Hammer crusher

锤式破碎机

议价

译文
原文

锤式破碎机简介

锤式破碎机（锤式粉碎机）适用各种硬而脆的材料，如石灰石，煤，盐，石膏，矾，砖瓦等材料的破碎抗压强度不应超过150MPA的。锤式破碎机主要用于行业，如水泥，选煤，发电，建材及复合肥等。而锤式破碎机可粉碎物料不同大小分成相等的颗粒，这有利于下道工序。锤式破碎机的优点是可靠的机械结构，高生产率和良好的适用性。

锤式破碎机的工作原理

在锤式研磨机，马达驱动转子在通过皮带以高速旋转，并且在转子有系列锤。当物料进入锤的工作区域中，旋转锤具有高旋转速度的破碎它们; 满足所要求的尺寸的压碎的产物可以通过所述出口被排出，并成为最终产品; 大尺寸的产品被带回到破碎区域由锤子用于被重新粉碎，直到它们到达所需大小。

单段锤式破碎机的优点是如下

1.大减速比：最大给料粒度为1.3-1.5m; 3-150mm放电的大小。

2.高细度放电的大小：与集料良好的形状，所述粉末材料是不超过20％。

3.简单的过程：二，三段破碎被还原成单级。

4.经济性：匹配马达，这大大降低了生产成本的小容量。

技术指标	进料粒度（毫米）	出料粒度（毫米）	容量（立方米/小时）	马达功率（kw）	总重量（t）	尺寸（长宽高）（mm）
PCΦ400* 300	≤200	≤25	5-10	11	0.8	900670860
PCΦ600* 400	≤250	≤30	10-22	22	2.26	120010501200
PCΦ800* 600	≤250	≤35	18-40	55	4.8	131011801310
PCΦ1000* 800	≤350	≤35	25-50	75	5.9	160013901575
PCΦ1000* 1000	≤350	≤35	30-55	90	8	180015901775
PCΦ1250* 1250	≤350	≤35	35-65	132	14	206016001890
PCΦ1400* 1400	≤350	≤35	50-100	280	32	236518702220
PCΦ1600* 1600	≤350	≤35	100-150	480	37.5	305028502800

Profile of Hammer crusher

Hammer crusher (hammer mill) is applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. The crushing compressive strength of materials should not be in excess of 150Mpa. Hammer crusher is mainly used in industries such as cement, coal separation, electricity generation, building materials and compound fertilizer, etc. And hammer crusher can crush materials with different sizes into equal particle, which favors the next procedure. The advantages of hammer crusher are reliable mechanical structure, high productivity and favorable applicability.

Operating principle of Hammer crusher

In the hammer mill machine, the motor drives the rotor to rotate at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them; the crushed products meeting the required size can be discharged by the outlet and become the final products; the large size products are brought back to the crushing area by the hammers for being re-crushed until they reach the required size.

Advantages of Single-stage hammer crusher are as follow

1. Big reduction ratio: maximum feeding size is 1.3-1.5m; 3-150mm of discharging size.

2. High fineness of discharging size: favorable shape with aggregate, the powdery material is no more than 20%.

3. Simple process: the two or three stage crushing is reduced into single stage.

4. Economical: small capacity of matched motor, which greatly reduces the production cost.

Specifications	Feeding Size (mm)	Discharging size (mm)	Capacity (m3/ h)	Motor Power (kw)	Total weight (t)	Dimensions (LWH) (mm)
PCΦ400*300	≤200	≤25	5-10	11	0.8	900670860
PCΦ600*400	≤250	≤30	10-22	22	2.26	120010501200
PCΦ800*600	≤250	≤35	18-40	55	4.8	131011801310
PCΦ1000*800	≤350	≤35	25-50	75	5.9	160013901575
PCΦ1000*1000	≤350	≤35	30-55	90	8	180015901775
PCΦ1250*1250	≤350	≤35	35-65	132	14	206016001890
PCΦ1400*1400	≤350	≤35	50-100	280	32	236518702220
PCΦ1600*1600	≤350	≤35	100-150	480	37.5	305028502800