LiFePO4 12V 50Ah Battery Pack for EV
LiFePO4 12V 50Ah电池组
主要特点
1.更长的循环寿命：比铅酸电池提高20倍的循环寿命和5倍的浮子/日历寿命，有助于最大限度地降低重置成本，降低总体拥有成本。
2.轻量：约40％的可比铅酸电池的重量。替代铅酸电池。
3.更高的功率：提供铅酸电池的两倍功率，甚至高放电率，同时保持高能量容量。
4.更宽的温度范围：-20℃〜60℃。
5.卓越的安全性：磷酸铁锂化学消除了由于高冲击，过充电或短路情况而导致的爆炸或燃烧的风险。
6.增加灵活性：模块化设计允许最多同时部署四个串联的电池和多达十个电池。
规格
标称电压：12.8V
额定容量：50Ah
循环寿命：> 1000循环@ 1.0C 100％DOD
月自动放电： < 3%
充电效率：100％@ 0。 2C
放电效率：96〜99％@ 0.5℃
充电电压：14.6±0。 1V
充电模式：0.2C至14.6V，然后14.6V，充电电流至0.02C（CC / CV）
充电电流：10A
最大。充电电流：50A
充电截止电压：15.2V±0。 2
连续电流：10A
最大连续放电电流：50A
放电截止电压：10.0V
充电温度：0℃至45℃（32°F至113°F），相对湿度为60±25％
放电温度：-20℃至60℃（-4F至140F）@ 60±25％相对湿度
储存温度：0℃至40℃（32F至104F）@ 60±25％相对湿度
防水防尘：IP21
电池和方法：3.2V 25Ah LiFePO4电池，4S2P
外壳材质：PVC
尺寸（英寸/mm）：240 * 195 * 80mm（9.45'* 7.68'* 3.15英寸）
重量（磅/千克）：约5.5Kg（12.13磅）
重量比能量：116WH / KG
bms
1.过充电检测功能
2.过放电检测功能
3.过流检测功能
4.温度保护
5.短路检测功能
6.平衡功能
应用
电动汽车，电动汽车
2.太阳能/风能存储系统
3. UPS，备用电源
4.电信
5.医疗设备
6.照明
1.更长的循环寿命：比铅酸电池提高20倍的循环寿命和5倍的浮子/日历寿命，有助于最大限度地降低重置成本，降低总体拥有成本。
2.轻量：约40％的可比铅酸电池的重量。替代铅酸电池。
3.更高的功率：提供铅酸电池的两倍功率，甚至高放电率，同时保持高能量容量。
4.更宽的温度范围：-20℃〜60℃。
5.卓越的安全性：磷酸铁锂化学消除了由于高冲击，过充电或短路情况而导致的爆炸或燃烧的风险。
6.增加灵活性：模块化设计允许最多同时部署四个串联的电池和多达十个电池。
规格
标称电压：12.8V
额定容量：50Ah
循环寿命：> 1000循环@ 1.0C 100％DOD
月自动放电： < 3%
充电效率：100％@ 0。 2C
放电效率：96〜99％@ 0.5℃
充电电压：14.6±0。 1V
充电模式：0.2C至14.6V，然后14.6V，充电电流至0.02C（CC / CV）
充电电流：10A
最大。充电电流：50A
充电截止电压：15.2V±0。 2
连续电流：10A
最大连续放电电流：50A
放电截止电压：10.0V
充电温度：0℃至45℃（32°F至113°F），相对湿度为60±25％
放电温度：-20℃至60℃（-4F至140F）@ 60±25％相对湿度
储存温度：0℃至40℃（32F至104F）@ 60±25％相对湿度
防水防尘：IP21
电池和方法：3.2V 25Ah LiFePO4电池，4S2P
外壳材质：PVC
尺寸（英寸/mm）：240 * 195 * 80mm（9.45'* 7.68'* 3.15英寸）
重量（磅/千克）：约5.5Kg（12.13磅）
重量比能量：116WH / KG
bms
1.过充电检测功能
2.过放电检测功能
3.过流检测功能
4.温度保护
5.短路检测功能
6.平衡功能
应用
电动汽车，电动汽车
2.太阳能/风能存储系统
3. UPS，备用电源
4.电信
5.医疗设备
6.照明
Main features
1. Longer cycle life: Offers up to 20times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
2. Lighter weight: About 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries.
3. Higher power: Delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
4. Wider temperature range: -20℃~60℃.
5. Superior safety: Lithium iron phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging or short circuit situation.
6. Increased flexibility: Modular design enables deployment of up to four batteries in series and up to ten battery in parallel.
