6\12kV heat shrinkable terminations

6 / 12kV的热缩终端

议价

加入意向

译文
原文

6 / 12kV的热缩终端

6 / 12kV的热缩终结于室内外应用用于交联聚乙烯和纸绝缘电力电缆高达15 kV
产品特点：

独特的压力控制系统：高介电常数材料
ompact设计，零部件少
安装简单，最少的废物处置
- 快速，一致的安装意味着安装成本降低
- 安装环境：使用火炬增加了灵活性，电缆准备在任何气候
高可靠性
热活化密封确保防止湿气进入最大的保护
ightweight建设不需要额外的支持
抗紫外线，非跟踪外管，使用寿命长，即使在恶劣的条件。
机械强度
符合：GB / T 12706标准

绝缘套管
应力控制管
爆发
Trifurcating
密封管
相色管
Voil填料

绝缘套管
应力控制管
爆发
Trifurcating
密封管
相色管
Voil填料
棚
3孔棚“

热缩接线端。XLPE电缆高达15kV

地编织：提供屏蔽连续性
腔填充物：防潮密封，非跟踪，高压填料
1. 当提供与热缩材料结合防水接头密封。
2. 不会变硬或开裂。
OLL泉：具有恒定力辊压弹簧，提供安全的接地无需焊接。
非跟踪，热收缩外绝缘套管：
1. 提供了出色的UV稳定性
2. 可承受污染环境。
3. 证明可承受严苛的作业。
热缩应力控制管：
1. 降低在电缆屏蔽层的安全操作电平的端部的电应力梯度。
2. 缩小以适合出符合规格的电缆。
3. 提供长期的电气性能。
热缩雨裙：
1. 增加表面爬电距离。
2. 轻松适应终端在户外使用。
密封绝缘套管

技术数据

编号。	属性	测试条件及要求	结果
1	交流耐压1分钟。（干耐受，对于户内终端）	无击穿和飞弧应发生在45千伏，1分钟	没有击穿和闪络两用。在45千伏，1分钟取样
2	交流耐压1分钟。（湿耐受，对于户外终端）	无击穿和飞弧应发生在45千伏，1分钟	没有击穿和闪络两用。在45千伏，1分钟取样
3	局部放电	13kV，≤20PC	13kV，≤20PC
4	负载周期	加热5小时，冷却3小时。导线的温度为95℃，3个周期	导线的温度为95℃。结果请参阅以下测试
5	耐冲击电压1.2 / 50微秒±10次	10正，10负的冲动在105kV，闪1次是允许的，但不包括总测试时间	组合式的无故障。样品发生在105kV
6	直流耐压负15分。	无击穿和飞弧应发生在52KV	没有击穿和闪络两用。在52KV的样品，15分钟
7	交流耐压，4H	无击穿和飞弧应发生在35kV及以下，4小时	没有击穿和闪络两用。在35kV及以下的样品，4H
8	油密封起来测试（仅适用于纸绝缘电缆）	加热24小时，冷却24小时。导线的温度为65℃，机油压力：100MPA	无泄漏，无渗出

尺寸

规格。	描述	应用室内室外	单核/ 3核	导体截面（mm2）
NSY-15 / 1x1的	6 / 12kV的热缩终端长达15千伏室内应用的交联聚乙烯绝缘电力电缆	室内	单核	25~50
NSY-15/1×2		室内	单核	70~120
NSY-15/1×3		室内	单核	150~240
NSY-15/1×4		室内	单核	300~400
NSY-15/3×		室内	3核	25~50
NSY-15/3×2		室内	3核	70~120
NSY-15/3×3		室内	3核	150~240
NSY-15 / 3x4的		室内	3核	300~400
WSY-15 / 1x1的	6 / 12kV的热缩终端长达15千伏户外应用交联聚乙烯绝缘电力电缆	室外	单核	25~50
WSY-15/1×2		室外	单核	70~120
WSY-15/1×3		室外	单核	150~240
WSY-15/1×4		室外	单核	300~400
WSY-15/3×		室外	3核	25~50
WSY-15/3×2		室外	3核	70~120
WSY-15/3×3		室外	3核	150~240
WSY-15 / 3x4的		室外	3核	300~400
NSZ-15 / 1x1的	6 / 12kV的热缩终端长达15千伏户内应用纸绝缘电力电缆	室内	单核	25~50
NSZ-15/1×2		室内	单核	70~120
NSZ-15/1×3		室内	单核	150~240
NSZ-15/1×4		室内	单核	300~400
NSZ-15 / 3X1		室内	3核	25~50
NSZ-15/3×2		室内	3核	70~120
NSZ-15/3×3		室内	3核	150~240
NSZ-15/3×4		室内	3核	300~400
WSZ-15 / 1x1的	6 / 12kV的热缩终端长达15千伏户外应用纸绝缘电力电缆	室外	单核	25~50
WSZ-15/1×2		室外	单核	70~120
WSZ-15/1×3		室外	单核	150~240
WSZ-15/1×4		室外	单核	300~400
WSZ-15/3×		室外	3核	25~50
WSZ-15/3×2		室外	3核	70~120
WSZ-15/3×3		室外	3核	150~240
WSZ-15 / 3x4的		室外	3核	300~400

6/12kV heat shrinkable terminations

6/12kV Heat Shrinkable Terminations For Indoor And Outdoor Applications For XLPE And Paper Insulated Power Cables Up To 15 KV
Features:

