RJ45 Flat STP CAT7 Patch Cord Ethernet Patch Cable
RJ45平板STP CAT7跳线以太网跳线
规格：
- 扁平以太网类别7 / cat 7电缆
- 导体结构：32AWG 7 / 0.08mm裸铜
- 线材厚度：2.2 * 7.2mm
- 外壳材料：PVC（RoHS环保材料）
- 绝缘材料：聚乙烯（HD-PE）
- 排水线材料：30AWG 7 / 0.10mm镀锡铜
- 模具注塑部件：标准开机/太阳镜模具开机
- 连接器：50μ镀金8P8C短体RJ45
- 传输速率：高达1000Mbps（千兆以太网），适用于10G基站TX
- 线结构：四对双绞线，铝箔屏蔽
- 接线：符合TIA / EIA 568B标准。
- 接合周期：超过1000次（至少）
- 使用fluke DTX-1800电缆分析仪测试为600MHz
- 可用长度：2/3/5/7/10/14/25/50英尺（0.5 / 1/2/3/5/10/15/20米）
- 合适的温度：-10〜45℃
Specifications:
- Flat Ethernet category 7/cat 7 cable
- Conductor structure: 32AWG 7/0.08mm bare copper
- Wire thickness: 2.2 * 7.2mm
- Jacket material: PVC (RoHS environmental material)
- Insulation material: Polyethylene (HD-PE)
- Drain wire material: 30AWG 7/0.10mm tinned copper
- Mold Injection parts: standard boot/sunglass mold boot
- Connector: 50μ gold plated 8P8C short body RJ45
- Transfer rate: up to 1000Mbps (Gigabit Ethernet), applicable to 10G base TX
- Wire structure: four twisted pairs, aluminum foil shielded
- Wiring: complies with TIA/EIA 568B standard.
- Mating cycles: more than 1000 times (at least)
- Tested to 600MHz using a fluke DTX-1800 cable analyzer
- Available lengths: 2/3/5/7/10/14/25/50 feet(0.5/1/2/3/5/10/15/20 meters)
- Suitable temperature: -10 ~ 45°C
