AV6471 fusion splicer
AV6471熔接机
议价
加入意向强大的funtcion和超级lowsplicing损失，使其可以胜任forconstruction
干线和FTTX的：都是因为结构紧凑，precisemechanism。
它可以适应execrableenviroment; 新颖的光纤成像systemmake图像更清晰
和exquisiter; 实时嵌入式操作系统提供friendlyman人机界面和丰富的功能。
该储存卡大容量锂Ionbattery可以支持长时间实地考察。 该嵌入式传感器measuredtemperature。
湿度和空气压力供应闭环反馈控制，所以theinstrument可以采用各种恶劣环境和
一致性ofsplicing损失得到了改善。
主要特点：
新fullydigitalized设计;
体积小，重量轻。
只有2.8千克包括电池;
8秒拼接。
25秒HeatShrinking;
关闭防护罩会自动拼接;
关闭加热器，自动加热;
X /被同时显示y轴上。
放大倍数高达304倍;
实时校准系统排出，参数needn T为调整; 8217;
长电极寿命，高达4000倍;
USB andVGA端口;
5.7英寸数字高分辨液晶;
电池容量是在实时显示。 恰恰;
储存卡高容量电池。
220次接续和加热可beeasily; 完成
典型应用：AV6471光纤Splicermainlyappliedtofibercableconstruction，制浆
维修，抢修光缆和光纤设备生产测试。
| 适用光纤 | SMF（ITU-T G. 652），MMF（ITU-T G. 651），DSF（ITU-T G. 653），非零色散位移光纤 |
| 平均接头损耗 | 0.02分贝（SM），0.01分贝（MM）0.04分贝（DS），0.04分贝（NZDS） |
| 回波损耗 | （-60dB |
| 操作模式 | 自动，半自动，手动 |
| 对齐模式 | 先进的PAS对齐方式。 |
| 光纤直径 | 包层直径：80μm~150μm，涂径：100μm~1000μm |
| 切割长度 | 8~16mm（涂层直径（250微米），16毫米（涂径250~1000μm） |
| 放大 | 垂直152times，水平304times。 |
| 图像显示 | 5.7' 640 * 480的LCD。 |
| 拉力测试 | 标准2N（可选）。 |
| 热缩管 | 40毫米，60毫米等一系列微型热缩管的。 |
| 电池容量 | 通常情况下拼接220倍，充电3.5小时值（如果可用充电）。 |
| 电池寿命 | 循环寿命可达300~500倍，可替换。 |
| 电极寿命 | ）4000次，更换 |
| 照明工程 | 内置超级高亮度LED供应方便夜间工作 |
| 港口 | USB，VGA |
| 电源 | 内置11.1V锂离子电池。 AC适配器（输入AC100~240，输出DC13.5V / 4.5A） |
| 环境适应 | 温度范围：-10℃〜50℃; 湿度：95％RH（40℃，无凝露）;海拔高度：0~5000m |
| 尺寸 | L * W * H = 160 * 150 * 140（MM） |
| 重量 | 2.3千克（无电池），2.8千克（含电池） |
缩进信息：
主体：AV6471光纤熔接机
标准配置：
| 键 | 描述 | 数量 |
| 1 | AV6471光纤熔接机 | 1 |
| 2 | AC电源适配器 | 1 |
| 3 | AC电流电缆 | 1 |
| 4 | 备用电极 | 1 |
| 5 | 气刷 | 1 |
| 6 | 瓶虹吸 | 1 |
| 7 | 纤维支架 | 1 |
| 8 | 用户手册 | 1 |
| 9 | 豪华手提包包 | 1 |
可选设备：
| 键 | 描述 | 备注 |
| 1 | 光纤切割刀 | AV33012 |
| 2 | 锂离子电池 | 11.1 / 10AH |
| 3 | 工具包 | / |
The powerful funtcion and super lowsplicing loss make it be competent forconstruction
of trunk line and FTTX : Because ofthe compact configuration and precisemechanism.
it can adapt to execrableenviroment; The novel fiber imaging systemmake the image clearer
and exquisiter; The real-time embeded OS provide friendlyman machine interface and abundant functions.
The bulit-in large capacity Li-Ionbattery can support long time fieldwork. The embeded sensors measuredtemperature.
humidity and air pressure supply closed-loop feedback control , so theinstrument can adopt all kinds atrocious circumstance and
the consistency ofsplicing loss was improved.
Main Features:
New fullydigitalized design;
Small volume, light weight.
only 2.8kg include battery;
8 seconds splicing.
25 seconds HeatShrinking;
Close shield splice automatically;
Close heater, heat automatically;
X/ Y axes were displayed meanwhile.
Magnification upto 304 times;
Real time calibrating system for discharging, parameter needn t be adjusted; 8217;
Long Electrode Lifetime, upto 4000 times;
USB andVGA ports;
5.7 inch digital high distinguish LCD;
Battery capacity was display in real time. Precisely;
Bulit-in high capacity battery.
220 times splicing and heating can beeasily; accomplished
Typical Application: AV6471 Fiber Splicermainlyappliedtofibercableconstruction, fiberline
maintenance, rush repair fiber cable and fiber device produce test.
| Applicable Fiber | SMF (ITU-T G. 652) , MMF (ITU-T G. 651) , DSF (ITU-T G. 653) , NZDSF |
| Average Splicing Loss | 0.02dB (SM) ,0.01dB (MM) ,0.04dB (DS) ,0.04dB (NZDS) |
| Return Loss | (-60dB |
| Operation Mode | Auto, Half auto, Manual |
| Align Mode | Advanced PAS align mode. |
| Fiber Diameter | clad diameter: 80µm∼150µm, coating diameter: 100µm∼1000µm |
| Cleave Length | 8∼16mm (coating diameter (250µm) , 16mm (coating diameter 250∼1000µm) |
| Magnification | Vertical 152times, horizontal 304times. |
| Image Display | 5.7´ 640*480 LCD. |
| Pull Test | Standard 2N (optional) . |
| Pyrocondensation Tube | 40mm, 60mm and a series of micro Heat-Shrinkable Tubing. |
| Battery Capacity | Typically splice 220 times, charging for 3.5 hour (available when charge) . |
| Battery Lifetime | Cycle life up to 300∼500 times, replaceable. |
| Electrode Lifetime | ) 4000 times, replaceable |
| Lighting for Construction | Built-in super High-brightness LED supply convenient for night work |
| Ports | USB, VGA |
| Power Supply | Built in 11.1V Lithium Ion Battery. AC adopter (input AC100∼240, output DC13.5V/ 4.5A) |
| Environment Adaptation | Temperature range: -10℃∼50℃; Humidity: 95%RH (40℃, no condensing) ;Altitude: 0∼5000m |
| Size | L*W*H=160*150*140 (mm) |
| Weight | 2.3kg (no battery ) , 2.8kg (including battery) |
Indent Information:
Main body: AV6471 Fiber Splicer
Standard equipment:
| Key | Description | QTY |
| 1 | AV6471 optical fiber fusion splicer | 1 |
| 2 | AC power adapter | 1 |
| 3 | AC current cable | 1 |
| 4 | Standby electrode | 1 |
| 5 | Blower brush | 1 |
| 6 | Bottle with siphon | 1 |
| 7 | Fiber bracket | 1 |
| 8 | User´s manual | 1 |
| 9 | Luxury tote kit | 1 |
Optional equipment:
| Key | Description | Remark |
| 1 | Fiber Cleaver | AV33012 |
| 2 | Li-Ion battery | 11.1/10AH |
| 3 | Tool kit | / |
