D202 Macroporous Strong Base Anion Exchange Resin
D202大孔强碱性阴离子交换树脂
议价
加入意向 |
| D202大孔强碱性阴离子交换树脂 |
D202是一种高效，耐用II强碱型大孔离子交换器提供的操作相当于凝胶型阴离子树脂极高的容量。
D202拥有碱度比I型树脂，因此显示出更大的再生效率和运营能力相比，I型树脂相当于再生的水平略低。 D202的大孔性质确保在去矿质一致的长期性能和去碱化的水。 D202建议，其中去除强以及弱酸有必要在高的再生效率。 然而，由于略低碱度，二氧化硅泄漏被略微高于I型阴离子树脂。
D202拥有碱度比I型树脂，因此显示出更大的再生效率和运营能力相比，I型树脂相当于再生的水平略低。 D202的大孔性质确保在去矿质一致的长期性能和去碱化的水。 D202建议，其中去除强以及弱酸有必要在高的再生效率。 然而，由于略低碱度，二氧化硅泄漏被略微高于I型阴离子树脂。
| 性能 | |
| 矩阵 | 大孔苯乙烯交联DVB |
| 官能团 | 季铵盐二 |
| 离子形式 | 氯离子氯化物 |
| 物理形态 | 硬质温润珠 |
| 颗粒尺寸（mm） | 0.315-1.25 |
| 水分含量 ％ | 47-57 |
| 总交换容量（最小）当量/升 | 1.2 |
| 堆积密度或运输重量克/升 | 680-730 |
| 均匀系数（最大值） | 1.6 |
| 工作pH范围 | 0-14 |
| 溶解度在普通溶剂 | 不溶性 |
| 工作温度℃（最大值） | 60 |
| 体积变化％（最大值）：氯离子，以 | 9 |
| 建议的工作条件 | ||
| 床的深度（最小值） | 仪表 | 0.6 |
| 再生剂浓度 | % | 4-8氢氧化钠 |
| 再生接触时间 | 纪要 | 15-60 |
| 再生等级100％ | 树脂公斤/立方米 | 40-160氢氧化钠 |
| 运行流速 | BV /小时 | 5-40 |
:
填料：
1Cubic仪表集装袋
25Liter袋
每袋25kg
50kg塑料桶
|
| D202 Macroporous Strong Base Anion Exchange Resin |
D202 is a highly efficient and durable strong base type II macroporous anion exchanger offering an exceptionally high operating capacity equivalent to gel type anion resin.
D202 has slightly lower basicity than Type I resins and as such shows greater regeneration efficiency and operating capacity at equivalent regeneration levels compared to Type I resins. The macroporous nature of D202 ensures consistent long-term performance in demineralization and de-alkalization of water. D202 is recommended where removal of strong as well as weak acids is necessary at high regeneration efficiencies. However, due to slightly lower basicity, silica leakage is marginally higher compared to Type I anion resins.
D202 has slightly lower basicity than Type I resins and as such shows greater regeneration efficiency and operating capacity at equivalent regeneration levels compared to Type I resins. The macroporous nature of D202 ensures consistent long-term performance in demineralization and de-alkalization of water. D202 is recommended where removal of strong as well as weak acids is necessary at high regeneration efficiencies. However, due to slightly lower basicity, silica leakage is marginally higher compared to Type I anion resins.
| PROPERTIES | |
| Matrix | Macroporous Styrene Cross-linked with DVB |
| Functional Group | Quaternary Ammonium II |
| Ionic Form | Cl- Chloride |
| Physical Form | Hard moist beads |
| Particle Size (mm) | 0.315-1.25 |
| Moisture Content % | 47-57 |
| Total Exchange Capacity (Min) eq/ ltr | 1.2 |
| Bulk density or shipping weight gms/ ltr | 680-730 |
| Uniformity Coefficient (Max) | 1.6 |
| Operating pH range | 0-14 |
| Solubility in common solvents | Insoluble |
| Operating Temperature℃ (max) | 60 |
| Volume Change% (max) : Cl- to | 9 |
| SUGGESTED OPERATING CONDITIONS | ||
| Bed Depth (Min) | Meter | 0.6 |
| Regenerant Concentration | % | 4-8 NaOH |
| Regenerant Contact Time | Minutes | 15-60 |
| Regeneration Level 100% | Kgs/ m3 of resins | 40-160 NaOH |
| Running Flow Rate | BV/ Hour | 5-40 |
:
PACKING:
1Cubic Meter Bulk Bag
25Liter Bag
25kg Bag
50kg Plastic Barrel
