EZ60UNV Battery-Powered Hydraulic Tools With Crimping\Cutting\Punching tool
EZ60UNV电池供电液压工具，卷边/切割/冲压工具
议价
加入意向电池供电液压工具，卷边/切割/冲压工具（EZ60UNV）
特征：
EZ系列电池供电液压工具搭载18V锂离子电池提供高出50％的容量，与卷边，切割和打孔的多功能。
1.液压单元集成并自动回缩返回活塞到它的起始位置时达到最大的操作压力。
2，一种手动收缩允许用户将活塞返回到开始位置的情况下的不正确的卷曲。 该设备配有一个特殊的制动停止时，活塞和当触发释放死去的向前运动。
3.本机配备有一个双活塞泵，其特征在于所述模具的一个快速的方法转发连接器和慢速压接动作。
4.压接头可以顺畅地通过绕纵向轴线360度，以获得对急弯和其他困难的工作区域更好地进入转动。
5.锂离子电池做既没有记忆效应，也不自放电。 即使在非手术的长时间的工具是随时可以工作。 此外，我们看到一个低功率重量比50％更高的容量和更短的充电周期比较镍氢电池。
6.一种温度传感器，使工具停止自动工作时根据时间长超过60度的温度工作时，故障信号的声音，这意味着该工具不能继续工作，直到降低到正常的温度。
| 模型 | EZ-60UNV多功能电池动力工具 |
| 压着力： | 60KN |
| 行程： | 42毫米 |
| 每次充电压着： | 70crimps（150毫米2铜电缆） |
| 压着周期： | 3S-6S（取决于大小） |
| 切割范围： | 40毫米（铜/铝） |
| 每次充电拳： | 100punches |
| 最大冲孔： | 回合 |
| 冲床： | 60.5毫米 |
| 拳： | 3mm以下的厚度（90x90mm） |
| 电池电压： | 18v |
| 电池容量： | 3.0Ah |
| 充电时间： | 2-2.5hs |
| 包： | 精钢表壳 |
| 压接模具： | 162535507095120150185240300毫米2 |
| 注：2电池，1充电器，2套O型圈的油缸和安全阀 | |
Battery-Powered Hydraulic Tools With Crimping/ Cutting/ Punching tool (EZ60UNV)
Feature:
EZ series Battery-Powered Hydraulic Tools powered by 18V Lithium-Ion Batteries offering 50% higher capacity, with Crimping, Cutting and Punching multi-function.
1. The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
2. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
3. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
4. The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
6. A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normal.
| Model | EZ-60UNV Multi-Function Battery Powered Tools |
| Crimping force: | 60KN |
| Stroke: | 42mm |
| Crimping per charge: | 70crimps (150mm 2 Cu cable) |
| Crimping cycle: | 3s-6s (depend on the size) |
| Cutting Range: | 40mm (Cu/ Al) |
| punches per charge: | 100punches |
| max punching hole: | round |
| puncher: | 60.5mm |
| punches: | the thickness below 3mm (90x90mm) |
| Battery voltage: | 18v |
| Battery capacity: | 3.0Ah |
| Charging time: | 2-2.5hs |
| Package: | steel case |
| Crimping dies: | 162535507095120150185240300mm 2 |
| Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve | |
