||||
| 工作温度 | -20~+70 | |||||
| 储存温度 | -40~+85 | |||||
| 外形尺寸mm | （L），95（W）76（H）15 | |||||
| | | |||||
24光开关引脚：
引脚号 引脚名称 功能说明 引脚号 引脚名称 功能说明 1 D0 1输入控制信号输入 11 NC 2 D1 1输入控制信号输入 12 NC 3 D2 2输入控制信号输入 13 S0 输入1的状态是输出位 4 D3 2输入控制信号输入 14 S1 输入1的状态是输出位 5 / EN 使能（低电平有效） 15 S2 输入2的状态是输出位 6 RST 复位（高电平有效） 16 S3 输入2的状态是输出位 7 VCC 动力源 17 NC 8 GND 电源地 18 NC 9 NC 19 NC 10 NC 20 NC
24光开关控制：
| 选择路线 | 控制引脚 | 查询状态值 | |||||||
| D0 | D1 | D2 | D3 | S0 | S1 | S2 | S3 | ||
| 11 | 22 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 |
| 23 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | |
| 24 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | |
| 12 | 21 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 0 |
| 23 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | |
| 24 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | |
| 13 | 21 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 0 |
| 22 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | |
| 24 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | |
| 14 | 21 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 |
| 22 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | |
| 23 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | |
注意
1.在光学输入即输入通道的数目，并经过它是输出通道的数量。
2. Controling引脚D0，D1控制输入1; 和D2，D3控制输入2。
3.输入1和输入2不能选择同一个输出通道。
2X4光开关订货信息：2X4-ABCDEFGH
| A | B | C | E | F | G | H |
| 模式 | 波长 | 电压类型 | 光纤类型 | 光纤直径 | 纤维长度 | 连接器 |
| S：SM M：MM | 85：850纳米 13：1310 14：1490 15：1550 162：1625 165：1650nm 13/15：1310/1550 X：其它 | 3: 3V 5: 5V | 5: 50/1256: 62.5/125 9: 9/125 X：其它 | 25：250um 90：900um; 20：2.0毫米 30：3.0毫米 X：其它 | 05: 0.5m 10: 1.0m 15: 1.5m X：其它 | 面向对象：无 FP：FC / PC FA：FC / APC SP：SC / PC SA：SC / APC SP：ST / PC SA：ST / APC LP：LC / PC LA：LC / APC X：其它 |
注意：
欢迎联系我们的工程师了解该规范的更多信息。
2x4 Optical Switch Specification
2x4 optical Switch
Applications:
Optical route switch
System Monitor
R&D in Laboratory
Configurable OADM
Features:
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Unique Patent: non-glue in optical route
Simple control
2x4 Optical Switch,single mode and multi mode, is famous for its small volume , reliable performance, simple control mode. It is an ideal Component for OADMOXCsystem monitor and protection. With compact package, it could be easy to integrate into a high density optical communication system.
Specifications:
| Parameters | Anfiber-FSW-24 | |||||
| Wavelength Range nm | 1310 or 1490 or 1550 (SM) | 1310 & 1490 & 1550 (SM) | 850 or 1310 (MM) | |||
| Insertion Loss dB | Typ: 1.5 | Max: 1.8 | Typ: 1.8 | Max: 2.0 | Typ: 1.8 | Max: 2.0 |
| PDL dB | 0.05 | |||||
| Return loss dB | SM50 MM30 | |||||
| WDL dB | 0.25 | |||||
| Crosstalk dB | SM55 MM35 | |||||
| Repeatability dB | ܡ0.02 | |||||
| Drive Voltage v | 5.0 | |||||
| Lifetime time | 107 | |||||
| Switch Time ms | 8 | |||||
| Transmission Power mW | 500 | |||||
| Operation Temperature | -20~+70 | |||||
| Storage Temperature | -40~+85 | |||||
| Dimension mm | (L) 95 (W) 76 (H) 15 | |||||
| | | |||||
24 Optical Switch Pins:
Pin No Pin Name Function description Pin No Pin Name Function description 1 D0 Input 1 control signal input 11 NC 2 D1 Input 1 control signal input 12 NC 3 D2 Input 2 control signal input 13 S0 Status of Input 1 is Output bit 4 D3 Input 2 control signal input 14 S1 Status of Input 1 is Output bit 5 /EN Enable (active low) 15 S2 Status of Input 2 is Output bit 6 RST Reset (active high) 16 S3 Status of Input 2 is Output bit 7 VCC power source 17 NC 8 GND Power ground 18 NC 9 NC 19 NC 10 NC 20 NC
24 Optical Switch Control:
| Selected Route | Controlling pins | Inquiring status values | |||||||
| D0 | D1 | D2 | D3 | S0 | S1 | S2 | S3 | ||
| 11 | 22 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 |
| 23 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | |
| 24 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | |
| 12 | 21 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 0 |
| 23 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | |
| 24 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | |
| 13 | 21 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 0 |
| 22 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | |
| 24 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | |
| 14 | 21 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 |
| 22 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | |
| 23 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | |
Notice
1. Before Optical input that is the number of input channels, and after it is the number of output channels.
2. Controling pins D0, D1 controls input 1; and D2, D3 controls input 2.
3. Input 1 and input 2 can not select the same output channel.
2x4 optical switch Ordering Information: 2x4-A-B-C-D-E-F-G-H
| A | B | C | E | F | G | H |
| Mode | Wavelength | Voltage Type | Fiber type | Fiber diameter | Fiber Length | Connector |
| S: SM M: MM | 85: 850nm 13: 1310nm 14: 1490nm 15: 1550nm 162: 1625nm 165: 1650nm 13/15: 1310/1550nm X: Other | 3: 3V 5: 5V | 5: 50/1256: 62.5/125 9: 9/125 X: Other | 25: 250um 90: 900um; 20: 2.0mm 30: 3.0mm X: Other | 05: 0.5m 10: 1.0m 15: 1.5m X: Other | OO: None FP: FC/ PC FA: FC/ APC SP: SC/ PC SA: SC/ APC SP: ST/ PC SA: ST/ APC LP: LC/ PC LA: LC/ APC X: Other |
Note:
Welcome to contact our engineers to know more info about the specification.
