Dryer

Dryer

烘干机

议价

加入意向

回转烘干机应用

回转烘干机 可广泛用于干燥各种材料，如金属和非金属矿物，粘土在水泥工业和煤炭在煤矿等，并且它是很容易掌握处理的措施。 中国是大国制造机之一，也是世界上最好的生产商。 尤其是河南红星矿山机器有限公司是在那些公司在中国制造机的畅销书之一。 作为一家专业生产厂家，具有多年的矿山机械的经历，河南红星矿山机器有限公司可以生产和供应各种烘干机，如 回转烘干机，石灰石机，滚筒干燥机，水泥回转烘干机 等等。

优势与旋转式干燥机的好处

合理的设计; 高效率; 低功耗，能耗; 维护方便; 操作方便; 交货快捷; 结构坚固; 成熟的设计; 定制每一个应用程序; 最优惠的价格在市场上。

工作原理

材料通过皮带输送机或斗式提升机发送到旋转干燥器的料斗，材料输入与坡度横线从高侧安装筒，并热空气进入从下侧的桶，然后材料和热空气混合在一起。 材料去到下侧靠重力当枪管转动。 为了筒升降机材料上下内侧上升降器，使材料和热空气混合完全，其目的是提高旋转干燥器的制造效率。

结论：

回转烘干机 是用于选矿等行业物料烘干湿度或粒度，建材，冶金，化工等。 旋转干燥器可用于干燥多种材料以方便和可靠的操作; 因此，它已被广泛地应用于上述这些行业。

H系列回转烘干机技术参数

规格。/平方米
（直径*长度） 		壳牌容积
(m³) 		容量
（吨/小时） 		安装
倾角
(%) 		最高入口
气温
(℃) 		主电机
（KW） 		重量
(t)
Φ1.2*8.0 9.0 1.9 ~ 2.4 3 ~ 5 700 ~ 800 7.5 9
Φ1.2*10 11.3 2.4 ~ 3.0 3 ~ 5 700 ~ 800 7.5 11
Φ1.5*12 21.2 4.5 ~ 5.7 3 ~ 5 700 ~ 800 15 18.5
Φ1.5*14 24.7 5.3 ~ 6.6 3 ~ 5 700 ~ 800 15 19.7
Φ1.5*15 26.5 5.7 ~ 7.1 3 ~ 5 700 ~ 800 15 20.5
Φ1.8*12 30.5 6.5 ~ 8.1 3 ~ 5 700 ~ 800 18.5 21.5
Φ1.8*14 35.6 7.6 ~ 9.5 3 ~ 5 700 ~ 800 18.5 23
Φ2.2*12 45.6 9.7 ~ 12.2 3 ~ 5 700 ~ 800 22 33.5
Φ2.2*14 53.2 11.4 ~ 14.2 3 ~ 5 700 ~ 800 22 36
Φ2.2*16 60.8 13.0 ~ 16.2 3 ~ 5 700 ~ 800 22 38
Φ2.4*14 63.3 13.5 ~ 16.9 3 ~ 5 700 ~ 800 37 45
Φ2.4*18 81.4 17.4 ~ 21.7 3 ~ 5 700 ~ 800 37 49
Φ2.4*20 90.4 19.3 ~ 24.1 3 ~ 5 700 ~ 800 45 54
Φ2.4*22 99.5 21.2 ~ 26.5 3 ~ 5 700 ~ 800 45 58
Φ2.6*24 127.4 27.2 ~ 34.0 3 ~ 5 700 ~ 800 55 73
Φ3.0*20 141.3 30.1 ~ 37.7 3 ~ 5 700 ~ 800 75 85
Φ3.0*25 176.6 37.7 ~ 47.1 3 ~ 5 700 ~ 800 75 95
Φ3.2*25 201 42.9 ~ 53.6 3 ~ 5 700 ~ 800 90 110
Φ3.6*28 285 60.8 ~ 76.0 3 ~ 5 700 ~ 800 160 135

间接传热烘干机性能特点：

我公司生产的间接传热烘干机主要用于建材，冶金，为矿渣石灰石，煤粉，矿渣，粘土烘干石水泥厂。 此机是由旋转体构成，提升刀片，驱动装置，支撑装置及密封圈。 本机具有结构合理，效率高，能耗低，交通便利的优势。

间接传热烘干机技术参数

项目
外壳直径*壳长		 内部外壳的直径（mm） 内部内壳的直径（mm） 壳长
m		 壳牌容积
m3		 壳牌Obli-quity 提升刀片式 最高进气Tem.oC 尺寸
Ø1.5*15m
Ø1.5*17m
Ø1.5*19m		 1500 500 15
17
19		 20.27
22.97
25.68		 3-5% 升降形式 850 16.2*2.7*2.7
18.2*2.7*2.7
20.0*2.9*2.9
Ø1.8*21m
Ø1.8*23m
Ø1.8*25m		 1800 650 21
23
25		 35.91
39.33
42.75		 3-5% 升降形式 850 22.5*2.7*2.7
24.5*2.9*2.9
26.5*2.9*2.9
Ø2.2*21m
Ø2.2*23m
Ø2.2*25m		 2200 800 21
23
25		 58.10
63.61
69.15		 3-5% 升降形式 850 -

Application of Rotary Dryer

Rotary dryers can be widely used to dry various materials, such as metallic and nonmetallic mineral, clay in cement industry and coal in coal mine, etc, and it is quite easy to master the process measures. China is one of the major countries manufacturing dryer and is also the best producer in the world. Especially Henan Hongxing Mining Machinery Co. , Ltd. is one of the best sellers in those companies manufacturing dryer in China. As a professional manufacturer with many years experiences on mining machinery, Henan Hongxing Mining Machinery Co. , Ltd. can produce and supply all kinds of dryer machines, such as Rotary dryer, Limestone dryer, Drum dryer, Cement rotating dryer and so on.

