Multifunction Network Cable Tester, The Function of Probing the Audio and Tracing the Cable
多功能网络电缆测试仪，探测音频和跟踪电缆的功能
- 特征：
- 一个人足以完成电缆连续性检查
- 探测音频和跟踪电缆的功能
- 检查网络电缆故障，如开路，短路，跳线，反向连接或串扰干扰
- 测量电缆长度并确定开路和短路的距离
- 动态校准电缆长度，使长度测量精确到95％
- 远端识别器与提示语音
- 自检功能，并自动补偿电池容量或环境温度的任何变化
- 单板计算机软件看门狗设计和可靠操作
- 产品规格：
- 外形尺寸：
- 主要测试仪：180x80x40mm
- 接收器：218x46x29mm
- 远程标识符：77x31x21mm
- 电源：主测试仪使用6V直流电源供电，接收器采用9V电池供电
- 显示：特殊4 x 16字大屏幕液晶格（有效视野61.6 x 25.2mm）
- 测试电缆类型：STP / UTP双绞线，同轴电缆，电话线
- 检测电缆类型：5E，6E，电话线，同轴电缆等金属线
- 工作环境温度：-10- +60ºC
- 测试端口：测试仪RJ45主端口（M），测试仪LOOPBACK RJ45端口（L），寻线RJ45端口（SCAN），远程标识符RJ45端口（R），额外的BNC和RJ11转换器用于测量和检查同轴电缆和电话线
- 双绞线长度测量：
- 适用范围：1-350M（3〜200英尺）
- 校准精度：3％（+/- 0.5M或+/- 1.5 ft）（校准电缆> 5M）
- 装运精度：5％（+/- 0.5M或+/- 1.5英尺）。 （AMP，AT＆T Class 5电缆）
- 显示：M或ft
- 长度校准：用户可以用给定长度的电缆自己设置校准因子
- 校准电缆长度大于5M
- 线序和定位电缆错误：检查诸如开路，短路，反向连接，交叉或串扰干扰等错误
- 定位电缆：8个远程标识符测试插孔（ID 1≥ID 8）
- 自动延时关断时间：测试仪不工作30分钟
- 外形尺寸：
- Feature:
- One person enough to complete cable continuity check
- The function of probing the audio and tracing the cable
- Check network cable faults, such as open, short, jumper wire, reverse connection or cross-talk interference
- Measure cable length and determine the distance of open and short circuit
- Dynamically calibrate cable length and make length measurement as accurate as 95%
- Far-end recognizer with prompting voice
- Self-checking function and automatically compensate any change in battery capacity or ambient temperature
- Single board computer software watchdog design and reliable operation
- Specifications:
- Overall dimension:
- Main tester: 180x80x40mm
- Receiver: 218x46x29mm
- Remote identifier: 77x31x21mm
- Power: main tester uses 6V DC for power supply, receiver uses 9V battery for power supply
- Display: special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2mm)
- Type of cable tested: STP/UTP twin twisted cable, coaxial cable, telephone line
- Type of cable detected: 5E, 6E, telephone wire, coaxial cable and other metal wires
- Ambient temperature in work: -10-+60ºC
- Tester port: tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), hunting RJ45 port (SCAN), remote identifier RJ45 port (R), the extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
- Length measurement of twin twisted cable:
- Scope: 1-350M (3 ~200 ft)
- Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft) (calibrating cable ﹥ 5M)
- Shipment accuracy: 5% (+/- 0.5M or +/- 1.5 ft). (AMP, AT&T Class 5 cable)
- Display: M or ft
- Length calibration: user can set calibration factor by himself with a given length cable
- Length of calibrating cable is more than 5M
- Wire sequence and locating cable error: check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference
- Locating cable: 8 remote identifier test jacks (ID 1 ≥ ID 8)
- Automatic time-delay shut off time: the tester does not operate for 30 minutes
- Overall dimension:
