CCTV Camera Kit with 5' Digital Screen TFT Monitor for Safety Vehicle Farm Surveillance
CCTV摄像机套件与5'数字屏幕TFT显示器安全车农场监视
议价
加入意向
- CCTV摄像机套件与CCTV摄像机TFT液晶显示器
- 用于安全车辆农场监视
- 5'数字屏幕TFT显示器带可拆卸的遮阳板,屏幕菜单的所有设置:
- 正常/镜像视图,自动开启(通过倒档和/或方向灯),内置CCD传感器用于照明控制旋钮
- CCTV摄像机内置红外LED,防水:IP66
- 产品规格:
- 防水颜色CCTV摄像机(型号:DF-8073):
- 图像类型:1/3颜色夏普CCD
- 水平分辨率:420TV线
- 有效像素:NTSC:510(H)×492(V); PAL:500(H)x 582(V)
- 备用相机可用照明:0lux(夜视10M的18个LED)
- 自由视角:130°
- 备用相机防水:IP68
- 防震:10G
- 视频输出:1.0Vp-p,75©
- 电源:逆变显示器的直流12V
- 尺寸:69(宽)x 43(高)x 38(深)mm(无安装)
- 5寸数字屏幕TFT LCD倒车显示器(型号:SP-527):
- 5'数字屏幕彩色倒车显示器,带可拆卸sunvisor
- 显示分辨率:640(H)x 3RGB x 480(V)点
- 颜色系统:PAL / NTSC(自动)
- OSD菜单分别设置每个摄像机的触发优先级
- OSD菜单分别设置每个摄像机反转图像延迟时间0到30'
- OSD菜单分别设置每个镜头/正常图像
- 手动和自动切换显示模式
- 支持两个摄像头视频输入:1.0Vp-p,75©
- 广视角(CR> 10):(上/下):45/65(左/右):65/65
- 亮度(cd / m2): 300
- 对比度:500:1
- 背光:单个LED
- 工作温度:-20至+70℃
- 存储温度:-30至+80
- 电源:DC 11〜32V
- 外形尺寸(长x宽x高):150 x 118 x 23毫米(无安装)
- 重量约:279g
- 附件:显示器支架,15米电缆,电气连接电缆,用户手册,全功能遥控器
- CCTV camera kit with CCTV camera TFT LCD monitor
- For safety vehicle farm surveillance
- 5' digital screen TFT monitor with removable sun visor, on-screen menu for all settings:
- Normal/mirror view, automatic switch on (by reverse gear and orby direction lights), built-in CCD sensor for illumination of the control knobs
- CCTV camera built-in IR LED's, water resistance: IP66
- Specifications:
- Waterproof color CCTV camera (model No.: DF-8073):
- Image type: 1/3 Color Sharp CCD
- Horizontal resolution: 420TV Lines
- Effective pixel: NTSC: 510 (H) x 492 (V); PAL: 500 (H) x 582(V)
- Backup camera usable illumination: 0lux (18pcs LEDs for nightvision 10M)
- Free viewing angle: 130°
- Backup camera waterproof: IP68
- Shockproof: 10G
- Video output: 1.0Vp-p, 75©
- Power supply: DC 12V from reversing monitor
- Dimensions: 69 (W) x 43 (H) x 38 (D) mm (without mounting)
- 5-inch digital screen TFT LCD reversing monitor (model No.:SP-527):
- 5' digital screen color reversing monitor with removable sunvisor
- Display resolution: 640 (H) x 3RGB x 480 (V) dot
- Color system: PAL/NTSC (auto)
- OSD menu separately set each camera trigger priority
- OSD menu separately set each camera reversing image delay time0 to 30'
- OSD menu separately set each camera mirror/normal image
- Manual and automatic switch display mode
- Supports two camera video inputs: 1.0Vp-p, 75©
- Wide view angle (CR﹥10): (up/ down): 45/65 (left/right):65/65
- Brightness (cd/m2): 300
- Contrast ratio: 500:1
- Back-light: single LED
- Operating temperature: -20 to +70
- Storage temperature: -30 to +80
- Power supply: DC 11 to 32V
- External dimensions (L x W x T): 150 x 118 x 23mm (withoutmounting)
- Weight approximate: 279g
- Accessories: monitor bracket, 15m cable, electrical connecting cable, user's manual, full function remote controller





