棘轮式电缆剪型LK- 380

棘轮式电缆绞型LK- 380已被通过棘轮驱动单元在奥得仅通过单手操作。

只有一只手可以很容易地切断电缆由于重量很轻。 切割器是适用于切割铜/铝电缆，单股或多股线电缆。

锻造刀片，寿命长切割容易。

注意：

不为切削钢或钢线！

切割范围：切割铜铝电缆下方¢ 30毫米或240平方米

长度： 250毫米

重量： 0.575千克

Ratchet type cable cutter type LK-380

Ratchet type cable cutter type LK-380 has been adopted ratchet driving unit in oder to be operated by one hand only.

Only one hand could cut cables easily due to very light weight . the cutter is applicable for cutting CU/ AL cables, single strand or multi-strands of cables.

Cutting easily with forging blade and long lifetime.

Attention:

Not for cutting steel or steel wire!!

Cutting range : Cutting Cu-AL cable below ¢30mm or 240m2

Length: 250mm

Weight: 0.575kg