DC to DC LED Driver with 2 to 9W Constant Current and 12/24V DC Input

DC to DC LED Driver with 2 to 9W Constant Current and 12/24V DC Input

直流到直流LED驱动器，具有2到9W恒定电流和12 / 24V直流输入

议价

加入意向
  • 直流到直流系列认证
  • 1〜9瓦单输出
  • 尺寸：18 x 21 x 12mm
  • 特征：
    • 适用于高亮度发光二极管产品
    • 带12 / 24V直流输入
    • 完全隔离的塑料盒剥离
    • 内置恒流限流设计
    • 工作从-10到40满载
    • 保护：OVP / OLP / SCP
    • 1年保修
  • 产品规格：
    • 部件号：fld3510-12，fld7012-12，fld3508-24，fld3520-24和fld7012-24
    • 输出工作电压：3〜10V，3〜12V，3〜8V，3〜20V，3〜12V
    • 额定电流：350mA±10％，650mA±10％，350mA±10％，350mA±10％，650mA±10％
    • 额定最大功率：2,9,2,5和9W
    • 效率：（典型）> 80％
    • 上升时间： <30ms at full load
    • 输入电压范围：10.5〜13.5V DC，10.5〜13.5V DC，22〜26V DC，22〜26V DC，22〜26V AC
    • 电流：0.2A在12V DC / 0.1A在24 DC
    • 保护：
      • 过载（额定输出功率为100至135％，故障条件消除后自动恢复）
      • 短路类型：打嗝模式，删除故障后自动恢复
      • 过压105〜120％额定输出电压
    • 环境：
      • 工作温度：-10〜40满载
      • 工作湿度：20〜95％RH无冷凝
      • 存储温度：-20至+80
      • 存储湿度：10〜95％RH
    • 振动：10〜500Hz，2G 10min / 1周期，周期为X，Y，Z轴60min
    • 安全和EMC：
      • 安全标准：符合EN61347-1，EN61347-2-13
      • EMI传导和辐射：EN61347-2-13
      • 满足：en55015，en61547，en61000-4-2，3，4，5，6，8，11
    • 其他：
      • mtbf：最小400k小时，mil-hdbk-217f（25）
      • 尺寸：18 x 21 x 12mm
      • 包装/纸箱：27 x 24 x 28厘米，100pcs /纸箱
      • 重量：50g
      • EMS免疫
    • 备注：
      • 所有未特别提及的参数均在230VAC输入，额定负载和25环境温度下测量

  • DC to DC series approvals
  • 1 to 9 watts single output
  • Dimensions: 18 x 21 x 12mm
  • Features:
    • For high brightness light-emitting diode products
    • With 12/24V DC input
    • Fully isolated plastic case with stripped
    • Built-in constant current limiting design
    • Operating from -10 to 40 full load
    • Protections: OVP/OLP/SCP
    • 1 year warranty
  • Specifications:
    • Part number: FLD3510-12, FLD7012-12, FLD3508-24, FLD3520-24,and FLD7012-24
    • Output operating voltage: 3 to 10V, 3 to 12V, 3 to 8V, 3 to20V, and 3 to 12V
    • Rated current: 350mA ±10%, 650mA ±10%, 350mA±10%, 350mA ±10%, and 650mA ±10%
    • Rated maximum power: 2, 9, 2, 5, and 9W
    • Efficiency: (typical) ﹥80%
    • Rise time: <30ms at full load
    • Input voltage range: 10.5 to 13.5V DC, 10.5 to 13.5V DC, 22 to26V DC, 22 to 26V DC, 22 to 26V AC
    • Current: 0.2A at 12V DC/0.1A at 24 DC
    • Protections:
      • Overload (100 to 135% rated output power, recoversautomatically after fault condition has been removed)
      • Short circuit type: hiccup mode, recovers automatically afterfault condition is removed
      • Over voltage 105 to 120% rated output voltage
    • Environment:
      • Operating temperature: -10 to 40 full load
      • Operating humidity: 20 to 95% RH non-condensing
      • Storage temperature: -20 to +80
      • Storage humidity: 10 to 95% RH
    • Vibration: 10 to 500Hz, 2G 10min/1 cycle, period for 60min eachalong X, Y, Z axes
    • Safety and EMC:
      • Safety standards: meet EN61347-1, EN61347-2-13
      • EMI conduction and radiation: EN61347-2-13
      • Meet: EN55015, EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11
    • Others:
      • MTBF: 400K hours minimum, MIL-HDBK-217F(25)
      • Dimensions: 18 x 21 x 12mm
      • Packing/carton: 27 x 24 x 28cm, 100pcs/carton
      • Weight: 50g
      • EMS immunity
    • Remark:
      • All parameters not specially mentioned are measured at 230V ACinput, rated load and 25 ambient temperature