Advantages and Benefits of Rotary Dryer

Reasonable design; high-efficiency; low consumption, energy consumption; easy maintenance; easy operation; quick delivery; solid construction; proven design; customized for every application; best price on the market.

Operating Principle

Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator, materials enter the barrel installed with slope to horizontal line from the higher side, and hot air enters the barrel from the lower side, and then materials and hot air mix together. Materials go to the lower side by gravity when the barrel is rotating. Lifters on the inner side of barrel lift materials up and down in order to make materials and hot air mix completely, which is designed to improve the producing efficiency of rotary dryer.

Conclusion:

Rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. Rotating dryers can be used for drying many kinds of materials with convenient and reliable operation; therefore, it has been widely used in those industries above.

Technical parameters of H series rotary dryer

Spec./ m
(Dia.*Length) 		Shell Cubage
(m³) 		Capacity
(t/ h) 		Installation
Obliquity
(%) 		Highest Inlet
Air Temperature
(℃) 		Main Motor
(KW) 		Weight
(t)
Φ1.2*8.0 9.0 1.9 ~ 2.4 3 ~ 5 700 ~ 800 7.5 9
Φ1.2*10 11.3 2.4 ~ 3.0 3 ~ 5 700 ~ 800 7.5 11
Φ1.5*12 21.2 4.5 ~ 5.7 3 ~ 5 700 ~ 800 15 18.5
Φ1.5*14 24.7 5.3 ~ 6.6 3 ~ 5 700 ~ 800 15 19.7
Φ1.5*15 26.5 5.7 ~ 7.1 3 ~ 5 700 ~ 800 15 20.5
Φ1.8*12 30.5 6.5 ~ 8.1 3 ~ 5 700 ~ 800 18.5 21.5
Φ1.8*14 35.6 7.6 ~ 9.5 3 ~ 5 700 ~ 800 18.5 23
Φ2.2*12 45.6 9.7 ~ 12.2 3 ~ 5 700 ~ 800 22 33.5
Φ2.2*14 53.2 11.4 ~ 14.2 3 ~ 5 700 ~ 800 22 36
Φ2.2*16 60.8 13.0 ~ 16.2 3 ~ 5 700 ~ 800 22 38
Φ2.4*14 63.3 13.5 ~ 16.9 3 ~ 5 700 ~ 800 37 45
Φ2.4*18 81.4 17.4 ~ 21.7 3 ~ 5 700 ~ 800 37 49
Φ2.4*20 90.4 19.3 ~ 24.1 3 ~ 5 700 ~ 800 45 54
Φ2.4*22 99.5 21.2 ~ 26.5 3 ~ 5 700 ~ 800 45 58
Φ2.6*24 127.4 27.2 ~ 34.0 3 ~ 5 700 ~ 800 55 73
Φ3.0*20 141.3 30.1 ~ 37.7 3 ~ 5 700 ~ 800 75 85
Φ3.0*25 176.6 37.7 ~ 47.1 3 ~ 5 700 ~ 800 75 95
Φ3.2*25 201 42.9 ~ 53.6 3 ~ 5 700 ~ 800 90 110
Φ3.6*28 285 60.8 ~ 76.0 3 ~ 5 700 ~ 800 160 135

Performance characteristics of Indirect heat transfer dryer:

The indirect heat transfer dryer made by our company is mainly used in building materials, metallurgy, cement plant for drying of limestone slag, coal powder, slag, clay stone. This dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring. The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.

Technical parameters of Indirect heat transfer dryer

Items
Shell diameter *shell length		 Inside diameter of outer shell (mm) Inside diameter of inner shell (mm) Shell length
m		 Shell cubage
m3		 Shell Obli-quity Lifting blade form Highest inlet air Tem.oC Dimensions
Ø1.5*15m
Ø1.5*17m
Ø1.5*19m		 1500 500 15
17
19		 20.27
22.97
25.68		 3-5% Lifting form 850 16.2*2.7*2.7
18.2*2.7*2.7
20.0*2.9*2.9
Ø1.8*21m
Ø1.8*23m
Ø1.8*25m		 1800 650 21
23
25		 35.91
39.33
42.75		 3-5% Lifting form 850 22.5*2.7*2.7
24.5*2.9*2.9
26.5*2.9*2.9
Ø2.2*21m
Ø2.2*23m
Ø2.2*25m		 2200 800 21
23
25		 58.10
63.61
69.15		 3-5% Lifting form 850 -