Unique stress control system: High permittivity material
ompact design, Few components
Simple to install, Minimal waste for disposal
- Fast, consistent installation means lower installed costs
- Installation environment: use of torch adds flexibility to cable preparation in any climate
High reliability
Heat-activated seals ensure maximum protection against moisture ingress
ightweight construction requires no additional support
UV resistant, non-tracking outer tube for long life, even under adverse conditions.
Mechanical robustness
Meet: GB/ T 12706 Standard

Insulation tubing
Stress control tubing
Breakout
Trifurcating
Sealing tubing
Phase color tubing
Voil filler

Insulation tubing
Stress control tubing
Breakout
Trifurcating
Sealing tubing
Phase color tubing
Voil filler
Shed
3-hole shed'

Heat Shrinkable Terminations For XLPE Cables Up To 15kV

Ground braid: Provides shield continuity
Void filler: Moisture sealing, Non-tracking, high voltage filler
1. Provides a watertight connector seal when combined with heat shrinkable material.
2. Will not harden or crack.
oll spring: Has a constant-force roll spring, which provides secure grounding without soldering.
Non-tracking, heat shrinkable outer insulation tubing:
1. Provides excellent UV stability
2. Withstands polluted environments.
3. Is proven to withstand severe applications.
Heat shrinkable stress control tubing:
1. Reduces the electrical stress gradient at the end of the cable shield to safe operating levels.
2. Shrinks to fit out-of-spec cable.
3. Provides long-term electrical performance.
Heat shrinkable Rain Skirts:
1. Increase surface creepage distance.
2. Easily adapt terminations for outdoor use.
Sealing Insulation tubing

Technical Data

Item No.	Property	Test condition and Requirement	Results
1	AC withstand for 1 min. (dry withstand, for indoor termination)	No breakdown and flashover shall occur at 45kV, 1min	No breakdown and flashover occurred on the combi. sample at 45kV, 1min
2	AC withstand for 1 min. (wet withstand, for outdoor termination)	No breakdown and flashover shall occur at 45kV, 1min	No breakdown and flashover occurred on the combi. sample at 45kV, 1min
3	Partial discharge	13kV, ≤20PC	13kV, ≤20PC
4	Load cycle	Heating for 5h, cooling for 3h. Conductor's temperature is 95℃, 3 cycles	Conductor's temperature is 95℃. Results refer to the following test
5	Impulse voltage withstand 1.2/50us±10times	10 positiVe and 10 negative impulses at 105kV, flashover 1 time is allowed but not including total testing times	No breakdown of the combi. sample occurred at 105kV
6	DC voltage withstand negative 15 min.	No breakdown and flashover shall occur at 52kV	No breakdown and flashover occurred on the combi. sample at 52kV, 15min
7	AC voltage withstand, 4h	No breakdown and flashover shall occur at 35kV, 4h	No breakdown and flashover occurred on the combi. sample at 35kV, 4h
8	Oil-seal up test (Only for Paper insulated cables)	Heating for 24h, cooling for 24h. Conductor's temperature is 65℃, oil pressure: 100MPA	No leaking, no seeping

Dimensions

Spec.	Description	Application Indoor/ Outdoor	Single Core/ 3-Core	Conductor Cross Section (mm2)
NSY-15/1x1	6/12kV heat shrinkable terminations for indoor applications for XLPE power cables up to 15 kV	Indoor	Single Core	25~50
NSY-15/1x2		Indoor	Single Core	70~120
NSY-15/1x3		Indoor	Single Core	150~240
NSY-15/1x4		Indoor	Single Core	300~400
NSY-15/3x1		Indoor	3-Core	25~50
NSY-15/3x2		Indoor	3-Core	70~120
NSY-15/3x3		Indoor	3-Core	150~240
NSY-15/3x4		Indoor	3-Core	300~400
WSY-15/1x1	6/12kV heat shrinkable terminations for Outdoor applications for XLPE power cables up to 15 kV	Outdoor	Single Core	25~50
WSY-15/1x2		Outdoor	Single Core	70~120
WSY-15/1x3		Outdoor	Single Core	150~240
WSY-15/1x4		Outdoor	Single Core	300~400
WSY-15/3x1		Outdoor	3-Core	25~50
WSY-15/3x2		Outdoor	3-Core	70~120
WSY-15/3x3		Outdoor	3-Core	150~240
WSY-15/3x4		Outdoor	3-Core	300~400
NSZ-15/1x1	6/12kV heat shrinkable terminations for indoor applications for paper insulated power cables up to 15 kV	Indoor	Single Core	25~50
NSZ-15/1x2		Indoor	Single Core	70~120
NSZ-15/1x3		Indoor	Single Core	150~240
NSZ-15/1x4		Indoor	Single Core	300~400
NSZ-15/3x1		Indoor	3-Core	25~50
NSZ-15/3x2		Indoor	3-Core	70~120
NSZ-15/3x3		Indoor	3-Core	150~240
NSZ-15/3x4		Indoor	3-Core	300~400
WSZ-15/1x1	6/12kV heat shrinkable terminations for Outdoor applications for paper insulated power cables up to 15 kV	Outdoor	Single Core	25~50
WSZ-15/1x2		Outdoor	Single Core	70~120
WSZ-15/1x3		Outdoor	Single Core	150~240
WSZ-15/1x4		Outdoor	Single Core	300~400
WSZ-15/3x1		Outdoor	3-Core	25~50
WSZ-15/3x2		Outdoor	3-Core	70~120
WSZ-15/3x3		Outdoor	3-Core	150~240
WSZ-15/3x4		Outdoor	3-Core	300~400