Specifications
Nominal voltage: 12.8V
Nominal capacity: 50Ah
Cycle life: ﹥ 2000cycles @1.0C 100%DOD
Months self-discharge: < 3%
Efficiency of charge: 100%@0. 2C
Efficiency of discharge: 96~99%@0.5C
Charge voltage: 14.6±0. 1V
Charge mode: 0.2C to 14.6V, then 14.6V, charge current to 0.02C (CC/CV)
Charge current:10A
Max. charge current: 50A
Charge cut-off voltage: 15.2V±0. 2
Continuous current: 10A
Max continuous discharge current: 50A
Discharge cut-off voltage: 10.0V
Charge temperature: 0 ℃ to 45 ℃ (32F to 113F) @60±25% relative humidity
Discharge temperature: -20 ℃ to 60 ℃ (-4F to 140F) @60±25% relative humidity
Storage temperature: 0 ℃ to 40 ℃ (32F to 104F) @60±25% relative humidity
Water dust resistance: IP21
Cell & method: 3.2V 25Ah LiFePO4 Cell, 4S2P
Shell material: PVC
Dimensions (in./mm.): 240*195*80mm(9.45'*7.68'*3.15Ins)
Weight (lbs./kg.): Approx:5.5Kg(12.13Ibs)
Gravimetric specific energy: 116WH/KG
BMS
1. Overcharge detection function
2. Over discharge detection function
3. Over current detection function
4. Temperature protection
5. Short detection function
6. Balance function
Application
1. Electric vehicles, electric mobility
2. Solar/wind energy storage system
3. UPS, backup power
4. Telecommunication
5. Medical equipment
6. Lighting
1. Longer cycle life: Offers up to 20times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
2. Lighter weight: About 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries.
3. Higher power: Delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
4. Wider temperature range: -20℃~60℃.
5. Superior safety: Lithium iron phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging or short circuit situation.
6. Increased flexibility: Modular design enables deployment of up to four batteries in series and up to ten battery in parallel.
Specifications
Nominal voltage: 12.8V
Nominal capacity: 50Ah
Cycle life: ﹥ 2000cycles @1.0C 100%DOD
Months self-discharge: < 3%
Efficiency of charge: 100%@0. 2C
Efficiency of discharge: 96~99%@0.5C
Charge voltage: 14.6±0. 1V
Charge mode: 0.2C to 14.6V, then 14.6V, charge current to 0.02C (CC/CV)
Charge current:10A
Max. charge current: 50A
Charge cut-off voltage: 15.2V±0. 2
Continuous current: 10A
Max continuous discharge current: 50A
Discharge cut-off voltage: 10.0V
Charge temperature: 0 ℃ to 45 ℃ (32F to 113F) @60±25% relative humidity
Discharge temperature: -20 ℃ to 60 ℃ (-4F to 140F) @60±25% relative humidity
Storage temperature: 0 ℃ to 40 ℃ (32F to 104F) @60±25% relative humidity
Water dust resistance: IP21
Cell & method: 3.2V 25Ah LiFePO4 Cell, 4S2P
Shell material: PVC
Dimensions (in./mm.): 240*195*80mm(9.45'*7.68'*3.15Ins)
Weight (lbs./kg.): Approx:5.5Kg(12.13Ibs)
Gravimetric specific energy: 116WH/KG
BMS
1. Overcharge detection function
2. Over discharge detection function
3. Over current detection function
4. Temperature protection
5. Short detection function
6. Balance function
Application
1. Electric vehicles, electric mobility
2. Solar/wind energy storage system
3. UPS, backup power
4. Telecommunication
5. Medical equipment
6. Lighting
