001x10强酸性阳离子交换树脂 001x10是传统的凝胶聚(苯乙烯磺酸酯)的阳离子交换树脂的溢价高纯度。 其化学和物理稳定性,尤其是其对耐氧化性,非常低的提取物含量起着其在水去矿质成功雇用的很大一部分。
大小分级,确保在标准共流和逆流操作无故障运行。 分级阳离子树脂的较高密度球体确保了良好的反冲洗分离以推荐的流速。 较高的10%的交联会给大大增加了生活在那里的树脂降解,由于氧化作用的预期,如凝结水软化。 低比例肿胀穷尽到再生的形式转换允许时重新在疲惫周期服务树脂层应无压缩的领域。 这可确保服务过程中低压降。 该树脂是在这两个Na +和H +的形式提供。
用途: 001x10可以用在多床除盐用强碱性阴离子交换剂,如201x4,202和D201.001X10也非常适合于工业应用的软化。 它具有DVB比001x8的更高的水平。 这给001x10使用寿命更长软化侵蚀性水时。
性能
|
| 矩阵 | 交联聚苯乙烯 |
| 官能团 | SO3磺酸 |
| 离子形式 | 钠离子 |
| 物理形态 | 硬质温润珠 |
| 颗粒尺寸(mm) | 0.315-1.25 |
| 均匀系数 | 1.6 |
| 水分含量 % | 38-43 |
| 总交换容量(最小)当量/升 | 2.2 |
| 堆积密度或运输重量克/升 | 800-880 |
| 操作PH值范围 | 0-14 |
| 溶解度在普通溶剂 | 不溶性 |
| 工作温度℃(最大值) | 140 |
| 体积变化%(最大值):钠离子与H + | 5 |
建议的工作条件
|
| 床深度 | 仪表 | 0.6-3.0 |
| 再生剂浓度 | % | 10-15氯化钠 4-10盐酸 1-5 H2SO4 |
| 再生剂流量 | BV /小时 | 2-8 |
| 再生接触时间 | 纪要 | 30-60
|
| 再生等级100% | 树脂公斤/立方米 | 48-320氯化钠 80-320盐酸 |
填料:
1Cubic仪表集装袋
25Liter袋
每袋25kg
50kg塑料桶
|
| 001x10 Strong Acid Cation Exchange Resin |
|
001x10 Strong Acid Cation Exchange Resin 001x10 is a premium high purity grade of conventional gel poly (styrene sulfonate) cation exchange resin. Its chemical and physical stability, particularly its resistance to oxidation and very low extractables content plays a large part in its successful employment in demineralization of water.
The size grading ensures trouble free operation in both standard co-flow and counter-flow operation. The higher density spheres of the graded cation resin ensures good backwash separation at the recommended flow rates. The higher 10% cross-linking will give greatly increased life where resin degradation due to oxidative effects are anticipated such as in condensate softening. The low percentage swelling on conversion from exhausted to regenerated form allows the resin bed to be free of compacted areas when reintroduced to service in the exhaustion cycle. This ensures low pressure drop during service. The resin is available in both Na+ and H+ form.
APPLICATIONS: 001x10 can be used in multiple bed demineralizers with strongly basic anion exchangers such as 201x4, 202 and D201.001X10 is also ideally suited for industrial softening applications. It has a higher level of DVB than 001x8. This gives 001x10 a longer service life when softening aggressive waters.
PROPERTIES
|
| Matrix | Cross linked polystyrene |
| Functional Group | SO3 Sulfonic |
| Ionic Form | Na ﹢ |
| Physical Form | Hard moist beads |
| Particle Size (mm) | 0.315-1.25 |
| Uniformity Coefficient | 1.6 |
| Moisture Content % | 38-43 |
| Total Exchange Capacity (Min) eq/ ltr | 2.2 |
| Bulk density or shipping weight gms/ ltr | 800-880 |
| Operating PH range | 0-14 |
| Solubility in common solvents | Insoluble |
| Operating Temperature ℃ (max) | 140 |
| Volume change% (max) : Na + to H + | 5 |
SUGGESTED OPERATING CONDITIONS
|
| Bed Depth | Meter | 0.6-3.0 |
| Regenerant Concentration | % | 10-15 NaCl 4-10 HCl 1-5 H2SO4 |
| Regenerant Flow Rate | BV/ Hour | 2-8 |
| Regenerant Contact Time | Minutes | 30-60
|
| Regeneration Level 100% | Kgs/ m3 of resins | 48-320 NaCl 80-320 HCl |
PACKING:
1Cubic Meter Bulk Bag
25Liter Bag
25kg Bag
50kg Plastic Barrel