被动无钥匙进入 (PKE)

接近那辆车，它将自动解锁。2.5 米离开的汽车远去，它会被自动锁定。如果一扇门未关闭好，它会提醒司机按喇叭，然后闪烁。

按下按钮来启动汽车

上车，踩刹车，按下按钮，将开始的车。踩刹车，然后按住的按钮再次发动机将被停止。

遥控启动

按遥控器要发动这辆车上的 LIGHT'button。通常情况下，它用来使空调器在开车前工作。

智能防盗锁止

系统武器/自动解除锁定 / 解锁的时候。武装状态，如果这辆车震惊或一扇门被打开硬，该系统将通过汽车喇叭报警，并把一盏灯。同时，该系统将切断石油供应的车来防止被偷。

Windows AfterLocking 可以自动关闭

一些车辆直接; 支持此功能一些需要安装窗口更密切。

靠近窗口: 电气装置，可以驱动窗口电机通过检测锁定信号关闭窗口。它是独立的;不需要连接与我们的产品。

使用遥控器来找到你的车

按 LOCK'button，使车测深和光闪烁;这可以帮助您快速找到您的汽车。

使用远程打开汽车后备箱 (needmotor 驾驶树干)

按一段时间，系统将打开后备箱的行李箱按钮。

使用遥控器来暂停 PKE 功能

按 LOCK'and 光按钮一起暂停 PKE 节，自动功能将 bedisabled。再次按下这两个按钮，将激活 PKE。

自动暂停 PKE

如果这辆车被独自一人离开了超过 24 小时，系统将停止寻找智能钥匙自动以降低电耗。

锁定第一制动 (可选)

车启动后，系统将锁车门。当汽车电源关闭时，系统会自动解锁车门。

正如很多汽车已经这种函数，此函数可以抵消侧面的主要单元开关。

规格

主要单位工作电压: DC 9.0 v-18.0 v
主要单位待机电流: (的 =30mA@12V

LF 检测距离: 2 米

智能钥匙工作电压: 直流 2.0 v ~ 4.0 v 直流

智能关键的待机电流: (的 =4uA@3V

工作温度:-40-+ 85 ℃

遥控距离: 30 米

Passive Keyless Entry (PKE)

Approach the car, it will be unlocked automatically. Leave the car away 2.5 meters, it will be locked automatically. If one of the doors was not closed well, it will remind the driver by the horn sounding and turn light flashing.

Push the button to start the car

Get on, step on the brake and push the button, the car will be started. Step on the brake and push the button again the engine will be stopped.

Remote Engine Start

Press the LIGHT'button on the remote to start the car. Normally, it is used to make the air conditioner working before driving.

Smart Alarm &Immobilizer

The system arms/ disarms automatically when locking/ unlocking. On arming status, if the car was shocked or one of the doors was opened forcedly, the system will alarm through the car horn and turn light. At the same time, the system will cut off the oil supply of the car to prevent it from stealing.

Windows Can Be Closed Automatically AfterLocking

Some vehicles support this function directly; some need to be installed a Window Closer.

Window Closer: an electrical device which can drive the window motors to close windows by detecting LOCKING signal. It works independently; don't need to connect with our product.

Use the remote to find your car

Press the LOCK'button to make the car sounding and light flashing; this can help you find your car fast.

Use the remote to open car trunk (needmotor-driving trunk)

Press the TRUNK button for a while the system will open the trunk.

Use the remote to suspend PKE function

Press the LOCK'and LIGHT button together to suspend PKE section, automatic functions will bedisabled. Press that two buttons again, PKE will be activated.

Suspending PKE automatically

If the car has been left alone for more than 24 hours, the system will stop finding smart key automatically to decrease electricity consumption.

Locking on First Braking (selectable)

After the car is started, the system will lock car doors. When the car power is turned off, the system will unlock car doors automatically.

As many cars have this kind of function already, this function can be cancelled by the switch on the side of the main unit.

Specifications

Main Unit Working Voltage: DC 9.0V-18.0V
Main Unit Standby Current: (=30mA@12V

LF Detecting Distance: 2m

Smart Key Working Voltage: DC 2.0V~DC 4.0V

Smart Key Standby Current: (=4uA@3V

Working Temperature: -40-+85 Centigrade

Remote Control Distance: 30m