电缆终端 电缆终端被用在程序中，样品，并根据IEC 60840（30-150kV），IEC 62067（150-550kV），IEC 60060-1，IEC 60060-2和IEC塑料绝缘介质和高压电缆的类型的测试 60270它们充当测试对象和高压测试系统之间的连接。
有两种模式的使用取决于电缆的测试电压不同的技术电缆终端进行测试。
油终端系统，用于测试中压电缆的高达100千伏的测试电压。
水终止系统用于与测试电压范围为75千伏至800千伏测试中，高压电缆。 除了水的终端，他们配备了水空调机组。 当测试电缆时，系统提取所产生的热损失经由封闭水回路，并在同一时间，监视电阻应力分级机介质的导电性。 应用 电缆端接系统.pdf - AC测试
- 冲击电压试验
- 局部放电（PD）的测量
- 损耗因数测量
- 常规，样品，和型式试验
工程 | Cable terminations Cable terminations are used in routine, sample, and type testing of plastic-insulated medium and high voltage cables according to IEC 60840 (30-150kV) , IEC 62067 (150-550kV) , IEC 60060-1, IEC 60060-2 and IEC 60270. They act as the connection between the test object and the high voltage test system.
There are two models of cable terminations using different techniques depending on the test voltage of the cables to be tested.
Oil termination systems are used to test medium voltage cables with test voltages of up to 100 kV.
Water termination systems are used to test medium and high voltage cables with test voltages ranging from 75 kV to 800 kV. In addition to the water terminations they feature a water conditioning unit. When testing cables, the system extracts the produced heat losses via a closed water circuit and at the same time, monitors the conductivity of the resistive stress grader medium. Applications Cable Termination System.pdf - AC testing
- Impulse voltage testing
- Partial discharge (PD) measurements
- Loss factor measurements
- Routine, sample, and type testing
Projects | 
