高强度雷蒙磨粉机
本机适用于磨削重晶石，石灰石，高岭土，cerames和炉渣等，下面的莫氏硬度和280多名各种非易燃非易爆的东西，在开采行业，冶金行业，化工规模9.3 工程建筑物料的高细制粉加工。 该产品大小可调，在80-425的范围内（1000最好的）网格。 是可能的产品30-80通过在机器特殊装置目的粗粉。

工作过程：
在主框架，一100-1500公斤供电压力弹簧被固定到辊吊杆。 研磨机将生效之后，辊子绕所述主轴，并且辊紧紧靠在环由高压弹簧和离心力加压。 和其轧制压力比大于相同功率条件和产量下的雷蒙德磨床升高到相当大的程度更高的1.2倍。
当一定程度的滚子和环的磨损是有效时，建议调整弹簧的长度以保持辊与环之间的恒定压力。 其结果是，稳定的输出和纤度被确保。

高强度雷蒙磨粉机的技术参数

High-strength Raymond mill
The machine is used for grinding the barite, limestone, kaolin, cerames, and slags, etc, below scale 9.3 of Mohs hardness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgical industrial, chemical engineering and building material for high fine powder generation and processing. The product size is adjustable in the range of 80-425 (1000 the finest) meshes. It is possible to product 30-80 mesh coarse powder through special device in the machine.

Working process:
In the main frame, a 100-1500 kg powered pressure spring is fixed to the roller suspender. After the grinder putting into effect, the roller rotates around the main shaft, and rolls closely against the ring pressed by the high pressure spring and centrifugal force. And its rolling pressure ration is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree.
When a certain degree of wear of roller and ring is effected, it is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, the stable output and fineness are ensured.

Technical parameters of High-strength Raymond mill