应用

锤式破碎机也称锤式粉碎机。 锤式破碎机，主要用于破碎中硬性或脆性材料具有硬度不大于300MPa的更多和15％水分，如重晶石，石灰石，水磨石，硅砂石，煤，焦炭，石膏，硫酸铝，炉渣，盐，白垩， 块，水泥，矾，砖，瓦等，它具有结构简单，破碎比大，生产效率高，产品粒度均匀等。锤式破碎机是面向中级和细碎脆性的主要设备之一的功能 材料少于中间如石灰石煤和其他用于冶金，建材，化工和水 - 电力行业，具有破碎比大，甚至产品粒度的特征。 和锤式破碎机可以粉碎材料不同大小分成相等粒子，这有利于下一个过程。 在PC锤式破碎机（锤式粉碎机）为干湿脆性，中硬的材料用于采矿，水泥，煤炭，冶金，建材，公路建设，石油和化工行业的破碎的开发工作。 这种破碎机机可还用于破碎芯片和纸纤维结构和强的弹性和延展性，或回收石棉纤维通过破碎石棉水泥等峡废料之间的光栅是可调，以改变放电的晶粒尺寸。

河南红星是一家高科技企业，专门从事研究，生产的耐磨材料和粉碎工程技术产品。 随着破碎，研磨，筛分设备的完整产品线，我们有信心，我们可以为您提供最专业的服务，为你所需要的。

锤式破碎机的工作原理

锤式破碎机的主要工作部件是转子锤。 转子由主轴，圆盘，销轴和锤子。 电动机带动转子在破碎腔内快速旋转。 原料通过进料口进入破碎机，并欲绝，冲击，剪切和地面的高速锤体积小。 有转子下一个屏蔽板，使材料具有尺寸比筛网小将被筛选出来，其他都留给进一步锤和研磨直至达到的标准尺寸。 最终产品的尺寸可以通过改变屏蔽板进行调节。 转子和筛板之间的间隙，也可以根据不同的需求调整。

不仅可在锤式破碎机中破碎的生产线和制砂的生产线被应用，但它也将替换选矿生产线的圆锥​​破碎机。 由于其卓越的品质和可靠的服务，河南红星产品已大批量出口到75个国家和地区，如蒙古，越南，法国，德国，马来西亚，土耳其，中东，非洲等。

Application

The hammer crusher also named hammer mill. Hammer Crusher is mainly used for crushing medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture such as barite, limestone, terrazzo, silica sand stone, coal, coke, gypsum, aluminum sulfate, slag, salt, chalk, blocks, cement, alumen, brick, tile, etc. It has the features of simple structure, big crushing ratio, high production efficiency, uniform particle size, etc. The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess. And hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure. The PC hammer crusher (hammer mill) were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. This crusher machine can be also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings are adjustable to change grain size of the discharge.

Henan Hongxing is a high-tech enterprise, which specializes in researching and producing wear resistant materials and crushing engineering products. With a complete line of crushing, grinding and screening equipments, we are confident we can provide you the most professional service for what you need.

Working Principle of hammer crusher

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Not only can the hammer crusher be applied in crushing production line and sand making production line, but it also replaces the cone crusher in beneficiation production line. Due to their superior quality and dependable service, Henan Hongxing products have been exported in large quantities to over 75 countries and regions such as Mongolia, Vietnam, France, Germany, Malaysia, Turkey, Middle East, Africa, etc.