介绍冷却机：

冷却机 主要用于建材，冶金，化工等行业，水泥行业，酷矿渣，石灰石，煤黏土，精细化学品，也可用于复合肥生产线。

转鼓冷却器：

1.转鼓冷却器适用于65-85干燥复合肥补平衡和连轧停机坪充分与冷空气接触和降温的精心设计的内部结构，使产品包装及时，接近常温 防止结块的仓储运输。

2.散热方式采用了凉爽的风，它利用引风机取出冷空气从设备的末端，使其与材料相反，阴凉强制为了在接触设备的馈入部分反 降低材料的温度快速。

3.这是复合肥生产完美的散热设备，为良好的散热效果，高输出，操作方便。

转鼓冷却器的应用：

1.专门冷却器设计处理高温产品给1600oC也可以提供。

2.技术特别适合于涉及冷却热材料从700℃至环境温度的5-10oC应用程序。

3.热工艺材料被引入一个旋转圆筒的一端，其中它被提升关于航班经冷却空气流固定在气缸的ID和喷淋。

4.空气通过虽然气缸逆流到材料，从而提供最有效的传热和最冷产品温度。

5.在特殊情况下，该空气用于冷却machinecan冷藏于从空气中除去水分或冷却到低于环境温度的产品。

没有！

Introduction to Cooling Machine:

Cooling machine is mainly used for building materials, metallurgy, chemical industry, cement industry, cool slag, limestone, coal clay, fine chemicals, also be used for fertilizer production lines.

Rotary Drum Cooler:

1. Rotary drum cooler is suitable for dried compound fertilizer of 65-85 makes up of balancing and continuous mill apron to contact with cool air adequately and cool off to approach normal temperature by the well-designed inner structure, which makes products packed timely and prevent caking in storage transportation.

2. The cooling method adopts backwash of cool wind, which utilizes induced-draft fan to take out the cool air from the end of equipment and make it contact with material conversely and cool compulsorily at the feed-in part of the equipment in order to reduce the temperature of the material rapidly.

3. It is the perfect cooling equipment of compound fertilizer production, for the good cooling effect, high-output and convenient operation.

The Application of Rotary Drum Cooler:

1. Specialized cooler designs handling high temperature products to 1600oC can also be provided.

2. The technology is particularly suited for applications involving cooling hot materials from 700oC to 5-10oC of the ambient air temperature.

3. The hot process material is introduced into one end of a rotating cylinder where it is lifted on flights secured to the ID of the cylinder and showered through the cooling air stream.

4. The air passes though the cylinder countercurrent to the material, thus providing the most efficient heat transfer and coolest product temperature.

5. In special cases, the air for cooling machinecan be refrigerated to remove moisture from the air or to cool the product below ambient temperature.

NO!