ez-300 Battery powered hydraulic crimping\compression tool
EZ-300电池供电液压压接/压缩工具
议价
加入意向EZ-300电池供电液压压接压缩工具
电池电缆接线片压接器5116
型号：EZ-300电池供电的电缆连接器压接工具
EZ-300电池供电压接工具压接16-300mm2耳
EZ-300是压接工具，铜/铝凸块与16线
1.液压单元集成并自动回缩返回活塞到它的起始位置时达到最大的操作压力。
2，一种手动收缩允许用户将活塞返回到开始位置的情况下的不正确的卷曲。 该设备配有一个特殊的制动停止时，活塞和当触发释放死去的向前运动。
3.本机配备有一个双活塞泵，其特征在于所述模具的一个快速的方法转发连接器和慢速压接动作。
4.压接头可以顺畅地通过绕纵向轴线360度，以获得对急弯和其他困难的工作区域更好地进入转动。
5.锂离子电池做既没有记忆效应，也不自放电。 即使在非手术的长时间的工具是随时可以工作。 此外，我们看到一个低功率重量比50％更高的容量和更短的充电周期比较镍氢电池。
6.一种温度传感器，使工具停止自动工作时根据时间长超过60度的温度工作时，故障信号的声音，这意味着该工具不能继续工作，直到降低到正常的温度。
压着力：60KN
行程：17毫米
压接/充电：320次（铜150平方毫米）
压着周期：3-6s（取决于电缆的大小）
电压：18V
容量：3.0Ah
充电时间：2小时
包：精钢表壳。
附件：
压接模具16，25，35，50，70，95，120，150，185，240，300平方毫米
电池：2 PCS
充电器：1 PC
气缸密封圈：1套
安全阀密封圈：1套
ez-300 Battery powered hydraulic crimping compression tool
battery cable lug crimper 5116
Model: ez-300 battery powered cable connector crimping tool
EZ-300 Battery Powered Crimping Tools for Crimp 16-300mm2 lugs
EZ-300 is a tool for crimping Cu/ Al lugs with cables from 16
1. The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
2. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
3. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
4. The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH batteries.
6. A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normal.
Crimping force: 60KN
Stroke: 17mm
Crimp/ charge: 320 times (Cu 150mm2)
Crimping cycle: 3-6s (depend on the size of cable)
Voltage: 18V
Capacity: 3.0Ah
Charging time: 2 hours
Package: Steel case.
ACCESSORIES:
Crimping dies 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2
Battery: 2 PCS
Charger: 1 PC
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set
