10\20kV heat shrinkable joints

10\20kV heat shrinkable joints

10 / 20kV的热收缩接头

议价

加入意向

热缩中压分支接头交联聚乙烯和纸绝缘电缆35千伏


产品特点：

  • 独特的压力控制系统：高介电常数材料
  • 设计紧凑，零部件少
  • 安装简单，最少的废物处置
    • 快速，一致的安装意味着安装成本降低
    • 没有特殊的安装工具或模具需要
    • 型挡板环境：使用火炬增加了灵活性，电缆准备在任何气候
  • 高可靠性
  • 热活化密封确保防止湿气进入最大的保护
  • 轻质结构不需要额外的支持
  • 坚韧耐磨的外壳可以防止因不当回填损害
  • 机械强度
  • 符合：GB / T 12706标准
  1. 外套筒
  2. 发辫控制管
  3. 屏蔽绝缘套管
  4. 保温管
  5. 半导电胶带
  6. 密封胶

热缩联合对交联聚乙烯绝缘单芯电缆到35kV
  1. 铜屏蔽层
  2. EMI-导电性带
  3. 防水性填料
  4. 外半conduotive Laye的
  5. 应力控制管
  6. 防水性填料
  7. 内蒙古半conduotive层
  8. 芯导体
  9. 半导电性带
  10. 连接器
  11. 绝缘套管
  12. 内保温管
  13. 外保温管
  14. Iinsulation /导电管
  15. 芯线绝缘

热缩接头纸绝缘三芯电缆35kV及以下
  1. 铅套
  2. 半导电性带
  3. 耐油性填料
  4. 红胶泥，并祝
  5. 应力控制管
  6. 红胶泥填充物
  7. 耐油管
  8. 油纸绝缘
  9. 芯导体
  10. 铁氟龙胶带
  11. 连接器
  12. 耐油性填料
  13. 绝缘/半导电管
  14. 外保温管
  15. 内保温管

热缩接头转换从纸绝缘电缆塑料绝缘电缆15千伏
  1. 铅套
  2. 半导电性带
  3. 耐油性填料
  4. 红胶泥填充物
  5. 应力控制管
  6. 红胶泥填充物
  7. 耐油管
  8. 油纸绝缘
  9. 芯导体
  10. 铁氟龙胶带
  11. 连接器
  12. 耐油性填料
  13. 耐油管
  14. 绝缘/半导电管
  15. 红胶泥填充物
  16. 红胶泥填充物
  17. 红胶泥填充物
  18. 半导电性带
  19. 半导电层
  20. 铜屏蔽层
技术数据
编号。 属性 测试条件及要求 结果
1
 交流耐压1分钟。 （干耐受，对于户内终端） 无击穿和飞弧应发生在105kV，1分钟 没有击穿和闪络combi.sample
2
 局部放电 39kV，≤10PC 39kV，≤10PC
3
 负载周期 加热5小时，冷却3小时。 导线的温度为95℃，3个周期 导线的温度为95℃。 结果请参阅以下测试
4
 耐冲击电压1.2 / 50微秒±10次 10正，10负的冲动，在250KV，闪1次是允许的，但不包括总测试时间 组合式的无故障。 样品发生在250KV
5
 直流耐压负15分。 无击穿和飞弧应发生在156kV 没有击穿和闪络combi.sample
6
 交流耐压，4H 无击穿和飞弧应发生在104kV，4H 没有击穿和闪络combi.sample
7
 油密封起来测试
（仅适用于纸绝缘电缆） 		加热24小时，冷却24小时。 导线的温度为65℃，机油压力：100MPA 无泄漏，无渗出
尺寸
规格。 描述
单核/ 3核
ConductorCross截面（mm2）
JSY-35/1×1 10 / 20kV的热缩接头交联聚乙烯电力电缆长达35千伏
单核
50~95
JSY-35/1×2
单核
120~185
JSY-35/1×3
单核
240~400
JSY-35 / 3X1
3核
50~95
JSY-35/3×2
3核
120~185
JSY-35/3×3
3核
240~400
JSZ-35 / 1x1的 10 / 20kV的热缩接头纸绝缘电力电缆高达35千伏
单核
50~95
JSZ-35/1×2
单核
120~185
JSZ-35/1×3
单核
240~400
JSZ-35 / 3X1
3核
50~95
JSZ-35/3×2
3核
120~185
JSZ-35/3×3
3核
240~400
JSYZ-35 / 1x1的 10 / 20kV的热缩接头转变，从纸绝缘电缆塑料绝缘电缆35千伏
单核
50~95
JSYZ-35/1×2
单核
120~185
JSYZ-35/1×3
单核
240~400
JSYZ-35/3×
3核
50~95
JSYZ-35/3×2
3核
120~185
JSYZ-35/3×3
3核
240~400

Heat Shrinkable Medium Voltage Branch Joints For XLPE And Paper Insulated Cables Up To 35 KV


Features:

  • Unique stress control system: High permittivity material
  • Compact design, Few components
  • Simple to install, Minimal waste for disposal
    • Fast, consistent installation means lower installed costs
    • No special installation tools or dies needed
    • nstallation environment: use of torch adds flexibility to cable preparation in any climate
  • High reliability
  • Heat-activated seals ensure maximum protection against moisture ingress
  • Lightweight construction requires no additional support
  • Tough abrasion-resistant outer covering protects against damage from improper backfill
  • Mechanical robustness
  • Meet: GB/ T 12706 Standard
  1. Outer Sleeve
  2. tress Control Tubing
  3. Screened Insulation tubing
  4. Insulation Tubing
  5. Semi Conductive tape
  6. Sealant

Heat Shrinkable Joint For XLPE Single Core Cable Up To 35kV
  1. Copper screen layer
  2. emi-conductive tape
  3. Water-proof resistance filler
  4. Outer semi-conduotive laye
  5. Stress control tubing
  6. Water-proof resistance filler
  7. Inner semi-conduotive layer
  8. Core Conductor
  9. Semi-conductive tape
  10. connector
  11. Insulation tubing
  12. Inner insulation tubing
  13. Outer insulation tubing
  14. Iinsulation/ conductive tubing
  15. Core insulation

Heat Shrinkable Joint For Paper Insulated 3-Core Cable Up To 35kV
  1. Lead sheath
  2. Semi-conductive tape
  3. Oil resistance filler
  4. Red mastic fille
  5. Stress control tubing
  6. Red mastic filler
  7. Oil resistant tubing
  8. Oil paper insulation
  9. Core Conductor
  10. Teflon tape
  11. Connector
  12. Oil resistance filler
  13. Insulation/ semi-conductive tubing
  14. Outer insulation tubing
  15. Inner insulation tubing

Heat Shrinkable Joints For Transitions From Paper Insulated Cables To Plastic Insulated Cables Up To 15 KV
  1. Lead sheath
  2. Semi-conductive tape
  3. Oil resistance filler
  4. Red mastic filler
  5. Stress control tubing
  6. Red mastic filler
  7. Oil resistance tubing
  8. Oil paper insulation
  9. Core Conductor
  10. Teflon tape
  11. Connector
  12. Oil resistance filler
  13. Oil resistance tubing
  14. Insulation/ semi-conductive tubing
  15. Red mastic filler
  16. Red mastic filler
  17. Red mastic filler
  18. Semi-conductive tape
  19. Semi-conductive layer
  20. Copper screen layer
Technical Data
Item No. Property Test condition and Requirement Results
1
 AC withstand for 1 min. (dry withstand, for indoor termination) No breakdown and flashover shall occur at 105kV, 1min No breakdown and flashover occurred on the combi.sample
2
 Partial discharge 39kV, ≤10PC 39kV, ≤10PC
3
 Load cycle Heating for 5h, cooling for 3h. Conductor's temperature is 95℃, 3 cycles Conductor's temperature is 95℃. Results refer to the following test
4
 Impulse voltage withstand 1.2/50us±10times 10 positiVe and 10 negative impulses at 250kV, flashover 1 time is allowed but not including total testing times No breakdown of the combi. sample occurred at 250kV
5
 DC voltage withstand negative 15 min. No breakdown and flashover shall occur at 156kV No breakdown and flashover occurred on the combi.sample
6
 AC voltage withstand, 4h No breakdown and flashover shall occur at 104kV, 4h No breakdown and flashover occurred on the combi.sample
7
 Oil-seal up test
(Only for Paper insulated cables) 		Heating for 24h, cooling for 24h. Conductor's temperature is 65℃, oil pressure: 100MPA No leaking, no seeping
Dimensions
Spec. Description
Single Core/ 3-Core
ConductorCross Section (mm2)
JSY-35/1x1 10/20kV heat shrinkable joints for XLPE power cables up to 35 kV
Single Core
50~95
JSY-35/1x2
Single Core
120~185
JSY-35/1x3
Single Core
240~400
JSY-35/3x1
3-Core
50~95
JSY-35/3x2
3-Core
120~185
JSY-35/3x3
3-Core
240~400
JSZ-35/1x1 10/20kV heat shrinkable joints for paper insulated power cables up to 35 kV
Single Core
50~95
JSZ-35/1x2
Single Core
120~185
JSZ-35/1x3
Single Core
240~400
JSZ-35/3x1
3-Core
50~95
JSZ-35/3x2
3-Core
120~185
JSZ-35/3x3
3-Core
240~400
JSYZ-35/1x1 10/20kV heat shrinkable joints for transitions from paper insulated cables to plastic insulated cables up to 35 kV
Single Core
50~95
JSYZ-35/1x2
Single Core
120~185
JSYZ-35/1x3
Single Core
240~400
JSYZ-35/3x1
3-Core
50~95
JSYZ-35/3x2
3-Core
120~185
JSYZ-35/3x3
3-Core
240~400