Impact Crusher

反击式破碎机

议价

加入意向

译文
原文

简介冲击式破碎机

设计处理材料的强度不超过350Mpa。 冲击破碎机 被广泛用于在采矿厂，第一和二级破碎的过程，并且要处理的原料的边长与要由500毫米。

冲击破碎机可以粉碎各种粗，中，细的材料，其尺寸不超过500毫米和粉碎抗压强度不小于350Mpa以上，如花岗岩，石灰石，和混凝土等，这是广泛使用的生产线砂材料的水利水电行业，高速公路行业。

撞击破碎机中的应用

PF系列冲击破碎机是适用于破碎的半硬质材料，并具有大的吞吐量和小粒度的材料。这一系列破碎机可以处理具有100至500mm的边长和压缩强度可以达到350mp和材料的破碎后具有的大减速比和立方形状的优点的材料。

反击式破碎机的工作原理

冲击式破碎机是那种破碎机取决于一斤。当此 矿物冲击式破碎机 作品，由电机驱动时，转子旋转中的高的速度。当物料进入机器，它泵转子的平坦锤，则材料飞向撞击板迅速和泵平坦锤再次，立即将材料被反弹至平锤子的面积。重复此过程不断直到物料达到所需的尺寸和从出口排出。

红星MOBLIE反击式破碎机

红星反击式破碎机是很久以前承认在该领域。它可以与节能高效的优势顺利运作。这一系列破碎机可以处理具有100至500mm的边长和压缩强度可以达到350MPA的材料。然后，材料的破碎后，有大减速比和立方形状的优势。

PF冲击式破碎机：该系列破碎机适用于破碎的半硬质材料，并具有大的吞吐量和小粒度的材料。

模型	规格（mm）	进料尺寸（mm）	最大。馈送侧长度（mm）	生产能力（T / H）	功率（kw）	总重量（t）	外形尺寸（长宽高）（mm）
PF-1007	Ø1000*700	400*730	300	30-70	45	12	233016602300
PF-1010	Ø1000*1050	400*1080	350	50-90	55	15	237017002390
PF-1210	Ø1250*1050	400*1080	350	70-130	110	17.7	268021602800
PF-1214	Ø1250*1400	400*1430	350	100-180	132	22.4	265024602800
PF-1315	Ø1320*1500	860*1520	500	130-250	220	27	318027202620
PF-1520	Ø1500*2000	830*2040	700	300-550	440	50.6	395935643330

Brief introduction of Impact crusher

Designed to handle material with strength not more than 350Mpa. Impact crushing machine is widely used in the first and secondary crushing process at mining plant, and the side length of raw material to be dealt with is up to the 500mm.

The impact crushers can crush various coarse, medium and fine materials, whose size is not in excess of 500mm and crushing compressive strength is not more than 350Mpa, such as granite, limestone, and concrete, etc. It is widely used in the production line of sand materials in the water resources and hydropower industry and expressway industry.

Applications of Impactor Crusher

PF series Impact crushers are applicable for crushing the semi-hard materials and have big throughput and small granularity of materials. This series of crushers can process the material with the side length of 100 to 500mm and the compression strength can reach 350mp and have the advantages of big reduction ratio and cubic shape after the crushing of materials.

Working Theory of Impact Breaker

Impact crushers are the kind of crushing machine which depends on pound. When this mineral impact crusher works, driven by the motor, the rotors revolve in high speed. When the materials get into the machine, it pumps the flat hammers of rotors, then the materials fly to the impact plate rapidly and pumps the flat hammer again, immediately, the materials are rebounded to the area of flat hammers. This process repeats constantly till the materials reach the required size and is discharged from the outlet.

Hongxing Moblie Impact Crusher

Hongxing Impact Crusher is acknowledged in its field long time ago. It can operate smoothly with the advantages of energy saving and high efficiency. This series of crushers can process the material with the side length of 100 to 500mm and the compression strength can reach 350MPA. Then have the advantages of big reduction ratio and cubic shape after the crushing of materials.

PF impact crusher: This series of crushers are applicable for crushing the semi-hard materials and have big throughput and small granularity of materials.

Model	Specification (mm)	Feed Size (mm)	Max. feeding side length (mm)	Capacity (t/ h)	Power (kw)	Total Weight (t)	Dimensions (LWH) (mm)
PF-1007	Ø1000*700	400*730	300	30-70	45	12	233016602300
PF-1010	Ø1000*1050	400*1080	350	50-90	55	15	237017002390
PF-1210	Ø1250*1050	400*1080	350	70-130	110	17.7	268021602800
PF-1214	Ø1250*1400	400*1430	350	100-180	132	22.4	265024602800
PF-1315	Ø1320*1500	860*1520	500	130-250	220	27	318027202620
PF-1520	Ø1500*2000	830*2040	700	300-550	440	50.6	395935643330