0.6\1kV Cold Shrink Termination and Straight Through Joint
0.6/1 k v 冷缩终止和直通接头
议价
加入意向0.6/1 k v 冷缩终止和直通接头
性能标准: IEC60502.4;GB12706.4
特点:
1.冷收缩，也叫做预扩展，基于拥有灵活的内存的橡胶的特点。此外，灵活的橡胶预扩大通过机械方式上，在一个灵活的范围内，然后插入塑料管，固定的而安装，拉断塑料管材，柔性橡胶会自动收缩和上电缆缠。
2.它是易于操作同时安装，同时没有其他专业所需工具。
3.它是安全的因为没有火。
4.它可以使激进的压力转嫁给电缆很长时间，此外保持同步呼吸用的电缆。它有良好的性能，耐水和封使配件可以安全地运作，在很长时间。
订单参考
| 类型 / 订单号码 | 名称 | 电缆范围 |
| 1kV 等 1 * 25-50 | 1 k v 的终止 1 芯电缆 | 25-50 |
| 1kV 等 1 * 70-120 | 70-120 | |
| 1kV 等 1 * 150-240 | 150-240 | |
| 1kV 等 1 * 300-400 | 300-400 | |
| 1kV 等 4 * 25-50 | 1 k v 的终止 4 芯电缆 | 25-50 |
| 1kV 等 4 * 70-120 | 70-120 | |
| 1kV 等 4 * 150-240 | 150-240 | |
| 1 k v TLY4 * 300-400 | 300-400 | |
| 1kV 等 5 * 25-50 | 1 k v 的终止 5CORES 电缆 | 25-50 |
| 1kV 等 5 * 70-120 | 70-120 | |
| 1kV 等 5 * 150-240 | 150-240 | |
| 1kV 等 5 * 300-400 | 300-400 | |
| 1kV 力源 1 * 25-50 | 直通接头 | 25-50 |
| 1kV 力源 1 * 70-120 | 70-120 | |
| 1kV 力源 1 * 150-240 | 150-240 | |
| 1 k v JLY1 * 300-400 | 300-400 | |
| 1kV 力源 4 * 25-50 | 直通接头 | 25-50 |
| 1kV 力源 4 * 70-120 | 70-120 | |
| 1 k v JLY4 * 150-240 | 150-240 | |
| 1kV 力源 4 * 300-400 | 300-400 | |
| 1kV 力源 5 * 25-50 | 直通接头 | 25-50 |
| 1kV 力源 5 * 70-120 | 70-120 | |
| 1kV 力源 5 * 150-240 | 150-240 | |
| 1kV 力源 5 * 300-400 | 300-400 |
技术指标
| 项目 | 测试项目 | 标准要求 | 测试结果 | 注意 |
1 k v / 户外终端和接头 | 1 分钟工频试验 | 4kV 1 分钟过去了，没有严格的无频闪 | 4kV。 1 分钟组合样品无频闪，没有严格不闪光就完了 | 通过 |
| 循环荷载试验 | 5 h 加热，conductiontemperature 95 ℃，3 h 冷却 | 遭受 3 次循环负载测试 | 表示由 下一次测试
| |
| 4 h 电源频率测试 | 2.4KV 4 h 没有闪络，没有严格 | 2.4kV 4 h 组合样品不严格、 不闪光就完了 | 通过 |
0.6/1kV Cold Shrink Termination and Straight Through Joint
Performance Standard: IEC60502.4; GB12706.4
Characteristics:
1. Cold shrink, which is also called Pre-expanded, is based on the characteristic of rubber that holds flexible memory. Furthermore, the flexible rubber is pre-expanded by mechanical ways during one flexible range and then inserted the plastic tubing to be fixed, While installation, Pull off the plastic tubing, the flexible rubber will shrink automatically and be wrapped onto the cable.
2. It's easy to operate while installation and meanwhile no other professional tools needed.
3. It's safe because of no fire.
4. It can make radical pressure onto the cable for long time and furthermore keep synchronous breath with cable. It has nicer performance of water-proof and sealling so that the accessory can function safely in a long time.
Order Reference
| TYPE/ ORDER NUMBER | NAME | CABLE RANGE |
| 1kV TLY 1 *25-50 | TERMINATION FOR 1kV 1 CORES CABLE | 25-50 |
| 1kV TLY 1 *70-120 | 70-120 | |
| 1kV TLY 1 *150-240 | 150-240 | |
| 1kV TLY 1 *300-400 | 300-400 | |
| 1kV TLY 4 *25-50 | TERMINATION FOR 1kV 4 CORES CABLE | 25-50 |
| 1kV TLY 4 *70-120 | 70-120 | |
| 1kV TLY 4 *150-240 | 150-240 | |
| 1kV TLY4 *300-400 | 300-400 | |
| 1kV TLY 5 *25-50 | TERMINATION FOR 1kV 5CORES CABLE | 25-50 |
| 1kV TLY 5 *70-120 | 70-120 | |
| 1kV TLY 5 *150-240 | 150-240 | |
| 1kV TLY 5 *300-400 | 300-400 | |
| 1kV JLY 1 *25-50 | STRAIGHT THROUGH JOINT | 25-50 |
| 1kV JLY 1*70-120 | 70-120 | |
| 1kV JLY 1*150-240 | 150-240 | |
| 1kV JLY1 *300-400 | 300-400 | |
| 1kV JLY 4*25-50 | STRAIGHT THROUGH JOINT | 25-50 |
| 1kV JLY 4 *70-120 | 70-120 | |
| 1kV JLY4 *150-240 | 150-240 | |
| 1kV JLY 4 *300-400 | 300-400 | |
| 1kV JLY 5 *25-50 | STRAIGHT THROUGH JOINT | 25-50 |
| 1kV JLY 5 *70-120 | 70-120 | |
| 1kV JLY 5 *150-240 | 150-240 | |
| 1kV JLY 5 *300-400 | 300-400 |
Technical index
| Item | Test Item | Standard require | Test result | Note |
1kV in/ outdoor terminations and joints | 1min Power frequency test | 4kV 1min no flash over, no strick | 4kV. 1min combination sample no flash, no strick no flash over | Pass |
| Cyclic load test | 5h heating, conductiontemperature 95℃, 3h colling | Subjected to 3 time Cyclic load test | Remarked by the next test
| |
| 4h Power frequency test | 2.4KV 4h no flash over, no strick | 2.4kV 4h Combination sample no strick, no flash over | Pass |
