液压单元集成并自动回缩返回活塞到它的起始位置时达到最大的操作压力。

手动回缩允许用户将活塞返回到开始位置的情况下的不正确的卷曲。 该设备配有一个特殊的制动停止时，活塞和当触发释放死去的向前运动。

该设备配备有一个双活塞泵，其特征是所述连接器和慢速压接运动向前金属模具的一个快速的方法。

压接头可以顺利通过绕纵轴360度，以获得对急弯和其他困难地区工作更好地进入打开。

锂离子电池做既没有记忆效应，也不自放电。 即使在非手术的长时间的工具是随时可以工作。 此外，我们看到一个低功率重量比50％更高的容量和更短的充电周期比较镍氢电池。

的温度传感器，使工具停止自动工作时根据时间长超过60度的温度工作时，故障信号的声音，这意味着该工具不能继续工作，直到降低到正常的温度。

The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH batteries.

A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normal.