3 in1 hydraulic Busbar Processor Machine with Cutting Bending Punching tool
3合1液压母线处理器机用切割折弯冲压工具
议价
加入意向3合1液压母线处理器机用切割折弯冲压工具
规范
3合1液压母线处理器/机切割折弯冲压HB-150W
1.适用于：切割/折弯/冲压铜铝母线
2.主要包括4个工具：刀（CWC-150V）本德尔（CB-200A）
冲床（CH-60）泵（CTE-25AS）
3.配有4路油通道交换机：自由选择工作工具
4.脚踏控制器：免费两只手
5.活塞可以在操作过程中随时退出
工具的规格（切割机，折弯机，冲床，泵）
| 1. | CWC-150V | 液压切刀 | 1. | 输出 | 15T |
| 2. | 切割范围 | 150 *12毫米 | |||
| 3. | 切割 | 铜铝母线 | |||
| 4. | 重量 | 24千克 | |||
| 5. | 尺寸 | 410 * 275 *180毫米 | |||
| 6. | V型刀片：快速和干净的切割 | ||||
| 7. | 回收的缩减废料 | ||||
| 2. | CB-200A | 液压弯管机 （勃起弯曲） | 1. | 输出 | 15T |
| 2. | 弯曲范围 | 150 *12毫米 | |||
| 3. | 重量 | 18.5千克 | |||
| 4. | 尺寸 | 360 * 260 *160毫米 | |||
| 5. | 弯曲 | 铜母线 | |||
| 6. | 最大弯曲角度 | 90度 | |||
| 7. | 随着不同的弯曲角度 | ||||
| 8. | 有位机 | ||||
| 9. | 打开工具本体，轻松拍摄出弯曲母线 | ||||
| 3. | CH-60 | 液压冲床 | 1. | 输出 | 31T |
| 2. | 冲孔范围 | 直径6-20.5mm最大厚度：13毫米 | |||
| 3. | 冲孔 | 铜铝母线 | |||
| 4. | 喉深 | 95毫米 | |||
| 5. | 重量 | 13.5千克 | |||
| 6. | 尺寸 | 350 * 245 *110毫米 | |||
| 7. | Accessary1 | 4模具：直径10.5 13.8 1720.5毫米 | |||
| 8. | Accessary2 | 1固定扳手1六角扳手 | |||
| 4. | CTE-25AS | 液压泵 | 1. | 出油口路 | 单孔 |
| 2. | 库容 | 4000cc | |||
| 3. | 重量 | 15.2千克 | |||
| 4. | 尺寸 | 310 * 270 *360毫米 | |||
| 5. | 额定工作压力 | 700kgf / cm 2的 | |||
| 6. | 安全阀 | 自动压力释放 避免过压损坏 | |||
| 7. | 操作过程中退出pistion | ||||
3 in1 hydraulic Busbar Processor Machine with Cutting Bending Punching tool
Specification
3 in 1 Hydraulic BusBar Processor/ Machine Cutting Bending Punching HB-150W
1. Applicable for: Cutting/ bending/ punching Cu Al BusBar
2. Mainly include 4 tools: Cutter (CWC-150V) Bender (CB-200A)
Puncher (CH-60) Pump (CTE-25AS)
3. Fitted with 4 way oil channel switch: Freely choose the working tool
4. Foot controller: Free two hands
5. Piston can withdraw anytime during operation
Specifications of Tools (cutter, bender, puncher, pump)
| 1. | CWC-150V | Hydraulic cutter | 1. | Output | 15T |
| 2. | Cutting Range | 150*12mm | |||
| 3. | Cutting | Cu Al Bus bar | |||
| 4. | Weight | 24kg | |||
| 5. | Size | 410*275*180mm | |||
| 6. | V Shape Blade: fast and clean cutting | ||||
| 7. | Recycle cut-down Scrap | ||||
| 2. | CB-200A | Hydraulic Bender (Erective Bending) | 1. | Output | 15T |
| 2. | Bending Range | 150*12mm | |||
| 3. | Weight | 18.5kg | |||
| 4. | Size | 360*260*160mm | |||
| 5. | Bending | Cu Bus bar | |||
| 6. | Max bending angle | 90 Degree | |||
| 7. | With different bending angle | ||||
| 8. | with position unit | ||||
| 9. | Open tool body, easily take out bended bus bar | ||||
| 3. | CH-60 | Hydraulic Puncher | 1. | Output | 31T |
| 2. | Punching Range | Dia 6-20.5mm Max thickness: 13mm | |||
| 3. | Punching | Cu Al Bus bar | |||
| 4. | Throat depth | 95mm | |||
| 5. | Weight | 13.5kg | |||
| 6. | Size | 350*245*110mm | |||
| 7. | Accessary1 | 4 Dies: Dia 10.5 13.8 17 20.5mm | |||
| 8. | Accessary2 | 1 fixing spanner 1 hexagon spanner | |||
| 4. | CTE-25AS | Hydraulic Pump | 1. | Way of oil outlet | Single Hole |
| 2. | Reservoir Capacity | 4000cc | |||
| 3. | Weight | 15.2kg | |||
| 4. | Size | 310*270*360mm | |||
| 5. | Rating working pressure | 700kgf/ cm 2 | |||
| 6. | Pressure safety Valve | Automatically pressure release avoid over pressure damage | |||
| 7. | Withdraw pistion during operation | ||||
