供应管道防爆波纹阻火器/ 管道防爆阻火器/ 波纹管道防爆防火器/ 厂家直销ZGB-I型铸钢油罐波纹管阻火器, 管道阻火器是应用火焰通过热导体的狭小孔隙时, 由于热量损失而熄灭的原理设计制造. 适用于可燃气体管道, 如汽油, 煤油, 轻柴油, 笨, 甲笨, 原油等油品的储灌或火炬系统, 气体净化通化系统, 气体分析系统, 煤矿瓦斯排放系统, 加热炉燃料气的管网上, 也可用在乙炔, 氧气, 氮气, 天然气的管道用品. 北京景辰时代石化设备有限公司 (http: //www.bjctime.com) 专业 生产 (波纹型, 管道型, 抽屉型, 氧气, 氢气, 沼气, 煤气, 夹套, 网型) 阻火器.

管道阻火器是用来阻止易燃气体, 液体的火焰蔓延和防止回火而引起爆炸的安全装置. 通常用在一下场合:

Flame arrestor is a safety device which shell be used in preventing combustion in pipe Generally F. A. is installed in pipe for running or vent pipe

(1) 输送易燃和可燃气体的管道; Combustible gas pipe

(2) 储存石油及石油产品的油罐; Oilcan With deposited petroleum

(3) 有爆炸危险系统的通风管口; Vent pipe

(4) 油气回收系统; Oil gas recovery system

(5) 去回热炉燃烧气体的管网; Combustible gas net

(6) 内燃机排气系统; Exhaust of internal-combustion engine

(7) 火炬系统; Torch assembly system

主要技术参数:

Main technical parameters:

适用于: 储存闪点低于60℃的石油化工产品, 如汽油, 煤油, 轻柴油, 甲苯等.

Shall be set in the roof of vertical tanks which store first-class oils whose flash points are lower than60℃. 工作温度≤480℃

Operating Temperature: ≤480℃.

壳体材质: 碳钢, 铝合金, 不锈钢: SUS304, SUS304L, SUS316, SUS316L.

Body Material: A3, A1umium, SS: SUS304, SUS304L, SUS316, SUS316L.

阻火芯件材质: 不锈钢波纹板.

Fire Arresting trim Material: SS corrugated plate.

防爆级别: BS5501: IIA, IIB, IIC.

Flame arrester grade: BS5501: IIA , IIB, IIC.

制造, 检测标准: 按GB5908-86标准执.

Manufacture and test are in accordance with GB5908-86.

法兰标准: HG20594-97 PN1.0如客户需用GB, SH, HGJ, JB, ANSI, JIS等标准或改变压力等级时, 请在订货合同中注明.

Flanges or the valve are in accordance with HG20594-97 PN1.0 When GB, SH, HGJ, JB, ANSI, JIS, If changed, buyer shall illustrate in the contract.