MB6150抛光混床树脂

Danhao™MB6150 - 超纯水生产混床树脂

MB6150是用于反渗透后使用在高纯度的水系统阳离子和阴离子交换树脂的完全再生的混合床。 这种混合床产品特别适用于高纯度水为特种电子应用如磁盘驱动器，显示设备，光盘，分立的半导体器件的制造的抛光使用时，较低的密度集成电路芯片，或在后端 芯片切割和安装操作。

这是一个随时可以使用的混床树脂，适合填充墨盒或大压力容器，并用尽后不能再生。 Danhao™MB6150可以用TOC含量低于20ppb的提供18 Megohm.cm质量的水。

使用限度： MB6150不可再生的混床树脂是工业用途。 对于所有其他特殊应用，如制药，食品加工或饮用水的应用程序，建议所有潜在用户寻求以确定最佳树脂选择最佳操作条件的建议，从Danhao贸易公司或当地的树脂供应商或分销商。

MB6150 Polishing Mixed-Bed Resin

Danhao™ MB6150 – Ultra-Pure Water Production Mixed-Bed Resin

MB6150 is a fully regenerated mixed bed of cation and anion exchange resins intended for use in high purity water systems after reverse osmosis. This mixed bed product is particularly suitable for use in the polishing of high purity water for specialty electronics applications such as the manufacturing of disk drives, display devices, CD-ROMs, discrete semiconductor devices, lower density IC chips, or in the back-end chip dicing and mounting operations.

It is a ready-to-use mixed bed resins, suitable for the refillable cartridges or big pressure vessel, and after exhaustion it can not be regenerated. Danhao™ MB6150 could deliver 18 Megohm﹒cm quality water with TOC levels below 20 ppb.

LIMITS OF USE: MB6150 non-regenerable mixed bed resin is industrial uses. For all other specific applications such as pharmaceutical, food processing or potable water applications, it is recommended that all potential users seek advice from Danhao Trading corporation or your local resin suppliers or distributors in order to determine the best resin choice and optimum operating conditions.