PDC金刚石钻进位

1）优化设计的有点轮廓钻软至中地层。

2）Cuttingstructure是力平衡和位刀片的非对称设计，使对位thatthe负载均衡是导致该位的稳定性更好。

3）Maincutters是19.05毫米或13.44毫米或8.0毫米高性能PDC刀具以insureservice钻头的使用寿命，同时提高机械钻速。

4）Cutterexposure进行了优化，以确保该位可以实现软tomedium地层更高的ROP。

5）深junkslot设计提升岩屑位的去除能力，以obtainhigh ROP。

6）位的Hydraulicsystem利用动态流动图形仿真technologyto增强的清洗和冷却钻头的效果，有效地防止bitfrom泥包被优化。

OurProduct优点：

配有高档PCD齿1. PCD凹位;
2. 45号钢为钻头体;
3. 10年以上manufacturering经验;
4.固体的质量;

5.切割机布局是力平衡钻一个精确的圆孔，减少钻头涡动;

6.大垃圾槽和冲洗端口;

更快的渗透7.先进的几何设计;

PDC Diamond Drilling Bit

1) Optimally designed bit profile for drilling soft to medium formations.

2) Cuttingstructure is force balanced and bit blade is asymmetrically designed so thatthe load on bit is balanced that resulting better stability of the bit.

3) Maincutters are 19.05mm or 13.44mm or 8.0mm high performance PDC cutters to insureservice life of the bit while improving ROP.

4) Cutterexposure is optimized to insure the bit can achieve higher ROP in soft tomedium formations.

5) Deep junkslot design to enhance cuttings removal ability of the bit in order to obtainhigh ROP.

6) Hydraulicsystem of the bit is optimized using dynamic flow pattern simulation technologyto enhance cleaning and cooling effects of the bit to effectively prevent bitfrom balling.

OurProduct Advantages:

1. PCD concave bit with premium PCD teeth;
2. No. 45 steel as the drill bit body;
3. Over 10 years manufacturering experience;
4. Solid quality;

5. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl;

6. Large junk slots and flushing ports;

7. Advanced geometric design for faster penetration;