6.4V 10Ah LiFePO4 Battery
6.4V 10Ah LiFePO4电池
主要特点
1.更长的循环寿命：比铅酸电池提供高20倍的循环寿命和5倍的浮动/日历寿命，有助于最大限度地降低重置成本，降低总体拥有成本。
2.更轻的重量：约40％的可比铅酸电池的重量。替代铅酸电池。
3.更高的功率：提供两倍功率的铅酸电池，甚至高放电率，同时保持高能量容量。
4.更宽的温度范围：-20℃-60℃。
5.卓越的安全性：磷酸铁锂化学消除了高冲击，过充电或短路情况下的爆炸或燃烧的风险。
6.增加灵活性：模块化设计可以同时部署多达四个串联的电池和多达十个电池。
规格
1.额定电压：6.4V
2.额定容量：10Ah
3.循环寿命：> 1.0周期，1.0C 100％DOD
月份自放电： <3%
5.充电效率：100％@ 0。 2C
6.放电效率：96-99％@ 0.5C
7.最大。充电电流：10A
8.最大连续放电电流：10A
9.储存温度：0℃至40℃（32F至104F）@ 60±25％相对湿度
10.防水防尘：IP21
11.外壳材料：PVC
12.尺寸（英寸/mm）：200 * 108 * 25mm（7.87'* 4.25'* 0.98Ins）
重量（磅/千克）：约：0.8Kg（1.76磅）
14.保修：12个月
bms
1.过充电检测功能
2.过放电检测功能
3.过流检测功能
4.温度保护
5.短路检测功能
6.平衡功能
应用
电动汽车，电动汽车
2.太阳能/风能存储系统
3. UPS，备用电源
4.电信
5.医疗设备
6.照明
1.更长的循环寿命：比铅酸电池提供高20倍的循环寿命和5倍的浮动/日历寿命，有助于最大限度地降低重置成本，降低总体拥有成本。
2.更轻的重量：约40％的可比铅酸电池的重量。替代铅酸电池。
3.更高的功率：提供两倍功率的铅酸电池，甚至高放电率，同时保持高能量容量。
4.更宽的温度范围：-20℃-60℃。
5.卓越的安全性：磷酸铁锂化学消除了高冲击，过充电或短路情况下的爆炸或燃烧的风险。
6.增加灵活性：模块化设计可以同时部署多达四个串联的电池和多达十个电池。
规格
1.额定电压：6.4V
2.额定容量：10Ah
3.循环寿命：> 1.0周期，1.0C 100％DOD
月份自放电： <3%
5.充电效率：100％@ 0。 2C
6.放电效率：96-99％@ 0.5C
7.最大。充电电流：10A
8.最大连续放电电流：10A
9.储存温度：0℃至40℃（32F至104F）@ 60±25％相对湿度
10.防水防尘：IP21
11.外壳材料：PVC
12.尺寸（英寸/mm）：200 * 108 * 25mm（7.87'* 4.25'* 0.98Ins）
重量（磅/千克）：约：0.8Kg（1.76磅）
14.保修：12个月
bms
1.过充电检测功能
2.过放电检测功能
3.过流检测功能
4.温度保护
5.短路检测功能
6.平衡功能
应用
电动汽车，电动汽车
2.太阳能/风能存储系统
3. UPS，备用电源
4.电信
5.医疗设备
6.照明
Main features
1. Longer cycle life: offers up to 20times longer cycle life and five times longer float /calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
2. Lighter weight: about 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries.
3. Higher power: delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
4. Wider temperature range: -20℃-60℃.
5. Superior safety: lithium iron phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging or short circuit situation.
6. Increased flexibility: modular design enables deployment of up to four batteries in series and up to ten battery in parallel.
Specifications
1. Nominal voltage: 6.4V
2. Nominal capacity: 10Ah
3. Cycle life: ﹥2000 cycles @1.0C 100%DOD
4. Months self discharge: <3%
5. Efficiency of charge: 100%@0. 2C
6. Efficiency of discharge: 96-99%@0.5C
7. Max. charge current: 10A
8. Max continuous discharge current: 10A
9. Storage temperature: 0 ℃ to 40 ℃ (32F to 104F) @60±25% relative humidity
10. Water dust resistance: IP21
11. Shell material: PVC
12. Dimensions (in./mm.): 200*108*25mm(7.87'*4.25'*0.98Ins)
13. Weight (lbs./kg.): approx: 0.8Kg(1.76lbs)
14. Warranty: 12 months
BMS
1. Overcharge detection function
2. Over discharge detection function
3. Over current detection function
4. Temperature protection
5. Short detection function
6. Balance function
Application
1. Electric vehicles, electric mobility
2. Solar/wind energy storage system
3. UPS, backup power
4. Telecommunication
5. Medical equipment
6. Lighting
1. Longer cycle life: offers up to 20times longer cycle life and five times longer float /calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
2. Lighter weight: about 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries.
3. Higher power: delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
4. Wider temperature range: -20℃-60℃.
5. Superior safety: lithium iron phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging or short circuit situation.
6. Increased flexibility: modular design enables deployment of up to four batteries in series and up to ten battery in parallel.
Specifications
1. Nominal voltage: 6.4V
2. Nominal capacity: 10Ah
3. Cycle life: ﹥2000 cycles @1.0C 100%DOD
4. Months self discharge: <3%
5. Efficiency of charge: 100%@0. 2C
6. Efficiency of discharge: 96-99%@0.5C
7. Max. charge current: 10A
8. Max continuous discharge current: 10A
9. Storage temperature: 0 ℃ to 40 ℃ (32F to 104F) @60±25% relative humidity
10. Water dust resistance: IP21
11. Shell material: PVC
12. Dimensions (in./mm.): 200*108*25mm(7.87'*4.25'*0.98Ins)
13. Weight (lbs./kg.): approx: 0.8Kg(1.76lbs)
14. Warranty: 12 months
BMS
1. Overcharge detection function
2. Over discharge detection function
3. Over current detection function
4. Temperature protection
5. Short detection function
6. Balance function
Application
1. Electric vehicles, electric mobility
2. Solar/wind energy storage system
3. UPS, backup power
4. Telecommunication
5. Medical equipment
6. Lighting
