201x7 Strong Base Anion Exchange Resin

201x7 Strong Base Anion Exchange Resin

201x7强碱性阴离子交换树脂

1200 USD

加入意向
201x7强碱性阴离子交换树脂
201x7强碱性阴离子交换树脂
201x7是凝胶型强碱性基于与季铵官能团的聚苯乙烯基质阴离子交换树脂。 201x7提供高吞吐量和稳定的质量。 201x7树脂与001X7树脂相结合,给出了混床优异的性能。
201x7是高容量的树脂不同水分条件下实现尽可能低的二氧化硅。 将树脂在高强度珠透明潮湿珠形式提供。 的树脂是适合于掺入顺流和逆流操作除盐系统。
用途: 201x7建议在去矿质系统的两床系统。 该树脂具有较低的二氧化硅和碳酸泄漏,从而给出了去矿质单位较高二氧化硅去除能力。
201x7也用作连同001X7作为获得抛光单元来实现在处理过的水和高纯度的水最低残留的二氧化硅的混合床树脂。 所述树脂也用在吸收过程中,弱酸,生化的,医药中间体的分离处理。
性能
矩阵 交联聚苯乙烯
官能团 季铵盐
离子形式 氯离子氯化物
物理形态 硬质温润珠
颗粒尺寸(mm) 0.315-1.25
水分含量 % 42-48
总交换容量(最小)当量/升 1.4
堆积密度或运输重量克/升 670-730
工作pH值范围 0-14
溶解性普通溶剂 不溶性
工作温度℃(最大值) 80
体积变化%(最大值):氯离子,以 哦- 25















建议的工作条件
床深度 仪表 1.0-3.0
再生剂浓度 % 4-5氢氧化钠
再生剂流量 M / H 4-6
再生接触时间 纪要 30-60
再生等级100% 树脂公斤/立方米 40-80氢氧化钠
冲洗流量 M / H 15-25
冲洗时间 纪要 25
运行流速 M / H 15-25












填料:
1铜 BIC仪表集装袋
25升袋
25千克袋
50千克塑料桶
201x7 Strong Base Anion Exchange Resin
201x7 Strong Base Anion Exchange Resin
201x7 is a Gel Type Strong Base Anion Exchange Resin based on polystyrene matrix with quaternary ammonium functional group. 201x7 gives high throughput and consistent quality. 201x7 resins in combination with 001x7 resins, gives excellent performance in mixed beds.
201x7 is high capacity resin which achieves lowest possible silica under varied water conditions. The resin is supplied in transparent moist bead form with high beads strength. The resin is suitable for demineralization system incorporating co-current and counter-current operations.
APPLICATIONS: 201x7 is recommended in the two bed system of demineralization system. The resin has a lower silica and carbonic acid leakages, hence gives higher silica removal capacity in demineralization units.
201x7 is also used as a mixed bed resin along with 001x7 as a polishing unit to achieve lowest residual silica in treated water and water of high purity is obtained. The resin is also used in absorption process, fractionalization process of weak acid, biochemical's and pharmaceutical intermediates.
PROPERTIES
Matrix Cross linked polystyrene
Functional Group Quaternary Ammonium
Ionic Form Cl- Chloride
Physical Form Hard moist beads
Particle Size (mm) 0.315-1.25
Moisture content % 42-48
Total Exchange Capacity (Min) eq/ ltr 1.4
Bulk Density or Shipping Weight gms/ ltr 670-730
Operating pH Range 0-14
Solubility in Common Solvents Insoluble
Operating Temperature℃ (max) 80
Volume change% (max) : Cl- to OH- 25















SUGGESTED OPERATING CONDITIONS
Bed Depth Meter 1.0-3.0
Regenerant Concentration % 4-5 NaOH
Regenerant Flow Rate M/ H 4-6
Regenerant Contact Time Minutes 30-60
Regeneration Level 100% Kgs/ m3 of resins 40-80 NaOH
Rinse Flow Rate M/ H 15-25
Rinse Time Minutes 25
Running Flow Rate M/ H 15-25












PACKING:
1 Cubic Meter Bulk Bag
25 Liter Bag
25 kg Bag
50 kg Plastic Barrel