Multifunction Cable Tracker and Tester

Multifunction Cable Tracker and Tester

多功能电缆跟踪仪和测试仪

45-50 USD

加入意向
  • 特征：
    • 一个人足以完成电缆连续性检查
    • 直接搜索5E，6E，电话线，同轴电缆，USB电缆等电缆
    • 检查5E，6E，电话线，同轴电缆，USB电缆的接线错误，如开路，短路，跳线，反向连接或串扰干扰
    • 找到接线或连接错误
    • 测量电缆长度并确定开路和短路的距离
    • 动态校准电缆长度，使长度测量精确到97％
    • 简单易用
    • 大屏幕显示测试结果清晰
    • 电池寿命长（等待50小时）的便携式设备
    • 自动延时关断和背光显示功能
    • 使用或不使用远端识别器测量长度和对
    • 定位电缆，有8个远端无源测试插孔（ID NoID1-ID 8）
    • 远端识别器与提示语音
    • 自检功能，并自动补偿电池容量或环境温度的任何变化
    • 单板计算机软件看门狗设计和可靠操作
  • 产品规格：
    • 外形尺寸：
      • 主要测试仪：185x105x50mm
      • 接收器：218x46x29mm
      • 远程标识符：84x34x27mm
    • 电源：两个9V的层压电池
    • 显示：特殊4 x 16字大屏幕液晶格（有效视野61.6 x 25.2mm）
    • 测试电缆类型：STP / UTP双绞线，同轴电缆，电话线
    • 检测电缆类型：5E，6E，电话线，同轴电缆，USB电缆等金属线
    • 工作环境温度：-10- +60ºC
    • 测试仪端口：测试仪RJ45主端口（M），测试仪LOOPBACK RJ45端口（L），寻道RJ45端口（带RJ45），远程标识符RJ45端口
    • 额外的BNC和RJ11转换器用于测量和检查同轴电缆和电话线的连续性
    • 双绞线长度测量：
    • 适用范围：1-350M（3-200英尺）
    • 校准精度：3％（+/- 0.5M或+/- 1.5 ft）（校准电缆> 5M），运输精度：5％（+/- 0.5 M或+/- 1.5 ft）
    • （AMP，AT＆T 5类电缆），显示：M或ft
    • 长度校准：用户可以用给定长度的电缆自己设置校准因子
    • 校准电缆长度大于5M
    • 线序和定位电缆错误：检查诸如开路，短路，反向连接，交叉或串扰干扰等错误
    • 定位电缆：8个远程标识符测试插孔（ID1≥ID8）
    • 自动延时关断时间：测试仪不工作30分钟
    • 包装：30pcs / ctn，尺寸：49 * 45 * 46厘米，毛重：22.0公斤

  • Feature:
    • One person enough to complete cable continuity check
    • Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables
    • Check wiring error in 5E, 6E, telephone line, coaxial cable, USB cable and such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
    • Locate the wiring or connection error
    • Measure cable length and determine the distance of open circuit and short circuit
    • Dynamically calibrate cable length and make length measurement as accurate as 97%
    • Simple and easy use
    • Big screen to display test result clear
    • Portable unit with long battery life (wait-case 50 hours)
    • Automatically time-delay shut off and backlight display function
    • Measure length and pair with or without far-end recognizer
    • Locate cable and there are 8 far-end passive test jacks (ID NoID1-ID 8)
    • Far-end recognizer with prompting voice
    • Self-checking function and automatically compensate any change in battery capacity or ambient temperature
    • Single board computer software watchdog design and reliable operation
  • Specifications:
    • Overall dimension:
      • Main tester: 185x105x50mm
      • Receiver: 218x46x29mm
      • Remote identifier: 84x34x27mm
    • Power: two laminated batteries of 9V
    • Display: special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2mm)
    • Type of cable tested: STP/UTP twin twisted cable, coaxial cable, telephone line
    • Type of cable detected: 5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires
    • Ambient temperature in work: -10-+60ºC
    • Tester port: tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), hunting RJ45 port (With RJ45), remote identifier RJ45 port (R)
    • The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
    • Length measurement of twin twisted cable:
    • Scope: 1-350M (3-200ft)
    • Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft) (calibrating cable ﹥ 5M), Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft)
    • (AMP, AT&T Class 5 cable), display: M or ft
    • Length calibration: user can set calibration factor by himself with a given length cable
    • Length of calibrating cable is more than 5M
    • Wire sequence and locating cable error: check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference
    • Locating cable: 8 remote identifier test jacks (ID 1≥ID 8)
    • Automatic time-delay shut off time: the tester does not operate for 30 minutes
    • Packing: 30pcs/ctn, ctn size: 49*45*46cm, GW: 22.0kgs