Belt conveyor
皮带传输机
议价
加入意向皮带输送机简介
带式输送机（皮带输送机）是物资运输机器，其输送的一定行的物资。 输送带也可以被命名为连续输送。 在皮带输送机可携带横，斜向和竖向输送，也可以由成空间输送线。 该输送线一般是固定的。 胶带输送机的输送能力大，输送距离长。 皮带输送机也可以完成在输送过程中的几个技术操作，因此被广泛应用于各种行业。
输送机主要有以下类型：皮带输送机，板式输送机，刮板输送机，斗式输送机，悬挂链输送等。
皮带输送机的技术参数
| 皮带宽度（mm） | 输送长度（m） 功率（kw） | 输送速度（m / s）的 | 输送量（T / H） | ||
| 500 | (=12 3 | 12-20 4-5.5 | 20-30 5.5-7.5 | 1.3-1.6 | 78-191 |
| 650 | (=12 4 | 12-20 5.5 | 20-30 7.5-11 | 1.3-1.6 | 131-323 |
| 800 | (=6 4 | 6-15 5.5 | 15-30 7.5-15 | 1.3-1.6 | 278-546 |
| 1000 | (=10 5.5 | 10-20 7.5-11 | 20-40 11-22 | 1.3-2.0 | 435-853 |
| 1200 | (=10 7.5 | 10-20 11 | 20-40 15-30 | 1.3-2.0 | 655-1284 |
| 1400 | (=10 11 | 10-20 18.5 | 20-40 22-37 | 1.3-2.0 | 893-1745 |
| 1600 | (=10 15 | 10-20 22 | 20-40 30-45 | 1.3-2.0 | 1069-2195 |
附件：
1.输送量由以下条件计算出：材料密度在1.0吨/米3 -1.6t /平方米3 ; 输送带倾角小于18o 并且材料储存角为30o.
2.密度材料的小于2.5吨/米3.
3.传送长度不限于形式; 不同的长度可根据客户的要求进行生产。
Introduction of Belt conveyor
Belt conveyor (Belt conveyer) is the materiel transporting machine which transports the materiel in a certain line. Conveyor belt also can be named continuous conveyor. The Belt conveyor can carry horizontal, oblique and vertical transporting and also can be composed into a space conveying line. This conveying line generally is fixed. The Belt conveyor's conveying ability is big and conveying distance is long. Belt conveyor also can complete several technological operations in the conveying process, so it is widely used in all kinds of industry.
The conveyor mainly has the following type: Belt conveyor, Plate conveyor, Scraper conveyor, Bucket conveyor, Overhead chain conveyor, etc.
Technical parameters of belt conveyor
| Belt width (mm) | Conveying length (m) Power (kw) | Conveying speed (m/ s) | Conveying amount (t/ h) | ||
| 500 | (=12 3 | 12-20 4-5.5 | 20-30 5.5-7.5 | 1.3-1.6 | 78-191 |
| 650 | (=12 4 | 12-20 5.5 | 20-30 7.5-11 | 1.3-1.6 | 131-323 |
| 800 | (=6 4 | 6-15 5.5 | 15-30 7.5-15 | 1.3-1.6 | 278-546 |
| 1000 | (=10 5.5 | 10-20 7.5-11 | 20-40 11-22 | 1.3-2.0 | 435-853 |
| 1200 | (=10 7.5 | 10-20 11 | 20-40 15-30 | 1.3-2.0 | 655-1284 |
| 1400 | (=10 11 | 10-20 18.5 | 20-40 22-37 | 1.3-2.0 | 893-1745 |
| 1600 | (=10 15 | 10-20 22 | 20-40 30-45 | 1.3-2.0 | 1069-2195 |
Accessory:
1. The conveying quantity is worked out by the following conditions: material density is between 1.0t/ m3-1.6t/ m3; conveyor obliquity is less than 18o and the material stockpile angle is 30o.
2. Density of material is less than 2.5t/ m3.
3. The conveying length is not restricted to the form; different length can be manufactured according to customers demands.
