EZ-240迷你电池电压线钳压接16-240mm2电缆

EZ-240迷你电池电气压接工具用于压接16-240mm2耳
1. 微电脑控制系统,自动检测压力 当它被压接,与双安全保护。
2.液压装置采用一个自动回缩它返回活塞到它的开始位置时达到最大的操作压力。
3.配备了对连接材料的快速接近和慢速工作行程的工具。
4.压接头可以顺畅地通过绕纵向轴线360°,以获得对紧拐角和其它困难的工作区域更好地进入转动。 (掀头轻松打开,旋转360度)
5.如果从设定工作压力或低电池充电的偏差被识别,发出声音信号和红色闪烁。
6. 所有工具都可以通过一个触发器来控制。 这些结果在一个易于处理和更好的抓地力相比两个按钮操作。
7.狮电池做既没有记忆效应,也不自放电。 即使在非长期工作的工具是随时可以工作。 另外,我们看到 用50%的容量和更短的充电循环的低功率重量比 相比镍氢电池。
8.温度传感器使得该工具停止,当温度超过60度自动工作。
9.在很长一段时间的工作,故障信号的声音; 这意味着该工具不能继续工作,直到降低到正常的温度。
10.人体工程学设计,单手操作。
规范
压着力 | 50KN |
行程 | 12毫米 |
压接/充电 | 170times(铜150平方毫米) |
压接/充电 | 3S-6S(取决于电缆的大小) |
电压 | 18V |
容量 | 3.0Ah |
充电时间 | 2小时 |
包 | 精钢表壳 |
压接模具 | 162535507095120150185240平方毫米 |
电池 | 2只 |
充电器 | 1个 |
密封缸环 | 1套 |
安全阀密封环 | 1套 |
EZ-240 Mini Battery Electrical Crimping Tools used for crimping 16-240mm2 lugs
1. Microcomputer control system-automatically detect the pressure when it is crimping, with double safety protect.
2. The hydraulic unit incorporates an automatic retraction which returns the piston into it is starting position when the maximum operating pressure is reached.
3. The tool equipped with a fast approach towards the connecting material and a slow working stroke.
4. The crimping head can be smoothly turned by 360°around the longitudinal axis in order to gain better access to tight comers and other difficult working areas. (Flip top head to open easily, rotates 360 degree)
5. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
6. All tools can be controlled by one trigger. These results in an easy handling and a better grip compared to a two button operation.
7. Lion batteries do neither have a memory effect nor self-discharge. Even after long periods of non-operation the tool is always ready to operate. In addition we see a low power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
8. A Temperature sensor makes the tool stop working automatically when the temperature over 60 degree.
9. Under long time working, the fault signal sounds; it means the tool can't continue work until the temperature reduced to the normal.
10. Ergonomic design for one hand operation.
Specification
Crimping force | 50KN |
Stroke | 12mm |
Crimp/ charge | 170times (Cu 150mm2) |
Crimp/ charge | 3s-6s (depend on the size of cable) |
Voltage | 18V |
Capacity | 3.0Ah |
Charging time | 2hours |
Package | steel case |
Crimping dies | 162535507095120150185240mm2 |
Battery | 2pcs |
Charger | 1pcs |
Sealing ring of cylinder | 1set |
Sealing ring of safety valve | 1set |