议价
加入意向品牌:深海
型号:DSE5510
产地:英国

DSE5510是一个自动发动机控制模块,旨在提供先进的负载分布函数,用于柴油和燃气轮机,包括电子和非电子发动机。 该模块还提供了发动机监控和保护功能良好。
这些模块包括,具有内置的同步器为自动同步,并切换到非电动泵的同步功能。 提供直接和灵活的输出模块,允许对最常用的连接州长和自动电压调节器(AVR)。 这个模块被设计为向上结合到16的发电机,以及16和高达20的电源,在一个系统中,例如:16发生器和4电气(DSE5560必须与功率同步)
该模块有监视下电压/低电压,大电流,低电压/频率发生器,减速,加速,充电失败,紧急停车,低油压,水温高发电机的能力,无法启动,电池电压低/ 高直流电压,无法停止,发电机短路保护,逆功率,相序错误发电机,接地故障保护,损失,滴速信号无法开放,不是封闭的,不同步和MPU断路故障,负序和 励磁损耗。
二手
更多信息
主要特点:
电子发动机排量
RS232和RS485远程通讯
MODBUS RTU
前面板编程PIN密码保护
发动机运转计时器
背光LCD显示4行文字
多语言选项
为了测量电压
配置的输入(9)
可以被配置为输出(5)
自动启动
手动启动
声音报警
该LED指示灯
内置的转换器和AVR控制
引擎历史事件纪录
发动机保护
请注意特殊的个人电脑故障
前面板安装
在PC配置
电(电网)故障检测
配置报警定时器
可被配置成启动和停止计时器
自动负载转移
短信预警信息
多机通讯
遥控器
磁探测器
负荷分布功能:
根据的自动开始负载需求发电机和停止
发电机组自动平衡运行时间
非电电感应?
模块和负载分配线路连接接口现有
模块和州长和AVR直接沟通
本场比赛的电压和频率
和多个发电机千瓦和千乏负载分配
ROCOF和矢量转移
优点
发送短信告知相关的发动机(GSM调制解调器和SIM卡)的工程师具体问题
现场和远程模块配置
内置引擎诊断? 免除需要维修设备
发动机保护和测量仪器完成,不需要额外的传感器(只于电子引擎)
使用DSE远程监控模块全面的计算机软件
免费计算机软件
操作
模块使用stop /复位,手动,自动和启动按钮的前面板。 其中的三个按键,其中包括一个LED指示灯。 一个附加的按钮提供的液晶显示器,光测试,静音功能和断路器控制。
Brand: deep sea
Model: DSE5510
Place of origin : Britain

DSE5510 is an automatic engine control module, is designed to provide advanced load distribution function, used for diesel and gas turbine, including electronic and non electronic engine. The module also provides engine monitoring and protection function well.
Synchronization function of these modules including, with built-in synchronizer for automatic synchronization, and switching to non electric pump. Provide from direct and flexible output module, to allow the connection to the governor on the most commonly used and the automatic voltage regulator (AVR) . This module is designed to combine up to 16 generators, and 16 and up to the power of 20, in one system, for example: 16 generators and 4 Electric (DSE5560 must be synchronized with the power)
The module has the ability to monitor the generator under voltage / low voltage, high current, generator under voltage / frequency, less speed, speeding, charging failure, emergency shutdown, low oil pressure, high water temperature, can not start, battery low / high DC voltage, unable to stop, the generator short circuit protection, reverse power, phase sequence error generator, grounding fault protection, loss, dropping speed signal can not open, not closed, no synchronization and MPU circuit fault, negative phase sequence and the excitation loss.
Used
More information
Main features:
Electronic engine capacity
RS232 and RS485 remote communication
Modbus RTU
The front panel programming PIN password protection
Engine operation timer
Backlight LCD display 4 lines of text
Multi language options
To measure the voltage
configurable input (9)
Can be configured to output (5)
Automatic startup
The manual start
Sound the alarm
The LED indicator lamp
The built-in converter and AVR control
Engine historical event record
Engine protection
Notice the special personal computer fault
The front panel installation
The PC configuration
electric (grid) fault detection
Configurable alarm timer
Can be configured to start and stop the timer
Automatic load transfer
SMS warning information
Multi machine communication
The remote control
Magnetic probe
The load distribution function:
according to the load demand of the automatic start and stop of the generator
The generating set automatic balance running time
Non electric electric induction?
module and load distribution line connecting interface existing
module and the governor and the AVR direct communication
The voltage and frequency of the match
and multiple generators for KW and Kvar load distribution
ROCOF and vector shift
Advantage
Send text messages to inform the Engineer Specific problems related to engine (GSM modem and SIM card)
The on-site and remote module configuration
The built-in engine diagnosis? Dispense with the need for repair equipment
engine protection and measuring instrument complete, do not need additional sensors (only in the electronic engine)
comprehensive computer software using DSE remote monitoring module
Free computer software
Operation
Module using the front panel of the stop / reset, manual, automatic and the start button. One of three keys, including a LED indicating lamp. An additional button provides the liquid crystal display, light test, mute function and circuit breaker control.