规范：
•部件号：HL-PL / L109D
•说明：专利9W DIP LED PL-C玉米灯
•基本尺寸：41（D）x152mm
•材料：铝散热器，集成设计有效地解决了散热。
•基本：G24D / G24Q / GX23-2 / G23-2 / E26 / E27 / B22 / E14可用
•光源：Epistar 0.06W 8〜9LmФ5.0mmDIP LED x 135pcs
•输入电压：85-265V AC（PF≥0.5），85-300V AC（PF≥0.9），50 / 60Hz，隔离驱动器，不可调光
•功率：9W
•输出通量：900-1000Lm，110Lm / W
•视角：360°
•光束颜色（CCT）：2700K-7000K可用
•cri（ra）：> 80
•更换：18W PL-C节能灯
•设计用于替换筒灯，嵌入式罐，烛台和天花板固定装置中的CFL。
•包装：彩盒

特征：
•类似尺寸和更高流明至CFL，易于更换
•铝制外壳，散热极佳
•过电压和过热保护
•高通量效率高达100Lm / W
•即时开启，无噪音，无闪光，无紫外线和红外线
•开关周期：≥15,000
•流明维持在6,000小时：≥90％
•工作温度范围：-25°C - 45°C
•长寿命可达50,000小时以上
•三年有限保修
•符合CE，RoHS标准

警告：
•不能用于全封闭灯具
•干燥位置
•不要混淆12V，120V，230V，277V输入电压
•电子镇流器必须旁路

其他：
•请放置标签“此照明设备的未来重新照明需要使用自镇流LED灯。镇流器已经在这个灯具旁路了。在夹具上。

Specification:
• Part number: HL-PL/L109D
• Description: patented 9W DIP LED PL-C corn lamps
• Basic size: 41(D)x152mm
• Materials: aluminum heatsink, integration design effectively solve the heat dissipation.
• Base: G24D/G24Q/GX23-2/G23-2/E26/E27/B22/E14 available
• Light source: Epistar 0.06W 8~9Lm Ф5.0mm DIP LED x 135pcs
• Input voltage: 85-265V AC (PF≥0.5), 85-300V AC (PF≥0.9), 50/60Hz, isolated driver, non-dimmable
• Wattage: 9W
• Output flux: 900-1000Lm, 110Lm/W
• View angle: 360°
• Beam color (CCT): 2700K-7000K available
• CRI (Ra): ﹥80
• Replace: 18W PL-C energy saving lamp
• Designed to replace CFL in Down lights, recessed cans, sconces, and ceiling fixtures.
• Package: color box

Features:
• Similar size and higher lumens to CFL, easy to replace
• Aluminum housing with very good heat dissipation
• Overvoltage and overheating protection
• High flux efficacy up to 100Lm/W
• Instant on, no noise, no flash, no UV and IR
• Switching cycles: ≥15,000
• Lumens maintenance at 6,000hrs: ≥90%
• Operating temperature range: -25°C - 45°C
• Long life up to more than 50,000 hours
• Three years limited warranty
• Comply with CE, RoHS standards

Caution:
• Can' t be used in fully enclosed luminaires
• Dry location only
• Don't confuse 12V, 120V, 230V, 277V input voltage
• Electronic ballast must be bypassed

Others:
• Please put label 'Future re-lamping of this luminaire requires the use of a self-ballasted LED lamp. The ballast has been bypassed in this fixture.' On fixtures.