XLJ - D- 500棘轮切刀工具切割铜/铝电缆）目的是切断铜，铝电缆达500平方毫米。 随着锻造刀刃，快速清洁和安全的切割，可实现。 而伸缩手柄可以使您的工作更省力，方便。 切割能力可达到500平方毫米，当XLJ - D- 300 （正常手柄）只能剪到300平方毫米。
规范
1.适用于
切割铜和铝电缆达500平方毫米。
切割钢丝绳和冷拔铜线是不可取
2.伪造的刀边缘
延长生命的工具，使刀刃锋利。
随着锻造刀刃，快速清洁和安全的切割，可实现。
3.伸缩手柄
延长切削能力500平方毫米，当XLJ - D- 300 （与正常的句柄）减产高达300平方毫米
伸缩手柄，你的工作会变得更加省力方便

XLJ-D-500 Ratchet Cutter Tool For Cutting Cu/ Al Cable) is intended to cut Cu and Al cable up to 500mm2. With forged knife edge, fast clean and safe cutting can be achieved. And the telescopic handles can make your job more labor-saving, easy. The cutting capacity can reach 500mm2, when XLJ-D-300 (normal handles) can only cut up to 300mm2.
Specification
1. Applicable for
Cutting Cu and Al Cable up to 500mm2.
Cutting steel rope and hard-drawn copper wire is not advisable
2. Forged Knife Edge
Prolong life tool and make knife edge sharp.
With forged knife edge, fast clean and safe cutting can be achieved.
3. Telescopic Handles
Extend cutting capacity to 500mm2, when XLJ-D-300 (with normal handles) cut up to 300mm2
With telescopic handles, your job can become more labor-saving and easy