Multi Functional Acrylic Shaping Machine
多功能亚克力成型机
议价
加入意向小型多功能亚克力成型机
| 特征 | ||||||||
| 1）对于闪烁着浮雕表面迹象！ 好的成本效益。 Ineasy和快速的操作！ 新来的犯人在真空，热成型的亚克力成型领域，具有多功能的成型过程中，可能十八丙烯酸和热熔性材料进三维浮雕在短短8分钟的形状。 | ||||||||
| 2）小服务区区域：不超过4平方米的最大的模型1426E | ||||||||
| 3）随着光weightness：不到1每吨最大的模型1426W | ||||||||
| 4）低功耗：0.9千瓦时-2.5千瓦时形成opertation的每一圈 | ||||||||
| 5）Simpe操作设计合理：操作简单方便，几个废物或材料的缺陷 | ||||||||
| 6）快速成型过程：对热和软的压克力材料由光engergy，只需要8-10分钟一株为向上的迹象，从放料进去，直到表面有斋形 | ||||||||
| 应用7）宽范围：没有限制到超薄灯箱材料的厚度，并没有影响到环境温度，甚至冷气候不影响生产 | ||||||||
| 8）省人力：一个perspnl可以处理的操作从开始到结束 | ||||||||
| 9）在简单的MODL制作：可能使模具成型无雕刻机。 它可以塑造丙烯酸系片材到表面，如平面，球状，弯曲的，并通过只是一个单一的手动自由浮雕刻平坦面的模具与硬木或高密度盘。 | ||||||||
| 10）的三维特性曲面精品意识：闪烁的机器形成的迹象，不仅有立体感强下的天灯，但也有很好提高照明均匀度在夜间。 | ||||||||
| 11）良好的市场和良好的效益：与机器产生弯曲的浮雕表面迹象的成本，比其他类似真空成型机生产的迹象明显降低，但在higter售价 | ||||||||
| 12）质量好，WASY维护：尤其是在出口标准生产的海外客户，出口型号1414E，1419E，1426E mormally出售前进行不同的严格的性能测试，还与运输震动型包装。 | ||||||||
| 13）压克力成型机的3-D Reliefing，我们通常称之为亚克力成型机，它是三维起毛机的真空吸塑行业的新来者，它既有熔化的功能，并在一次成型的材料 标志的过程。 和成形速度比正常超薄灯箱过程快2-3倍，进一步更可节省电能的30％以上。 它可以塑造了具有3-10cm表面上特别漂亮的浮雕标志，并具有较强的三维在募集形状。 模制成本比传统民泡罩成型机低，并且该设备是便宜的，速度快，对投资成本较低，应用范围越大，好处是较高等。 所有这些优势将使它更广阔的市场，在未来 | ||||||||
| 参数 | ||||||||
| 模型 | RC-1414 | RC-1419 | RC-1426 | |||||
| 电压/频率 | 220V / 50HZ | 220-380V / 50HZ | 380V / 50HZ | |||||
| 额定功率 | 9000瓦特 | 13500瓦特 | 18000瓦特 | |||||
| 能量消耗 | 0.9千瓦时/一次 | 1.2KWH /一次 | （2.5KWH /一次 | |||||
| 尺寸 | 1.4x1.4x1.1m | 1.4x1.9x1.1m | 1.4x2.6x1.1m | |||||
| Avaliable整形领域 | 130x130cm | 130x180cm | 130x250cm | |||||
| 成型时间 | 8-10分钟 | |||||||
| 包装尺寸 | 1.6x1.6x1.3m | 1.6x2.1x1.3m | 1.6x2.8x1.3m | |||||
| 净重 | 240KG | 330KG | 450KG | |||||
| 总重量 | 330KG | 430KG | 560KG | |||||
Small Size Multi Functional Acrylic Shaping Machine
| Features | ||||||||
| 1) For flashing signs with relievo surface! Good cost effective. Ineasy and fast operation! The new comer in acrylic moulding field of Vaccum-Thermoform, with multi-functions in moulding process, may shap acrylic and heat meltable materials into the shapes of 3-D relief in just 8 minutes. | ||||||||
| 2) in small locating area: Not more than 4 sqm for the largest model 1426E | ||||||||
| 3) With light weightness: Less than 0.5 ton for the largest model 1426W | ||||||||
| 4) Low power consumption: 0.9kwh-2.5kwh for each turn of forming opertation | ||||||||
| 5) Simpe operation with reasonable design: Easy and convenient operation, few waste or faults of materials | ||||||||
| 6) Fast shaping process: To heat and soft the acrylic materials by light-engergy, it only needs 8-10 minutes for froming up the signs, from put the material into it till the surface has beed shaped | ||||||||
| 7) Wide scope of application: No limits to the thickness of arcylic material, and no influence to the environmental temperature, even cold climate does not affect the production | ||||||||
| 8) Manpower saving: One perspnl can process the operation from the begin to finish | ||||||||
| 9) In easy modl making: May make shaping mold without engraving machine. It can shape acrylic sheet into surfaces such as flat, ball-like, curved, and relievo freely by just a single manual carved mold of flat surface with hardwood or high-density plate. | ||||||||
| 10) With fine sense of 3-dimensional characteristics for the curved surface: Flashing signs formed by the machine not only have strong stereoscopic sense under day light, but also have well raising lighting uniformity in the night. | ||||||||
| 11) Good market and good benefit: The cost of signs with curved relievo surface produced by the machine, is obviously lower than signs produced by other analogous vacuum forming machine, but in higter selling price | ||||||||
| 12) Good quality and wasy maintenance: Especially manufacture in export standard for oversea customers, the export models of 1414E, 1419E, 1426E mormally undertake varied strict performance tests before sale, also with shake-proof packing for transportation. | ||||||||
| 13) The Acrylic Moulding Machine For 3-D Reliefing, we normally call it Acrylic Shaping Machine, It is a new comer of three-dimensional raising machine in Vacuum-Thermoform industry, it has the functions of both melting and moulding the materials once during the process of signs. And the shaping speed is 2-3 times faster than normal arcylic process, further more it can save over 30% of electric energy. It can shape up signs with special beautiful relief of 3-10cm on the surface, and has a strong three dimension in the raising shape. The moulding cost is lower than tranditional blister moulding machines, and this equipment is cheaper, the speed is faster, the investing cost is lower, the application range is larger, the benefit is higher, etc.. All these advantages will make it a wider market in the future | ||||||||
| Parameter | ||||||||
| Model | RC-1414 | RC-1419 | RC-1426 | |||||
| Voltage/ Frequency | 220V/ 50Hz | 220-380V/ 50Hz | 380v/ 50Hz | |||||
| Rated Power | 9000 watt | 13500 watt | 18000 watt | |||||
| Power consumption | 0.9 KWH/ Once | 1.2KWH/ Once | (2.5KWH/ Once | |||||
| Dimension | 1.4x1.4x1.1m | 1.4x1.9x1.1m | 1.4x2.6x1.1m | |||||
| Avaliable shaping area | 130x130cm | 130x180cm | 130x250cm | |||||
| Forming time | 8-10 minutes | |||||||
| Packing dimension | 1.6x1.6x1.3m | 1.6x2.1x1.3m | 1.6x2.8x1.3m | |||||
| Net weight | 240KG | 330KG | 450KG | |||||
| Gross weight | 330KG | 430KG | 560KG | |||||
